On Sun, Nov 2, 2008 at 12:23, Takashi Iwai <tiwai@xxxxxxx> wrote: > At Sat, 1 Nov 2008 13:43:25 +0100, > Michael Gruber wrote: >> >> Backstory: >> The patch "ALSA: hda - Add infrastructure for dynamic stream allocation" >> http://git.alsa-project.org/?p=alsa-kmirror.git;a=commit;h=ae32c9fe811fed22715342494c08a11fabc87762 >> broke the detection of my card. With this patch applied the dmesg output is: >> >> [ 3761.464838] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, >> low) -> IRQ 16 >> [ 3761.464863] PCI: Setting latency timer of device 0000:00:1b.0 to 64 >> [ 3761.499927] ACPI: PCI interrupt for device 0000:00:1b.0 disabled >> [ 3761.499945] HDA Intel: probe of 0000:00:1b.0 failed with error -22 > > Could you check whether you get any other error messages with > CONFIG_SND_DEBUG=y? > >> When I loaded the module with model=... then it would work only for some >> models, but not for others. I found out that the ones which worked were the >> ones with a digout. I added the digout to the F1734 model and now it is >> working again. >> >> I can't test if the digout is really working because I lack the hardware, but >> when I turn on the IEC958 control in the mixer then red light is emitted from >> my headphone port. >> >> I will attach a patch that adds digout to this model because this seems the >> right thing to do, but I don't know whether there is something wrong with the >> aforementioned patch that caused my problem in the first place. > > Yeah, it shouldn't break the existing thing, at least. > > > thanks, > > Takashi > [ 261.045920] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 261.045945] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 261.045949] ALSA /home/*/Desktop/test-alsa/alsa-driver/pci/hda/../../alsa-kernel/pci/hda/hda_intel.c:2130: chipset global capabilities = 0x4401 [ 261.076055] ALSA /home/*/Desktop/test-alsa/alsa-driver/pci/hda/../../alsa-kernel/pci/hda/hda_intel.c:771: codec_mask = 0x3 [ 261.079523] ALSA /home/*/Desktop/test-alsa/alsa-driver/pci/hda/hda_codec.c:2579: hda_codec: model 'F1734' is selected for config 1734:107c (FSC F1734) [ 261.079920] ACPI: PCI interrupt for device 0000:00:1b.0 disabled [ 261.079933] HDA Intel: probe of 0000:00:1b.0 failed with error -22 That is all. _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
