On 08/14/2012 12:44 PM, Jim wrote:
F17 / KDE
It will crash when trying install.
It will crash when your trying do yum update.
There is no pattern as to when it will crash.
When the crash happens it takes you back to a black screen with a lot
of white print.
Below is the last three lines of crash when I was trying to do a yum
update
889.604907 [drm] nouveau 0000:00:0d.0: Setting dpms mode3 on vga
encorder (output 0)
889.605017 [drm] nouveau 0000:00:0d.0: Setting dpms mode 0 on vga
encorder (output 0)
889.605017 [drm] nouveau 0000:00:0d.0: output vga-1 is running on CRTC
0 using output A
Here is a copy of dmesg for "drm"
[drm] Initialized drm 1.1.0 20060810
[ 1.248941] wmi: Mapper loaded
[ 1.259299] VGA switcheroo: detected Optimus DSM method \ handle
[ 1.259465] ACPI: PCI Interrupt Link [AIGP] enabled at IRQ 21
[ 1.259486] nouveau 0000:00:0d.0: setting latency timer to 64
[ 1.260475] [drm] nouveau 0000:00:0d.0: Detected an NV40 generation
card (0x04c000a2)
[ 1.260479] checking generic (d0000000 c00000) vs hw (d0000000 10000000)
[ 1.260481] fb: conflicting fb hw usage nouveaufb vs VESA VGA -
removing generic driver
[ 1.260503] Console: switching to colour dummy device 80x25
[ 1.262073] [drm] nouveau 0000:00:0d.0: Attempting to load BIOS image
from PRAMIN
[ 1.305483] [drm] nouveau 0000:00:0d.0: ... appears to be valid
[ 1.305486] [drm] nouveau 0000:00:0d.0: BIT BIOS found
[ 1.305488] [drm] nouveau 0000:00:0d.0: Bios version 05.61.32.31
[ 1.305492] [drm] nouveau 0000:00:0d.0: TMDS table version 1.1
[ 1.305899] [drm] nouveau 0000:00:0d.0: MXM: no VBIOS data, nothing to do
[ 1.305909] [drm] nouveau 0000:00:0d.0: DCB version 3.0
[ 1.305918] [drm] nouveau 0000:00:0d.0: DCB outp 00: 01000310 00000023
[ 1.305926] [drm] nouveau 0000:00:0d.0: DCB outp 01: 00110204 942b0003
[ 1.305932] [drm] nouveau 0000:00:0d.0: DCB conn 00: 0000
[ 1.305939] [drm] nouveau 0000:00:0d.0: DCB conn 01: 1131
[ 1.305945] [drm] nouveau 0000:00:0d.0: DCB conn 02: 0110
[ 1.305951] [drm] nouveau 0000:00:0d.0: DCB conn 03: 0111
[ 1.305956] [drm] nouveau 0000:00:0d.0: DCB conn 04: 0113
[ 1.305968] [drm] nouveau 0000:00:0d.0: Parsing VBIOS init table 0 at
offset 0xD9C9
[ 1.305976] [drm] nouveau 0000:00:0d.0: ======= misaligned reg
0x0060081D =======
[ 1.305991] [drm] nouveau 0000:00:0d.0: ======= misaligned reg
0x0060081D =======
[ 1.306146] [drm] nouveau 0000:00:0d.0: Parsing VBIOS init table 1 at
offset 0xDB17
[ 1.306153] [drm] nouveau 0000:00:0d.0: Parsing VBIOS init table 2 at
offset 0xDB18
[ 1.306310] [drm] nouveau 0000:00:0d.0: Parsing VBIOS init table 3 at
offset 0xDC9A
[ 1.306320] [drm] nouveau 0000:00:0d.0: Parsing VBIOS init table 4 at
offset 0xDCE3
[ 1.307188] [drm] nouveau 0000:00:0d.0: 1 available performance level(s)
[ 1.307199] [drm] nouveau 0000:00:0d.0: 0: core 425MHz shader 425MHz
fanspeed 100%
[ 1.307213] [drm] nouveau 0000:00:0d.0: c:
[ 1.307551] [TTM] Zone kernel: Available graphics memory: 435762 kiB.
[ 1.307555] [TTM] Zone highmem: Available graphics memory: 1162230 kiB.
[ 1.307556] [TTM] Initializing pool allocator.
[ 1.307572] [drm] nouveau 0000:00:0d.0: Detected 256MiB VRAM
[ 1.308674] [drm] nouveau 0000:00:0d.0: 64 MiB GART (aperture)
[ 1.312548] [drm] nouveau 0000:00:0d.0: DCB type 4 not known
[ 1.312550] [drm] nouveau 0000:00:0d.0: Unknown-1 has no encoders,
removing
[ 1.313552] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 1.313553] [drm] No driver support for vblank timestamp query.
[ 1.314459] [drm] nouveau 0000:00:0d.0: Setting dpms mode 3 on vga
encoder (output 0)
[ 1.353593] [drm] nouveau 0000:00:0d.0: allocated 1920x1080 fb:
0x49000, bo f364d000
[ 1.354213] fbcon: nouveaufb (fb0) is primary device
[ 1.374110] usb 2-3: New USB device found, idVendor=03f0, idProduct=0024
[ 1.374113] usb 2-3: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 1.374115] usb 2-3: Product: HP Basic USB Keyboard
[ 1.374117] usb 2-3: Manufacturer: CHICONY
[ 1.386657] input: CHICONY HP Basic USB Keyboard as
/devices/pci0000:00/0000:00:02.0/usb2/2-3/2-3:1.0/input/input2
[ 1.386905] generic-usb 0003:03F0:0024.0001: input,hidraw0: USB HID
v1.10 Keyboard [CHICONY HP Basic USB Keyboard] on usb-0000:00:02.0-3/input0
[ 1.415471] [drm] nouveau 0000:00:0d.0: Setting dpms mode 0 on vga
encoder (output 0)
[ 1.415481] [drm] nouveau 0000:00:0d.0: Output VGA-1 is running on
CRTC 0 using output A
[ 1.415521] Console: switching to colour frame buffer device 240x67
[ 1.418311] fb0: nouveaufb frame buffer device
[ 1.418316] drm: registered panic notifier
[ 1.418337] [drm] Initialized nouveau 0.0.16 20090420 for
0000:00:0d.0 on minor 0
--
users mailing list
users@xxxxxxxxxxxxxxxxxxxxxxx
To unsubscribe or change subscription options:
https://admin.fedoraproject.org/mailman/listinfo/users
Guidelines: http://fedoraproject.org/wiki/Mailing_list_guidelines
Have a question? Ask away: http://ask.fedoraproject.org
