At Sat, 1 Nov 2008 13:43:25 +0100, Michael Gruber wrote: > > Backstory: > The patch "ALSA: hda - Add infrastructure for dynamic stream allocation" > http://git.alsa-project.org/?p=alsa-kmirror.git;a=commit;h=ae32c9fe811fed22715342494c08a11fabc87762 > broke the detection of my card. With this patch applied the dmesg output is: > > [ 3761.464838] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, > low) -> IRQ 16 > [ 3761.464863] PCI: Setting latency timer of device 0000:00:1b.0 to 64 > [ 3761.499927] ACPI: PCI interrupt for device 0000:00:1b.0 disabled > [ 3761.499945] HDA Intel: probe of 0000:00:1b.0 failed with error -22 Could you check whether you get any other error messages with CONFIG_SND_DEBUG=y? > When I loaded the module with model=... then it would work only for some > models, but not for others. I found out that the ones which worked were the > ones with a digout. I added the digout to the F1734 model and now it is > working again. > > I can't test if the digout is really working because I lack the hardware, but > when I turn on the IEC958 control in the mixer then red light is emitted from > my headphone port. > > I will attach a patch that adds digout to this model because this seems the > right thing to do, but I don't know whether there is something wrong with the > aforementioned patch that caused my problem in the first place. Yeah, it shouldn't break the existing thing, at least. thanks, Takashi _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxx http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
