Hi all. I re-installed my KVM server with Debian stable again (squeeze) and it works again (libvirt-bin 0.8.3-5+squeeze5). I'll fill a bug with Debian, because maybe libvirt-bin 0.9.12-11 has some kind of bug. PD: I'm using RAID 1 software Regards. Javier 2013/3/17 Javi Legido <javi@xxxxxxxxxx>: > Hi all. > > I was using libvirt under Debian squeeze (I guess it was > 0.8.3-5+squeeze4 or something similar). I was able to clone machines > with below command: > > sudo virt-clone --connect=qemu:///system -o template -n > template_clone -f /var/lib/libvirt/images/template_clone.qcow2 > > After that I was able to start the VM and connect to the console: > > sudo virsh console template_clone > > I recently Installed libvirt on a Debian wheezy ( libvirt-bin > 0.9.12-11). I recuperated the old "template" VM, and I tried to create > a new one successfully. > > What I CAN do: > > 1. Start both VM's (the template imported from the old installation > and the new one) > 2. Connect to the console of both VM's > 3. Clone them > > What I CAN'T do: > > 1. Access to the console of the cloned VM, they stalled at the prompt. > > Just in case config of the VM: > > <domain type='kvm'> > <name>template-1.dev.jj.com</name> > <uuid>f75dcbdc-8fc9-b50c-6612-c34dfebea16f</uuid> > <memory unit='KiB'>1048576</memory> > <currentMemory unit='KiB'>524288</currentMemory> > <vcpu placement='static'>2</vcpu> > <os> > <type arch='x86_64' machine='pc-1.1'>hvm</type> > <boot dev='hd'/> > </os> > <features> > <acpi/> > <apic/> > <pae/> > </features> > <clock offset='utc'/> > <on_poweroff>destroy</on_poweroff> > <on_reboot>restart</on_reboot> > <on_crash>restart</on_crash> > <devices> > <emulator>/usr/bin/kvm</emulator> > <disk type='file' device='disk'> > <driver name='qemu' type='qcow2' cache='none'/> > <source file='/var/lib/libvirt/images/template-1.dev.jj.com.qcow2'/> > <target dev='vda' bus='virtio'/> > <address type='pci' domain='0x0000' bus='0x00' slot='0x04' > function='0x0'/> > </disk> > <controller type='usb' index='0'> > <address type='pci' domain='0x0000' bus='0x00' slot='0x01' > function='0x2'/> > </controller> > <interface type='network'> > <mac address='52:54:00:c0:c6:24'/> > <source network='default'/> > <model type='virtio'/> > <address type='pci' domain='0x0000' bus='0x00' slot='0x03' > function='0x0'/> > </interface> > <serial type='pty'> > <target port='0'/> > </serial> > <console type='pty'> > <target type='serial' port='0'/> > </console> > <memballoon model='virtio'> > <address type='pci' domain='0x0000' bus='0x00' slot='0x05' > function='0x0'/> > </memballoon> > </devices> > </domain> > > Is somebody else experiencing the same problem? I'm not sure even that > the clones VM is working, since I'm able to start it up but no connect > to it. > > Thanks. > > Javier _______________________________________________ libvirt-users mailing list libvirt-users@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/libvirt-users
