>> Instead of changing the suspend sequence, can we please try to modify the >> max98373_io_init() routine to unconditionally flag the cache as dirty, maybe >> this points to a problem with the management of the >> max98373->first_hw_init flag. > > max98373_io_init() is not called because ' sdw_slave_status' remains > ' SDW_SLAVE_ATTACHED' and 'max98373->hw_init' is already true. > Removing 'if (max98373->hw_init || status != SDW_SLAVE_ATTACHED)' > condition in max98373_update_status() function instead of adding > regcache_mark_dirty() into max98373_suspend() can be an alternative way. > I think it is all about where regcache_mark_dirty() is called from. > The difference is that max98373_io_init() really do the software reset and > do amp initialization again which could be an overhead. that description is aligned with my analysis that there's something very wrong happening here, it's not just a simple miss in the regmap handling but a major conceptual bug or misunderstanding in the way reset is handled. First, there's the spec: on a reset initiated by the host or if the device loses sync for ANY reason, its status cannot remain ATTACHED. There's got to be a 16-frame period at least where the device has to monitor the sync pattern and cannot drive anything on the bus. Then there's the hardware behavior on resume: on resume by default the Intel host will toggle the data pin for at least 4096 frames, which by spec means severe reset. And last, there's the software init: we also force the status as UNATTACHED in drivers/soundwire/intel.c: /* * make sure all Slaves are tagged as UNATTACHED and provide * reason for reinitialization */ sdw_clear_slave_status(bus, SDW_UNATTACH_REQUEST_MASTER_RESET); But we've also seen the opposite effect of an amplifier reporting attached but losing sync immediately after the end of enumeration and never coming back on the bus, see issue https://github.com/thesofproject/linux/issues/3063 In other words, we need to check what really happens on resume and why the amplifier keeps reporting its status as ATTACHED despite the spec requirements and software init, or loses this status after enumeration....Something really does not add-up, again it's not just a regmap management issue.