Jay, I have actually kickstarted 2 compaq's with the Intel Pro 1000 with 100% success. One I used Compaq's custom image that you can download off of their site, but it will fill the disk. The other I created a custom image and used that. If you go to compaq's site search on the dl360 and then look for the linux driver support. Scott On Mon, 2002-07-15 at 17:09, Jay Christopherson wrote: > I have been trying to kickstart a Delll Poweredge 1650 w/ 7.2. Dell has > seen fit to only include the Intel Pro 1000 GNIC's onboard. Unfortunately, > neither 7.2 (nor 7.3) boot disks come with the e1000 driver in the > initrd.img. > > I have added the module from the base install (no good, Dell reports that > the redhat provided driver is not compatible), the Dell recommended driver > (no good, gets unresolved symbols), and the Intel provided driver (no good, > unresolved symbols). I have built these modules on a plain vanilla 7.2 > system and successfully installed the modules by hand, so I know the modules > are good. I just don't know why the insmod is failing during the kickstart > process. > > Has anyone had any luck (or even tried) kickstarting a server with Pro 1000 > interface cards? > > - Jay > > > > _______________________________________________ > Kickstart-list mailing list > Kickstart-list@xxxxxxxxxx > https://listman.redhat.com/mailman/listinfo/kickstart-list
