Hello all, I’m currently trying to figure out how to forward ports to guests that are on a NAT Network. I have followed the directions on https://wiki.libvirt.org/page/Networking under the “Forwarding Incoming Connections” Section and get connection refused when attempting to connect. System: Ubuntu Server 18.04.1 Virsh / LibVirtd Version: 4.0.0 Here’s the contents of /etc/libvirt/hooks/qemu #!/bin/bash # IMPORTANT: Change the "VM NAME" string to match your actual VM Name. # In order to create rules to other VMs, just duplicate the below block and configure # it accordingly. if [ "${1}" = "testy" ]; then # Update the following variables to fit your setup GUEST_IP='10.128.10.100' GUEST_PORT='22' HOST_PORT='2588' if [ "${2}" = "stopped" ] || [ "${2}" = "reconnect" ]; then /sbin/iptables -D FORWARD -o virbr0 -d $GUEST_IP -j ACCEPT /sbin/iptables -t nat -D PREROUTING -p tcp --dport $HOST_PORT -j DNAT --to $GUEST_IP:$GUEST_PORT fi if [ "${2}" = "start" ] || [ "${2}" = "reconnect" ]; then /sbin/iptables -I FORWARD -o virbr0 -d $GUEST_IP -j ACCEPT /sbin/iptables -t nat -I PREROUTING -p tcp --dport $HOST_PORT -j DNAT --to $GUEST_IP:$GUEST_PORT fi fi Here’s my network XML <network> <name>olympus</name> <uuid>3b0d968c-8166-42f7-8109-e5f0317cab42</uuid> <forward mode='nat'> <nat> <port start='1024' end='65535'/> </nat> </forward> <bridge name='virbr1' stp='on' delay='0'/> <mac address='52:54:00:bb:18:6b'/> <ip address='10.128.10.1' netmask='255.255.255.0'> <dhcp> <range start='10.128.10.2' end='10.128.10.254'/> <host mac='52:54:00:8d:f5:0c' name='testy' ip='10.128.10.100'/> </dhcp> </ip> </network> And here’s the results of iptables -L -vt nat: BEFORE VM BOOT: Chain PREROUTING (policy ACCEPT 46615 packets, 6618K bytes) pkts bytes target prot opt in out source destination Chain INPUT (policy ACCEPT 46615 packets, 6618K bytes) pkts bytes target prot opt in out source destination Chain OUTPUT (policy ACCEPT 198K packets, 18M bytes) pkts bytes target prot opt in out source destination Chain POSTROUTING (policy ACCEPT 198K packets, 18M bytes) pkts bytes target prot opt in out source destination 24 1812 RETURN all -- any any 10.128.10.0/24 base-address.mcast.net/24 0 0 RETURN all -- any any 10.128.10.0/24 255.255.255.255 17 1020 MASQUERADE tcp -- any any 10.128.10.0/24 !10.128.10.0/24 masq ports: 1024-65535 15 1700 MASQUERADE udp -- any any 10.128.10.0/24 !10.128.10.0/24 masq ports: 1024-65535 0 0 MASQUERADE all -- any any 10.128.10.0/24 !10.128.10.0/24 22 1666 RETURN all -- any any 192.168.122.0/24 base-address.mcast.net/24 0 0 RETURN all -- any any 192.168.122.0/24 255.255.255.255 0 0 MASQUERADE tcp -- any any 192.168.122.0/24 !192.168.122.0/24 masq ports: 1024-65535 8 1168 MASQUERADE udp -- any any 192.168.122.0/24 !192.168.122.0/24 masq ports: 1024-65535 0 0 MASQUERADE all -- any any 192.168.122.0/24 !192.168.122.0/24 AFTER VM BOOT Chain PREROUTING (policy ACCEPT 2 packets, 120 bytes) pkts bytes target prot opt in out source destination 0 0 DNAT tcp -- any any anywhere anywhere tcp dpt:2588 to:10.128.10.100:22 Chain INPUT (policy ACCEPT 2 packets, 120 bytes) pkts bytes target prot opt in out source destination Chain OUTPUT (policy ACCEPT 18 packets, 1263 bytes) pkts bytes target prot opt in out source destination Chain POSTROUTING (policy ACCEPT 18 packets, 1263 bytes) pkts bytes target prot opt in out source destination 24 1812 RETURN all -- any any 10.128.10.0/24 base-address.mcast.net/24 0 0 RETURN all -- any any 10.128.10.0/24 255.255.255.255 17 1020 MASQUERADE tcp -- any any 10.128.10.0/24 !10.128.10.0/24 masq ports: 1024-65535 15 1700 MASQUERADE udp -- any any 10.128.10.0/24 !10.128.10.0/24 masq ports: 1024-65535 0 0 MASQUERADE all -- any any 10.128.10.0/24 !10.128.10.0/24 22 1666 RETURN all -- any any 192.168.122.0/24 base-address.mcast.net/24 0 0 RETURN all -- any any 192.168.122.0/24 255.255.255.255 0 0 MASQUERADE tcp -- any any 192.168.122.0/24 !192.168.122.0/24 masq ports: 1024-65535 8 1168 MASQUERADE udp -- any any 192.168.122.0/24 !192.168.122.0/24 masq ports: 1024-65535 0 0 MASQUERADE all -- any any 192.168.122.0/24 !192.168.122.0/24 And lastly heres what actually happens on attempt to SSH: rhys@odin:~$ ssh rhys@172.16.99.170 -p 2258 ssh: connect to host 172.16.99.170 port 2258: Connection refused rhys@odin:~$ The connection refused is instant, not a timeout. I’ve ensured that ufw is disabled. Any help appreciated. I just can’t figure this out. Sent from Mail for Windows 10 |
_______________________________________________ libvirt-users mailing list libvirt-users@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/libvirt-users
