Well i described how to build your own initrd.img (on bootnet.img but should work also with boot.img because its only the modules part you replace on the initrd.img) some days ago how to do it on this mailinglist: http://www.redhat.com/mailing-lists/kickstart-list/msg02393.html Maybe you should take a look on the thread. I havent tried it with a e1000 yet but if you follow the howto it will probably work. I am pretty sure. oj On Mon, 15 Jul 2002, Jay Christopherson wrote: > I have been trying to kickstart a Delll Poweredge 1650 w/ 7.2. Dell has > seen fit to only include the Intel Pro 1000 GNIC's onboard. Unfortunately, > neither 7.2 (nor 7.3) boot disks come with the e1000 driver in the > initrd.img. > > I have added the module from the base install (no good, Dell reports that > the redhat provided driver is not compatible), the Dell recommended driver > (no good, gets unresolved symbols), and the Intel provided driver (no good, > unresolved symbols). I have built these modules on a plain vanilla 7.2 > system and successfully installed the modules by hand, so I know the modules > are good. I just don't know why the insmod is failing during the kickstart > process. > > Has anyone had any luck (or even tried) kickstarting a server with Pro 1000 > interface cards? > > - Jay > > > > _______________________________________________ > Kickstart-list mailing list > Kickstart-list@xxxxxxxxxx > https://listman.redhat.com/mailman/listinfo/kickstart-list >
