Takashi Iwai wrote:
> At Thu, 29 Jun 2006 20:41:03 +0200,
> Daniel Schroeder wrote:
>>>> --------------------------
>>>> headphone jack in front: if connected the regular sound isnt muted.
>>>> --------------------------
>>>> speaker test hangs in surround51 configuration:
>>>>
>>>> speaker-test -Dplug:surround51 -c6
>>>>
>>>> speaker-test 1.0.12rc1
>>>>
>>>> Playback device is plug:surround51
>>>> Stream parameters are 48000Hz, S16_LE, 6 channels
>>>> Using 16 octaves of pink noise
>>>> Rate set to 48000Hz (requested 48000Hz)
>>>> Buffer size range from 22 to 5461
>>>> Period size range from 11 to 2730
>>>> Using max buffer size 5460
>>>> Periods = 4
>>>> was set period_size = 1365
>>>> was set buffer_size = 5460
>>>> 0 - Front Left
>>>> ---- hangs forever
>>> That's bad. Does aplay with 6 channel samples work fine?
>> while true; do aplay chan-id.wav ; done
>> Playing WAVE 'chan-id.wav' : Signed 16 bit Little Endian, Rate 44100 Hz,
>> Channels 6
>>
>>
>> aplay with 6 channel sample works but only front left / front right the
>> other "tracks" in the file are "silent".
>> Output of front left and front right are: front left all speakers to the
>> left. front left/rear left/center with output of channel "front right"
>> all speakers to the right "front right/rear right/subwoofer"
>
> So, it doesn't hang up, right? Then maybe the buffer/period setting
> influences on behavior of speaker-test...
>
>
>>>> ----------------------------
>>>> speaker-test in surround40
>>>>
>>>> front left=sound output rear left;
>>>> front right=sound output rear right;
>>>> rear right=sound output subwoofer
>>>> rear left=sound output center
>>> So the channels are shifted.
>>>
>>> When you play with 2-channel via "aplay foo.wav", do the samples come
>>> from front speakers?
>> aplay 10.wav
>> Playing WAVE 10.wav : Signed 16 bit Little Endian, Rate 44100 Hz, Stereo
>>
>> sound comes through all speakers, front left/front right/rear left/rear
>> right/center and subwoofer
>
> OK, that's default behavior of the driver. All left/right are spread
> to rear and CLFE.
>
>
>>> As you might have noticed in the kernel message, there is a workaround
>>> for AD1988A rev2 codec. You can disable it by re-defining
>>> AD1988A_REV2 in patch_analog.c to a bogus value, for example, a patch
>>> like below. Then try the tests again.
>>>
>>>
>>> Takashi
>>>
>>> diff -r ac7516b5dcb9 pci/hda/patch_analog.c
>>> --- a/pci/hda/patch_analog.c Thu Jun 29 13:22:29 2006 +0200
>>> +++ b/pci/hda/patch_analog.c Thu Jun 29 14:58:36 2006 +0200
>>> @@ -1543,7 +1543,8 @@ enum {
>>> };
>>>
>>> /* reivision id to check workarounds */
>>> -#define AD1988A_REV2 0x100200
>>> +// #define AD1988A_REV2 0x100200
>>> +#define AD1988A_REV2 0xabcd1234 /* bogus */
>>>
>>>
>>> /*
>> i have patched the file patch_analog.c recompiled and loaded the module.
>> same bad behaviour. Im sure that he has taken the new module because the
>> dmesg output is missing.
>>
>> ----
>>
>> have you any clues of what i could do? This stuff is a bit mysterious
>> for me. Why does he play a stereo wav file to all speakers. And why does
>> he plays only two channels of the surround file (chan-id.wav) and these
>> two channels getting splitted to every left speaker / every right speaker...
> (snip)
>> now the missing audio channel is there and it seems to me that this
>> movie is fully working in surround!
>> This bogus patch seems to work :)
>
> It disables the workaround for AD1988A rev2. According to AD, this
> codec revision has a h/w bug, so I implemented the workaround as they
> suggested.
>
> Could you attach the content of /proc/asound/card0/codec#* files?
> Is it really AD1988A, not AD1988B?
>
>
> Takashi
It is a AD1988B
small summary:
- out of the box 1.0.12_rc1 recognize my chip as a AD1988A rev.2 ->
seems to be wrong.
- with the "bogus patch" mplayer is working.
- Speaker-Test and aplay are "buggy" or not working as i would expect...
- hp jack does not mute the other speakers
- normal amarok output is a kind of too center/lfe centric (the winamp
output under windows has a much better sound)
- i miss a "rear" volume slider in kmix
cat /proc/asound/card0/codec#0
Codec: Analog Devices AD1988B
Address: 0
Vendor Id: 0x11d4198b
Subsystem Id: 0x104381f6
Revision Id: 0x100200
Default PCM: rates 0x7ff, bits 0x0e, types 0x1
Default Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Default Amp-Out caps: ofs=0x27, nsteps=0x27, stepsize=0x05, mute=0
Node 0x02 [Audio Output] wcaps 0x30311: Stereo Digital
PCM: rates 0x7e0, bits 0x0e, types 0x5
Connection: 1
0x1d
Node 0x03 [Audio Output] wcaps 0x405: Stereo Amp-Out
Amp-Out caps: ofs=0x27, nsteps=0x27, stepsize=0x05, mute=0
Amp-Out vals: [0x27 0x27]
Power: 0x0
Node 0x04 [Audio Output] wcaps 0x405: Stereo Amp-Out
Amp-Out caps: ofs=0x27, nsteps=0x27, stepsize=0x05, mute=0
Amp-Out vals: [0x24 0x24]
Power: 0x0
Node 0x05 [Audio Output] wcaps 0x405: Stereo Amp-Out
Amp-Out caps: ofs=0x27, nsteps=0x27, stepsize=0x05, mute=0
Amp-Out vals: [0x10 0x0c]
Power: 0x0
Node 0x06 [Audio Output] wcaps 0x405: Stereo Amp-Out
Amp-Out caps: ofs=0x27, nsteps=0x27, stepsize=0x05, mute=0
Amp-Out vals: [0x10 0x10]
Power: 0x0
Node 0x07 [Audio Input] wcaps 0x130391: Stereo Digital
PCM: rates 0x7e0, bits 0x0e, types 0x5
Connection: 1
0x1c
Node 0x08 [Audio Input] wcaps 0x100501: Stereo
Power: 0x0
Connection: 1
0x0c
Node 0x09 [Audio Input] wcaps 0x100501: Stereo
Power: 0x0
Connection: 1
0x0d
Node 0x0a [Audio Output] wcaps 0x405: Stereo Amp-Out
Amp-Out caps: ofs=0x27, nsteps=0x27, stepsize=0x05, mute=0
Amp-Out vals: [0x14 0x14]
Power: 0x0
Node 0x0b [Audio Selector] wcaps 0x300301: Stereo Digital
Connection: 3
0x08* 0x09 0x0f
Node 0x0c [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x27, nsteps=0x36, stepsize=0x05, mute=1
Amp-Out vals: [0xa7 0xa7]
Connection: 10
0x38 0x39* 0x3a 0x3b 0x3c 0x18 0x24 0x25 0x3d 0x20
Node 0x0d [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x27, nsteps=0x36, stepsize=0x05, mute=1
Amp-Out vals: [0xa7 0xa7]
Connection: 10
0x38 0x39* 0x3a 0x3b 0x3c 0x18 0x24 0x25 0x3d 0x20
Node 0x0e [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x27, nsteps=0x36, stepsize=0x05, mute=1
Amp-Out vals: [0xa7 0xa7]
Connection: 10
0x38 0x39* 0x3a 0x3b 0x3c 0x18 0x24 0x25 0x3d 0x20
Node 0x0f [Audio Input] wcaps 0x100501: Stereo
Power: 0x0
Connection: 1
0x0e
Node 0x10 [Beep Generator Widget] wcaps 0x70000c: Mono Amp-Out
Amp-Out caps: ofs=0x0f, nsteps=0x0f, stepsize=0x0b, mute=1
Amp-Out vals: [0x00]
Node 0x11 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x08373f: IN OUT HP Detect
Pin Default 0x02214130: [Jack] HP Out at Ext Front
Conn = 1/8, Color = Green
Pin-ctls: 0xc0: OUT HP
Connection: 1
0x22
Node 0x12 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x081373f: IN OUT HP EAPD Detect
Pin Default 0x01014010: [Jack] Line Out at Ext Rear
Conn = 1/8, Color = Green
Pin-ctls: 0x40: OUT
Connection: 1
0x29
Node 0x13 [Pin Complex] wcaps 0x40010c: Mono Amp-Out
Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x00]
Pincap 0x0810: OUT
Pin Default 0x511711f0: [N/A] Speaker at Int Rear
Conn = Analog, Color = Black
Pin-ctls: 0x40: OUT
Connection: 1
0x2d
Node 0x14 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x08373f: IN OUT HP Detect
Pin Default 0x02a19122: [Jack] Mic at Ext Front
Conn = 1/8, Color = Pink
Pin-ctls: 0x24: IN
Connection: 1
0x2b
Node 0x15 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x0813737: IN OUT EAPD Detect
Pin Default 0x01813021: [Jack] Line In at Ext Rear
Conn = 1/8, Color = Blue
Pin-ctls: 0x20: IN
Connection: 1
0x2c
Node 0x16 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x083737: IN OUT Detect
Pin Default 0x01011012: [Jack] Line Out at Ext Rear
Conn = 1/8, Color = Black
Pin-ctls: 0x40: OUT
Connection: 1
0x2a
Node 0x17 [Pin Complex] wcaps 0x40098d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x083737: IN OUT Detect
Pin Default 0x01a19020: [Jack] Mic at Ext Rear
Conn = 1/8, Color = Pink
Pin-ctls: 0x24: IN
Connection: 1
0x26
Node 0x18 [Pin Complex] wcaps 0x400001: Stereo
Pincap 0x0820: IN
Pin Default 0x9933112e: [Fixed] CD at Int ATAPI
Conn = ATAPI, Color = Black
Pin-ctls: 0x20: IN
Node 0x19 [Power Widget] wcaps 0x500500: Mono
Power: 0x0
Connection: 2
0x20* 0x21
Node 0x1a [Pin Complex] wcaps 0x400000: Mono
Pincap 0x0820: IN
Pin Default 0x99f301f0: [Fixed] Other at Int ATAPI
Conn = ATAPI, Color = Unknown
Pin-ctls: 0x20: IN
Node 0x1b [Pin Complex] wcaps 0x40030d: Stereo Digital Amp-Out
Amp-Out caps: ofs=0x27, nsteps=0x27, stepsize=0x05, mute=1
Amp-Out vals: [0x27 0x27]
Pincap 0x0810: OUT
Pin Default 0x0145f1f0: [Jack] SPDIF Out at Ext Rear
Conn = Optical, Color = Other
Pin-ctls: 0x40: OUT
Connection: 1
0x02
Node 0x1c [Pin Complex] wcaps 0x40020b: Stereo Digital Amp-In
Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-In vals:
Pincap 0x0820: IN
Pin Default 0x41c5f1f0: [N/A] SPDIF In at Ext Rear
Conn = Optical, Color = Other
Pin-ctls: 0x20: IN
Node 0x1d [Audio Mixer] wcaps 0x200303: Stereo Digital Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00 0x00] [0x00 0x00]
Connection: 2
0x01 0x0b
Node 0x1e [Audio Mixer] wcaps 0x200103: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x80 0x80] [0x80 0x80]
Connection: 2
0x36 0x21
Node 0x1f [Volume Knob Widget] wcaps 0x600080: Mono
Node 0x20 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-In vals: [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80
0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
Connection: 8
0x39 0x33 0x38 0x3d 0x34 0x3b 0x18 0x1a
Node 0x21 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x9f 0x9f]
Connection: 1
0x20
Node 0x22 [Audio Mixer] wcaps 0x200103: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x80 0x80] [0x80 0x80]
Connection: 2
0x37 0x21
Node 0x23 [Vendor Defined Widget] wcaps 0xf00100: Mono
Connection: 18
0x11* 0x12 0x13 0x14 0x15 0x16 0x17 0x18 0x24 0x25 0x38 0x39 0x3a
0x3b 0x3c 0x3d 0x20 0x21
Node 0x24 [Pin Complex] wcaps 0x40098d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x0837: IN OUT Detect
Pin Default 0x01016011: [Jack] Line Out at Ext Rear
Conn = 1/8, Color = Orange
Pin-ctls: 0x40: OUT
Connection: 1
0x27
Node 0x25 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x0837: IN OUT Detect
Pin Default 0x01012013: [Jack] Line Out at Ext Rear
Conn = 1/8, Color = Grey
Pin-ctls: 0x40: OUT
Connection: 1
0x28
Node 0x26 [Audio Mixer] wcaps 0x200103: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x80 0x80] [0x80 0x80]
Connection: 2
0x32 0x21
Node 0x27 [Audio Mixer] wcaps 0x200103: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00 0x00] [0x00 0x00]
Connection: 2
0x05 0x21
Node 0x28 [Audio Mixer] wcaps 0x200103: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00 0x00] [0x00 0x00]
Connection: 2
0x0a 0x21
Node 0x29 [Audio Mixer] wcaps 0x200103: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00 0x00] [0x00 0x00]
Connection: 2
0x04 0x21
Node 0x2a [Audio Mixer] wcaps 0x200103: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00 0x00] [0x00 0x00]
Connection: 2
0x06 0x21
Node 0x2b [Audio Mixer] wcaps 0x200103: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x80 0x80] [0x80 0x80]
Connection: 2
0x30 0x21
Node 0x2c [Audio Mixer] wcaps 0x200103: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x80 0x80] [0x80 0x80]
Connection: 2
0x31 0x21
Node 0x2d [Audio Mixer] wcaps 0x200100: Mono
Connection: 1
0x1e
Node 0x2e [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x2f [Vendor Defined Widget] wcaps 0xf00100: Mono
Connection: 6
0x11* 0x12 0x14 0x15 0x16 0x17
Node 0x30 [Audio Selector] wcaps 0x300101: Stereo
Connection: 3
0x03* 0x04 0x06
Node 0x31 [Audio Selector] wcaps 0x300101: Stereo
Connection: 2
0x04* 0x0a
Node 0x32 [Audio Selector] wcaps 0x300101: Stereo
Connection: 2
0x05* 0x04
Node 0x33 [Audio Selector] wcaps 0x300101: Stereo
Connection: 3
0x3a* 0x25 0x24
Node 0x34 [Audio Selector] wcaps 0x300101: Stereo
Connection: 3
0x3c* 0x25 0x24
Node 0x35 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x36 [Audio Selector] wcaps 0x300101: Stereo
Connection: 3
0x03 0x04* 0x06
Node 0x37 [Audio Selector] wcaps 0x300101: Stereo
Connection: 3
0x03 0x04* 0x06
Node 0x38 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-Out vals: [0x00 0x00]
Connection: 1
0x11
Node 0x39 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-Out vals: [0x00 0x00]
Connection: 1
0x14
Node 0x3a [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-Out vals: [0x00 0x00]
Connection: 1
0x15
Node 0x3b [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-Out vals: [0x00 0x00]
Connection: 1
0x16
Node 0x3c [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-Out vals: [0x00 0x00]
Connection: 1
0x17
Node 0x3d [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
Amp-Out vals: [0x00 0x00]
Connection: 1
0x12
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________
Alsa-devel mailing list
Alsa-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.sourceforge.net/lists/listinfo/alsa-devel
