I was able to achieve what I wanted to do by the /etc/network/interfaces
file posted below on the host. KVM/QEMU does not accept the bridge
notation with dots in it, such as bridge0.20. Instead, one needs to
create a separate vlan definition and a bridge on top of that vlan. This
would create an access port for the VMs that use that bridge. What I was
trying to do was to create a trunk port on a bridge, and by the static
IP chosen for VMs, let each VM claim their VLANs. In this working
version, the access ports claim the VLAN that the VM would belong to
instead. I hope that this would help people avoid the suffering I
endured during the last week to achieve this, lol!
[code]
auto lo
iface lo inet loopback
# bond interface
auto bond0
iface bond0 inet manual
bond-slaves enp5s0 enp6s0
bond-mode 802.3ad
bond-xmit-hash-policy layer2+3
bond-miimon 100
bond-lacp-rate 1
# vlan 20
auto vlan20
iface vlan20 inet manual
vlan-id 20
vlan-raw-device bridge0
auto bridge20
iface bridge20 inet manual
bridge-ports vlan20
# bridge interface
auto bridge0
iface bridge0 inet manual
bridge-ports bond0
bridge_stp on
bridge_fd 2
bridge_maxwait 0
bridge-vlan-aware yes
bridge-vids 1-500
auto bridge0.1
iface bridge0.1 inet static
address 192.168.1.130/24
gateway 192.168.1.1
[/code]
_______________________________________________
Users mailing list -- users@xxxxxxxxxxxxxxxxx
To unsubscribe send an email to users-leave@xxxxxxxxxxxxxxxxx
