On Friday 16 February 2018 03:15 AM, Ed Greshko wrote:
On 02/16/18 00:53, Steven Haigh wrote:
I think you missed the question. What the GUI shows and what reality is are
two different things. I've had the GUI show 100/half - yet the switch port
indicates 1000/full.
Exactly. And that is why I had requested the output of ethtool.
I have your same situation. ethtool says auto-neg on and
100Mbps/full-duplex while the GUI has auto-neg disabled and shows
100Mbps/half-duplex.
The ifcfg file is also similar to yours.
Syam
I just installed a fresh copy of F27/KDE from the Live-ISO. Bringing up the
Network-Manager GUI one sees
Allow Auto-negotiation: Unchecked
Speed: Automatic
Duplex: Half
The hardware is
00:03.0 Ethernet controller: Intel Corporation 82540EM Gigabit Ethernet Controller
The driver in use is (from lsmod) e1000.
The ifcfg-enp0s3 file contains...
[egreshko@f27k-v network-scripts]$ cat ifcfg-enp0s3
TYPE=Ethernet
PROXY_METHOD=none
BROWSER_ONLY=no
BOOTPROTO=dhcp
DEFROUTE=yes
IPV4_FAILURE_FATAL=no
IPV6INIT=yes
IPV6_AUTOCONF=yes
IPV6_DEFROUTE=yes
IPV6_FAILURE_FATAL=no
IPV6_ADDR_GEN_MODE=stable-privacy
NAME=enp0s3
UUID=7f87f7d8-1d0f-316e-9a2c-419042156b19
ONBOOT=yes
AUTOCONNECT_PRIORITY=-999
DEVICE=enp0s3
(No, ETHTOOL_OPTS= line)
And ethtool reports....
Settings for enp0s3:
Supported ports: [ TP ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Supported pause frame use: No
Supports auto-negotiation: Yes
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Advertised pause frame use: No
Advertised auto-negotiation: Yes
Speed: 1000Mb/s
Duplex: Full
Port: Twisted Pair
PHYAD: 0
Transceiver: internal
Auto-negotiation: on
MDI-X: off (auto)
Cannot get wake-on-lan settings: Operation not permitted
Current message level: 0x00000007 (7)
drv probe link
Link detected: yes
So, what the GUI has and what reality is are different. Possibly a function of the
driver?
Oh, well.... I suppose I'll follow the BZ.
_______________________________________________
kde mailing list -- kde@xxxxxxxxxxxxxxxxxxxxxxx
To unsubscribe send an email to kde-leave@xxxxxxxxxxxxxxxxxxxxxxx
_______________________________________________
kde mailing list -- kde@xxxxxxxxxxxxxxxxxxxxxxx
To unsubscribe send an email to kde-leave@xxxxxxxxxxxxxxxxxxxxxxx
