At Wed, 21 Jun 2006 21:17:16 +0200, mw-u2@xxxxxx wrote: > > Hi, > > > If the default configuration doesn't work and one of the above > > matches with your device, report it together with the PCI > > subsystem ID (output of "lspci -nv") to ALSA BTS or alsa-devel > > ML (see the section "Links and Addresses"). > > I had to use options snd-hda-intel model=6stack position_fix=1 index=0 > > $ lspci > 0000:00:14.2 0403: ATI Technologies Inc: Unknown device 437b (rev 01) > > $ lspci -nv > > 0000:00:14.2 0403: 1002:437b (rev 01) > Subsystem: 1462:7173 > Flags: bus master, slow devsel, latency 64, IRQ 201 > Memory at febf8000 (64-bit, non-prefetchable) [size=16K] > Capabilities: [50] Power Management version 2 > Capabilities: [60] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable- > > Hope that helps! > > I still got a very annoying problem left though: I cant change the > volume using the PCM channel I have to change the volume of Front > channel. This is very annoying since all programs with a volume > control change the PCM channel which is of no effect. Hm, this implies that model=6stack doesn't match with your devices well enough. Also, position_fix=1 shouldn't be necessary in the latest version. Doesn't the driver work without this option? Provide /proc/asound/card0/codec#* files and /etc/asound.state for further analysis. Takashi All the advantages of Linux Managed Hosting--Without the Cost and Risk! Fully trained technicians. The highest number of Red Hat certifications in the hosting industry. Fanatical Support. Click to learn more http://sel.as-us.falkag.net/sel?cmd=lnk&kid=107521&bid=248729&dat=121642 _______________________________________________ Alsa-devel mailing list Alsa-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.sourceforge.net/lists/listinfo/alsa-devel
