> -----Original Message-----
> From: Pierre-Louis Bossart <pierre-louis.bossart@xxxxxxxxxxxxxxx>
> Sent: Monday, September 27, 2021 7:55 AM
> To: Ryan Lee <RyanS.Lee@xxxxxxxxxxxxxxxxxxx>; lgirdwood@xxxxxxxxx;
> broonie@xxxxxxxxxx; perex@xxxxxxxx; tiwai@xxxxxxxx; yung-
> chuan.liao@xxxxxxxxxxxxxxx; guennadi.liakhovetski@xxxxxxxxxxxxxxx; alsa-
> devel@xxxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx
> Cc: sathya.prakash.m.r@xxxxxxxxx; ryan.lee.maxim@xxxxxxxxx
> Subject: [EXTERNAL] Re: [PATCH] ASoC: max98373: Mark cache dirty before
> entering sleep
>
> EXTERNAL EMAIL
>
>
>
> On 9/24/21 5:13 PM, Ryan Lee wrote:
> > Amp lose its register values in case amp power loss or 'ForceReset'
> > over Soundwire SCP_ctrl register(0x0044) or HW_RESET pin control
> > during the audio suspend and resume.
> > Mark cache dirty before audio suspension to restore existing values
> > when audio resume.
> >
> > Signed-off-by: Ryan Lee <ryans.lee@xxxxxxxxxxxxxxxxxxx>
> > ---
> > sound/soc/codecs/max98373-sdw.c | 1 +
> > 1 file changed, 1 insertion(+)
> >
> > diff --git a/sound/soc/codecs/max98373-sdw.c
> > b/sound/soc/codecs/max98373-sdw.c index dc520effc61c..a7e4a6e880b0
> > 100644
> > --- a/sound/soc/codecs/max98373-sdw.c
> > +++ b/sound/soc/codecs/max98373-sdw.c
> > @@ -259,6 +259,7 @@ static __maybe_unused int
> max98373_suspend(struct device *dev)
> > regmap_read(max98373->regmap, max98373->cache[i].reg,
> > &max98373->cache[i].val);
> >
> > regcache_cache_only(max98373->regmap, true);
> > + regcache_mark_dirty(max98373->regmap);
>
> We already do the following sequence in max98373_io_init() when the
> amplifier re-attaches:
>
> if (max98373->first_hw_init) {
> regcache_cache_bypass(max98373->regmap, false);
> regcache_mark_dirty(max98373->regmap);
> }
>
> I don't see what marking the cache as dirty on suspend might do, we will do a
> sync only in the resume step.
>
> IIRC this is a patch that we've seen before and removed since it wasn't
> aligned with any other codec driver.
>
> Does this actually improve anything?
Yes, it does. There was an mute problem report due to amp register reset
during suspend/resume. and we confirmed that the modification
is effective. (https://partnerissuetracker.corp.google.com/issues/194472331)
The added code helps to re-write valid values in cache to the amp hardware
when audio resume. Same code was there on i2c driver, but not on Soundwire
driver.
>
