Hi, On Sep 1 2016 09:52, lin-alsa@xxxxxxxxxxxxx wrote: > This issue went away for a while, sorry for the radio silence. I'm now > running 4.4.17-rt25-1-rt-lts. I believe that the relevant driver was > merged into mainline since then. The firewire-digi00x module was exactly merged to Linux 4.4. See: https://ieee1394.wiki.kernel.org/index.php/Release_Notes#Linux_4.4 > I've had a little more time to do some debugging, and I've discovered > that the mixer connected light goes on and off a few times before > turning off and requiring a hard reboot. Hm. I have never experienced this kind of issue. For my information, please show your OHCI 1394 host controller? Typically, 'lspci' is good for this purpose. For your information, I wrote 'hinawa-dg00x-cui' for this series of units. It's in my repository in github.com: https://github.com/takaswie/hinawa-utils If you install libhinawa, gir1.2-hinawa-1.0, Python3 and PyGobject, the command allows you to control your unit somewhat. For example, when you change the mode of optical digital input interface, please run: $ ./hinawa-dg00x-cui 1 optical-interface set ADAT You can see all of sub-commands: $ ./hinawa-dg00x-cui 1 And see parameters for each sub-commands just by run with the sub-command: $ ./hinawa-dg00x 1 optical-interface ALSA digi00x module still has several issues, but I think you have no interests in it and don't address to it. Regards Takashi Sakamoto _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
