https://bugzilla.redhat.com/show_bug.cgi?id=648855 mentioned a misuse of 'an' where 'a' is proper; that has since been fixed, but a search found other problems (some were a spelling error for 'and', while most were fixed by 'a'). * daemon/stream.c: Fix grammar. * src/conf/domain_conf.c: Likewise. * src/conf/domain_event.c: Likewise. * src/esx/esx_driver.c: Likewise. * src/esx/esx_vi.c: Likewise. * src/rpc/virnetclient.c: Likewise. * src/rpc/virnetserverprogram.c: Likewise. * src/storage/storage_backend_fs.c: Likewise. * src/util/conf.c: Likewise. * src/util/dnsmasq.c: Likewise. * src/util/iptables.c: Likewise. * src/xen/xen_hypervisor.c: Likewise. * src/xen/xend_internal.c: Likewise. * src/xen/xs_internal.c: Likewise. * tools/virsh.c: Likewise. --- Pushing under the trivial rule. daemon/stream.c | 4 ++-- src/conf/domain_conf.c | 2 +- src/conf/domain_event.c | 2 +- src/esx/esx_driver.c | 2 +- src/esx/esx_vi.c | 2 +- src/rpc/virnetclient.c | 2 +- src/rpc/virnetserverprogram.c | 2 +- src/storage/storage_backend_fs.c | 2 +- src/util/conf.c | 6 +++--- src/util/dnsmasq.c | 4 ++-- src/util/iptables.c | 4 ++-- src/xen/xen_hypervisor.c | 32 ++++++++++++++++---------------- src/xen/xend_internal.c | 2 +- src/xen/xs_internal.c | 2 +- tools/virsh.c | 2 +- 15 files changed, 35 insertions(+), 35 deletions(-) diff --git a/daemon/stream.c b/daemon/stream.c index 50f8fd4..bb66f75 100644 --- a/daemon/stream.c +++ b/daemon/stream.c @@ -1,7 +1,7 @@ /* * stream.c: APIs for managing client streams * - * Copyright (C) 2009 Red Hat, Inc. + * Copyright (C) 2009, 2011 Red Hat, Inc. * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public @@ -556,7 +556,7 @@ daemonStreamHandleWriteData(virNetServerClientPtr client, /* - * Process an finish handshake from the client. + * Process a finish handshake from the client. * * Returns a VIR_NET_OK confirmation if successful, or a VIR_NET_ERROR * if there was a stream error diff --git a/src/conf/domain_conf.c b/src/conf/domain_conf.c index 75f21dc..75e51a0 100644 --- a/src/conf/domain_conf.c +++ b/src/conf/domain_conf.c @@ -4555,7 +4555,7 @@ error: } -/* Parse the XML definition for an hub device */ +/* Parse the XML definition for a hub device */ static virDomainHubDefPtr virDomainHubDefParseXML(xmlNodePtr node, unsigned int flags) { diff --git a/src/conf/domain_event.c b/src/conf/domain_event.c index a04b9d0..614ab97 100644 --- a/src/conf/domain_event.c +++ b/src/conf/domain_event.c @@ -1070,7 +1070,7 @@ virDomainEventQueuePop(virDomainEventQueuePtr evtQueue) * @evtQueue: the dom event queue * @event: the event to add * - * Internal function to push onto the back of an virDomainEventQueue + * Internal function to push onto the back of a virDomainEventQueue * * Returns: 0 on success, -1 on failure */ diff --git a/src/esx/esx_driver.c b/src/esx/esx_driver.c index f8b3c7a..1e424eb 100644 --- a/src/esx/esx_driver.c +++ b/src/esx/esx_driver.c @@ -267,7 +267,7 @@ esxParseVMXFileName(const char *fileName, void *opaque) /* - * This function does the inverse of esxParseVMXFileName. It takes an file name + * This function does the inverse of esxParseVMXFileName. It takes a file name * in datastore path format or in absolute format and converts it to a file * name that can be used in a .vmx file. * diff --git a/src/esx/esx_vi.c b/src/esx/esx_vi.c index 80f337b..99f25f8 100644 --- a/src/esx/esx_vi.c +++ b/src/esx/esx_vi.c @@ -1800,7 +1800,7 @@ esxVI_EnsureSession(esxVI_Context *ctx) if (ctx->hasSessionIsActive) { /* * Use SessionIsActive to check if there is an active session for this - * connection an re-login in there isn't. + * connection and re-login in there isn't. */ if (esxVI_SessionIsActive(ctx, ctx->session->key, ctx->session->userName, &active) < 0) { diff --git a/src/rpc/virnetclient.c b/src/rpc/virnetclient.c index ec06f45..7f9a332 100644 --- a/src/rpc/virnetclient.c +++ b/src/rpc/virnetclient.c @@ -1701,7 +1701,7 @@ static int virNetClientSendInternal(virNetClientPtr client, if (expectReply && nonBlock) { virNetError(VIR_ERR_INTERNAL_ERROR, "%s", - _("Attempt to send an non-blocking message with a synchronous reply")); + _("Attempt to send a non-blocking message with a synchronous reply")); return -1; } diff --git a/src/rpc/virnetserverprogram.c b/src/rpc/virnetserverprogram.c index bbd2d65..d2ede6b 100644 --- a/src/rpc/virnetserverprogram.c +++ b/src/rpc/virnetserverprogram.c @@ -340,7 +340,7 @@ cleanup: * @client: the unlocked client object * @msg: the complete incoming method call, with header already decoded * - * This method is used to dispatch an message representing an + * This method is used to dispatch a message representing an * incoming method call from a client. It decodes the payload * to obtain method call arguments, invokves the method and * then sends a reply packet with the return values diff --git a/src/storage/storage_backend_fs.c b/src/storage/storage_backend_fs.c index b5acd20..d8dc29c 100644 --- a/src/storage/storage_backend_fs.c +++ b/src/storage/storage_backend_fs.c @@ -880,7 +880,7 @@ virStorageBackendFileSystemRefresh(virConnectPtr conn ATTRIBUTE_UNUSED, VIR_STORAGE_VOL_OPEN_DEFAULT) < 0) { /* The backing file is currently unavailable, the capacity, * allocation, owner, group and mode are unknown. Just log the - * error an continue. + * error and continue. * Unfortunately virStorageBackendProbeTarget() might already * have logged a similar message for the same problem, but only * if AUTO format detection was used. */ diff --git a/src/util/conf.c b/src/util/conf.c index c8dcc7f..502dafb 100644 --- a/src/util/conf.c +++ b/src/util/conf.c @@ -698,7 +698,7 @@ virConfParseStatement(virConfParserCtxtPtr ctxt) * Parse the subset of the Python language needed to handle simple * Xen configuration files. * - * Returns an handle to lookup settings or NULL if it failed to + * Returns a handle to lookup settings or NULL if it failed to * read or parse the file, use virConfFree() to free the data. */ static virConfPtr @@ -745,7 +745,7 @@ error: * * Reads a configuration file. * - * Returns an handle to lookup settings or NULL if it failed to + * Returns a handle to lookup settings or NULL if it failed to * read or parse the file, use virConfFree() to free the data. */ virConfPtr @@ -780,7 +780,7 @@ virConfReadFile(const char *filename, unsigned int flags) * Reads a configuration file loaded in memory. The string can be * zero terminated in which case @len can be 0 * - * Returns an handle to lookup settings or NULL if it failed to + * Returns a handle to lookup settings or NULL if it failed to * parse the content, use virConfFree() to free the data. */ virConfPtr diff --git a/src/util/dnsmasq.c b/src/util/dnsmasq.c index b5f90a6..dcb7195 100644 --- a/src/util/dnsmasq.c +++ b/src/util/dnsmasq.c @@ -1,5 +1,5 @@ /* - * Copyright (C) 2007-2010 Red Hat, Inc. + * Copyright (C) 2007-2011 Red Hat, Inc. * Copyright (C) 2010 Satoru SATOH <satoru.satoh@xxxxxxxxx> * * This library is free software; you can redistribute it and/or @@ -461,7 +461,7 @@ dnsmasqContextNew(const char *network_name, * dnsmasqContextFree: * @ctx: pointer to the dnsmasq context * - * Free the resources associated with an dnsmasq context + * Free the resources associated with a dnsmasq context */ void dnsmasqContextFree(dnsmasqContext *ctx) diff --git a/src/util/iptables.c b/src/util/iptables.c index 452d717..3023900 100644 --- a/src/util/iptables.c +++ b/src/util/iptables.c @@ -1,5 +1,5 @@ /* - * Copyright (C) 2007-2010 Red Hat, Inc. + * Copyright (C) 2007-2011 Red Hat, Inc. * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public @@ -891,7 +891,7 @@ iptablesOutputFixUdpChecksum(iptablesContext *ctx, * @iface: the interface name * @port: the UDP port to match * - * Add an rule to the mangle table's POSTROUTING chain that fixes up the + * Add a rule to the mangle table's POSTROUTING chain that fixes up the * checksum of packets with the given destination @port. * the given @iface interface for TCP packets. * diff --git a/src/xen/xen_hypervisor.c b/src/xen/xen_hypervisor.c index 6c71b65..941686f 100644 --- a/src/xen/xen_hypervisor.c +++ b/src/xen/xen_hypervisor.c @@ -556,7 +556,7 @@ typedef struct xen_v0_domainop xen_v0_domainop; #define XEN_V2_OP_UNPAUSEDOMAIN 4 /* - * The information for an setmaxmem system hypercall + * The information for a setmaxmem system hypercall */ #define XEN_V0_OP_SETMAXMEM 28 #define XEN_V1_OP_SETMAXMEM 28 @@ -580,7 +580,7 @@ struct xen_v2d5_setmaxmem { typedef struct xen_v2d5_setmaxmem xen_v2d5_setmaxmem; /* - * The information for an setmaxvcpu system hypercall + * The information for a setmaxvcpu system hypercall */ #define XEN_V0_OP_SETMAXVCPU 41 #define XEN_V1_OP_SETMAXVCPU 41 @@ -599,7 +599,7 @@ struct xen_v2_setmaxvcpu { typedef struct xen_v2_setmaxvcpu xen_v2_setmaxvcpu; /* - * The information for an setvcpumap system hypercall + * The information for a setvcpumap system hypercall * Note that between 1 and 2 the limitation to 64 physical CPU was lifted * hence the difference in structures */ @@ -647,7 +647,7 @@ struct xen_v2d5_setvcpumap { typedef struct xen_v2d5_setvcpumap xen_v2d5_setvcpumap; /* - * The information for an vcpuinfo system hypercall + * The information for a vcpuinfo system hypercall */ #define XEN_V0_OP_GETVCPUINFO 43 #define XEN_V1_OP_GETVCPUINFO 43 @@ -866,8 +866,8 @@ virXenErrorFunc(virErrorNumber error, const char *func, const char *info, * @handle: the handle to the Xen hypervisor * @op: pointer to the hypervisor operation structure * - * Do an hypervisor operation though the old interface, - * this leads to an hypervisor call through ioctl. + * Do a hypervisor operation though the old interface, + * this leads to a hypervisor call through ioctl. * * Returns 0 in case of success and -1 in case of error. */ @@ -908,7 +908,7 @@ xenHypervisorDoV0Op(int handle, xen_op_v0 * op) * @handle: the handle to the Xen hypervisor * @op: pointer to the hypervisor operation structure * - * Do an hypervisor v1 operation, this leads to an hypervisor call through + * Do a hypervisor v1 operation, this leads to a hypervisor call through * ioctl. * * Returns 0 in case of success and -1 in case of error. @@ -951,7 +951,7 @@ xenHypervisorDoV1Op(int handle, xen_op_v1* op) * @handle: the handle to the Xen hypervisor * @op: pointer to the hypervisor operation structure * - * Do an hypervisor v2 system operation, this leads to an hypervisor + * Do a hypervisor v2 system operation, this leads to a hypervisor * call through ioctl. * * Returns 0 in case of success and -1 in case of error. @@ -994,7 +994,7 @@ xenHypervisorDoV2Sys(int handle, xen_op_v2_sys* op) * @handle: the handle to the Xen hypervisor * @op: pointer to the hypervisor domain operation structure * - * Do an hypervisor v2 domain operation, this leads to an hypervisor + * Do a hypervisor v2 domain operation, this leads to a hypervisor * call through ioctl. * * Returns 0 in case of success and -1 in case of error. @@ -3155,7 +3155,7 @@ xenHypervisorGetMaxMemory(virDomainPtr domain) * @id: the domain ID * @info: the place where information should be stored * - * Do an hypervisor call to get the related set of domain information. + * Do a hypervisor call to get the related set of domain information. * * Returns 0 in case of success, -1 in case of error. */ @@ -3238,7 +3238,7 @@ xenHypervisorGetDomInfo(virConnectPtr conn, int id, virDomainInfoPtr info) * @domain: pointer to the domain block * @info: the place where information should be stored * - * Do an hypervisor call to get the related set of domain information. + * Do a hypervisor call to get the related set of domain information. * * Returns 0 in case of success, -1 in case of error. */ @@ -3382,7 +3382,7 @@ xenHypervisorNodeGetCellsFreeMemory(virConnectPtr conn, unsigned long long *free * xenHypervisorPauseDomain: * @domain: pointer to the domain block * - * Do an hypervisor call to pause the given domain + * Do a hypervisor call to pause the given domain * * Returns 0 in case of success, -1 in case of error. */ @@ -3409,7 +3409,7 @@ xenHypervisorPauseDomain(virDomainPtr domain) * xenHypervisorResumeDomain: * @domain: pointer to the domain block * - * Do an hypervisor call to resume the given domain + * Do a hypervisor call to resume the given domain * * Returns 0 in case of success, -1 in case of error. */ @@ -3437,7 +3437,7 @@ xenHypervisorResumeDomain(virDomainPtr domain) * @domain: pointer to the domain block * @flags: an OR'ed set of virDomainDestroyFlagsValues * - * Do an hypervisor call to destroy the given domain + * Do a hypervisor call to destroy the given domain * * Calling this function with no @flags set (equal to zero) * is equivalent to calling xenHypervisorDestroyDomain. @@ -3471,7 +3471,7 @@ xenHypervisorDestroyDomainFlags(virDomainPtr domain, * @domain: pointer to the domain block * @memory: the max memory size in kilobytes. * - * Do an hypervisor call to change the maximum amount of memory used + * Do a hypervisor call to change the maximum amount of memory used * * Returns 0 in case of success, -1 in case of error. */ @@ -3563,7 +3563,7 @@ xenHypervisorPinVcpu(virDomainPtr domain, unsigned int vcpu, * @domain: pointer to domain object, or NULL for Domain0 * @info: pointer to an array of virVcpuInfo structures (OUT) * @maxinfo: number of structures in info array - * @cpumaps: pointer to an bit map of real CPUs for all vcpus of this domain (in 8-bit bytes) (OUT) + * @cpumaps: pointer to a bit map of real CPUs for all vcpus of this domain (in 8-bit bytes) (OUT) * If cpumaps is NULL, then no cpumap information is returned by the API. * It's assumed there is <maxinfo> cpumap in cpumaps array. * The memory allocated to cpumaps must be (maxinfo * maplen) bytes diff --git a/src/xen/xend_internal.c b/src/xen/xend_internal.c index 16165fe..0c0b6cb 100644 --- a/src/xen/xend_internal.c +++ b/src/xen/xend_internal.c @@ -2369,7 +2369,7 @@ xenDaemonDomainGetVcpusFlags(virDomainPtr domain, unsigned int flags) * @domain: pointer to domain object, or NULL for Domain0 * @info: pointer to an array of virVcpuInfo structures (OUT) * @maxinfo: number of structures in info array - * @cpumaps: pointer to an bit map of real CPUs for all vcpus of this domain (in 8-bit bytes) (OUT) + * @cpumaps: pointer to a bit map of real CPUs for all vcpus of this domain (in 8-bit bytes) (OUT) * If cpumaps is NULL, then no cpumap information is returned by the API. * It's assumed there is <maxinfo> cpumap in cpumaps array. * The memory allocated to cpumaps must be (maxinfo * maplen) bytes diff --git a/src/xen/xs_internal.c b/src/xen/xs_internal.c index 21018fd..a28e6cc 100644 --- a/src/xen/xs_internal.c +++ b/src/xen/xs_internal.c @@ -355,7 +355,7 @@ xenStoreClose(virConnectPtr conn) * @domain: pointer to the domain block * @info: the place where information should be stored * - * Do an hypervisor call to get the related set of domain information. + * Do a hypervisor call to get the related set of domain information. * * Returns 0 in case of success, -1 in case of error. */ diff --git a/tools/virsh.c b/tools/virsh.c index be4df58..d02be5c 100644 --- a/tools/virsh.c +++ b/tools/virsh.c @@ -13233,7 +13233,7 @@ cmdCPUBaseline(vshControl *ctl, const vshCmd *cmd) if (virFileReadAll(from, VIRSH_MAX_XML_FILE, &buffer) < 0) return false; - /* add an separate container around the xml */ + /* add a separate container around the xml */ virBufferStrcat(&buf, "<container>", buffer, "</container>", NULL); if (virBufferError(&buf)) goto no_memory; -- 1.7.7.3 -- libvir-list mailing list libvir-list@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/libvir-list