> +struct apm_sub_graph_params {
> + struct apm_module_param_data param_data;
> + uint32_t num_sub_graphs;
> + struct apm_sub_graph_data sg_cfg[];
> +} __packed;
The style you use is num_foobar and later foobar[]
> +/* container config */
> +struct apm_container_obj {
> + struct apm_container_cfg container_cfg;
> + /* Capability ID list */
> + struct apm_prop_data cap_data;
> + uint32_t num_capability_id;
> + uint32_t capability_id;
but here you have both a num_capability_id and capability_id
It's not very clear what they mean, or if there is a dependency?
> + /* Container graph Position */
> + struct apm_prop_data pos_data;
> + struct apm_cont_prop_id_graph_pos pos;
> +
> + /* Container Stack size */
> + struct apm_prop_data stack_data;
> + struct apm_cont_prop_id_stack_size stack;
> +
> + /* Container proc domain id */
> + struct apm_prop_data domain_data;
> + struct apm_cont_prop_id_domain domain;
> +} __packed;
> +/* Module IDs */
> +#define MODULE_ID_WR_SHARED_MEM_EP 0x07001000
> +#define MODULE_ID_RD_SHARED_MEM_EP 0x07001001
> +#define MODULE_ID_GAIN 0x07001002
> +#define MODULE_ID_PCM_CNV 0x07001003
> +#define MODULE_ID_PCM_ENC 0x07001004
> +#define MODULE_ID_PCM_DEC 0x07001005
> +#define MODULE_ID_CODEC_DMA_SINK 0x07001023
> +#define MODULE_ID_CODEC_DMA_SOURCE 0x07001024
> +#define MODULE_ID_I2S_SINK 0x0700100A
> +#define MODULE_ID_I2S_SOURCE 0x0700100b
> +#define MODULE_ID_DATA_LOGGING 0x0700101A
> +
> +#define APM_CMD_GET_SPF_STATE 0x01001021
> +#define APM_CMD_RSP_GET_SPF_STATE 0x02001007
> +
> +#define APM_MODULE_INSTANCE_ID 0x00000001
> +#define PRM_MODULE_INSTANCE_ID 0x00000002
> +#define AMDB_MODULE_INSTANCE_ID 0x00000003
> +#define VCPM_MODULE_INSTANCE_ID 0x00000004
> +#define AR_MODULE_INSTANCE_ID_START 0x00006000
> +#define AR_MODULE_INSTANCE_ID_END 0x00007000
> +#define AR_MODULE_DYNAMIC_INSTANCE_ID_START 0x00007000
> +#define AR_MODULE_DYNAMIC_INSTANCE_ID_END 0x00008000
> +#define AR_CONT_INSTANCE_ID_START 0x00005000
> +#define AR_CONT_INSTANCE_ID_END 0x00006000
> +#define AR_SG_INSTANCE_ID_START 0x00004000
> +
> +#define APM_CMD_GRAPH_OPEN 0x01001000
> +#define APM_CMD_GRAPH_PREPARE 0x01001001
> +#define APM_CMD_GRAPH_START 0x01001002
> +#define APM_CMD_GRAPH_STOP 0x01001003
> +#define APM_CMD_GRAPH_CLOSE 0x01001004
> +#define APM_CMD_GRAPH_FLUSH 0x01001005
> +#define APM_CMD_SET_CFG 0x01001006
> +#define APM_CMD_GET_CFG 0x01001007
> +#define APM_CMD_SHARED_MEM_MAP_REGIONS 0x0100100c
> +#define APM_CMD_SHARED_MEM_UNMAP_REGIONS 0x0100100d
> +#define APM_CMD_RSP_SHARED_MEM_MAP_REGIONS 0x02001001
> +#define APM_CMD_RSP_GET_CFG 0x02001000
> +#define APM_CMD_CLOSE_ALL 0x01001013
> +#define APM_CMD_REGISTER_SHARED_CFG 0x0100100A
> +/* APM module */
> +#define APM_PARAM_ID_SUB_GRAPH_LIST 0x08001005
> +
> +#define APM_PARAM_ID_MODULE_LIST 0x08001002
> +#define APM_PARAM_ID_MODULE_PROP 0x08001003
It seems like those definition follow a pattern, e.g. bits 28..32 a type
and bits 0..15 a token?
>
