On 03/21/17 19:54, Tom H wrote: > Maybe it would've been clearer if the outputs of lvm and mdadm had > been included, but it's clear that: > > - there are two mdadm raid1s of 1G and 34G, > > - /boot is the 1G raidvol, > > - /, /var, /home, and swap are LVs on the 34G raidvol. OK, fair enough. You saw some of the output from lvm commands in another message. [root@2disk proc]# mdadm -Q /dev/sda1 /dev/sda1: is not an md array /dev/sda1: device 0 in 2 device active raid1 /dev/md/boot. Use mdadm --examine for more detail. [root@2disk proc]# mdadm -Q /dev/sda2 /dev/sda2: is not an md array /dev/sda2: device 0 in 2 device active raid1 /dev/md/pv00. Use mdadm --examine for more detail. [root@2disk proc]# mdadm -Q /dev/sdb1 /dev/sdb1: is not an md array /dev/sdb1: device 1 in 2 device active raid1 /dev/md/boot. Use mdadm --examine for more detail. [root@2disk proc]# mdadm -Q /dev/sdb2 /dev/sdb2: is not an md array /dev/sdb2: device 1 in 2 device active raid1 /dev/md/pv00. Use mdadm --examine for more detail. [root@2disk md]# mdadm -Q /dev/md/boot /dev/md/boot: 953.44MiB raid1 2 devices, 0 spares. Use mdadm --detail for more detail. [root@2disk md]# mdadm -Q /dev/md/pv00 /dev/md/pv00: 31.05GiB raid1 2 devices, 0 spares. Use mdadm --detail for more detail. -- Fedora Users List - The place to go to get others to do the work for you _______________________________________________ users mailing list -- users@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe send an email to users-leave@xxxxxxxxxxxxxxxxxxxxxxx
