Am Donnerstag, 14. Oktober 2010, 17:39:13 schrieb Daniel Mack: > Well, even if it was, you should hear some sound. It might be distorted, > but if you don't get any output, the reason is somewhere else. > > Did you check the schematics of your board in comparison to the > reference diagrams in the codec's datasheet? Are there any other things > to be considered maybe? > > What about the voltage levels? Are they within the specs? I had a quick > look and it seems that Vdd on the codec has to be within 3.0 .. 3.6V, > while the signals you provide rather seem to be in the range of 5V? The > absolute maximum ratings say that Vdd must not be greater than 4.0V. Sorry for one more off-topic mail, but I rechecked it. Digital Input Voltage is -0.3V to 6.5V, so my 5V clock voltage should be fine imho. Vdd is 3.0V on my board... Do you maybe have any other thoughts what might be wrong here? -Julian _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
