At Sun, 2 Nov 2008 17:02:51 +0100, Michael Gruber wrote: > > On Sun, Nov 2, 2008 at 12:23, Takashi Iwai <tiwai@xxxxxxx> wrote: > > At Sat, 1 Nov 2008 13:43:25 +0100, > > Michael Gruber wrote: > >> > >> Backstory: > >> The patch "ALSA: hda - Add infrastructure for dynamic stream allocation" > >> http://git.alsa-project.org/?p=alsa-kmirror.git;a=commit;h=ae32c9fe811fed22715342494c08a11fabc87762 > >> broke the detection of my card. With this patch applied the dmesg output is: > >> > >> [ 3761.464838] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, > >> low) -> IRQ 16 > >> [ 3761.464863] PCI: Setting latency timer of device 0000:00:1b.0 to 64 > >> [ 3761.499927] ACPI: PCI interrupt for device 0000:00:1b.0 disabled > >> [ 3761.499945] HDA Intel: probe of 0000:00:1b.0 failed with error -22 > > > > Could you check whether you get any other error messages with > > CONFIG_SND_DEBUG=y? > > > >> When I loaded the module with model=... then it would work only for some > >> models, but not for others. I found out that the ones which worked were the > >> ones with a digout. I added the digout to the F1734 model and now it is > >> working again. > >> > >> I can't test if the digout is really working because I lack the hardware, but > >> when I turn on the IEC958 control in the mixer then red light is emitted from > >> my headphone port. > >> > >> I will attach a patch that adds digout to this model because this seems the > >> right thing to do, but I don't know whether there is something wrong with the > >> aforementioned patch that caused my problem in the first place. > > > > Yeah, it shouldn't break the existing thing, at least. > > > > > > thanks, > > > > Takashi > > > > [ 261.045920] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, > low) -> IRQ 16 > [ 261.045945] PCI: Setting latency timer of device 0000:00:1b.0 to 64 > [ 261.045949] ALSA > /home/*/Desktop/test-alsa/alsa-driver/pci/hda/../../alsa-kernel/pci/hda/hda_intel.c:2130: > chipset global capabilities = 0x4401 > [ 261.076055] ALSA > /home/*/Desktop/test-alsa/alsa-driver/pci/hda/../../alsa-kernel/pci/hda/hda_intel.c:771: > codec_mask = 0x3 > [ 261.079523] ALSA > /home/*/Desktop/test-alsa/alsa-driver/pci/hda/hda_codec.c:2579: > hda_codec: model 'F1734' is selected for config 1734:107c (FSC F1734) > [ 261.079920] ACPI: PCI interrupt for device 0000:00:1b.0 disabled > [ 261.079933] HDA Intel: probe of 0000:00:1b.0 failed with error -22 So, you're building from alsa-driver tree, not directly the kernel git? Then try the latest snapshot below first, ftp://ftp.kernel.org/pub/linux/kernel/people/tiwai/snapshot/alsa-driver-snapshot.tar.gz Then build with --with-debug=detect configure option. This will give you more information, I guess. thanks, Takashi _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
