On 02/16/18 00:53, Steven Haigh wrote: > I think you missed the question. What the GUI shows and what reality is are > two different things. I've had the GUI show 100/half - yet the switch port > indicates 1000/full. Exactly. And that is why I had requested the output of ethtool. I just installed a fresh copy of F27/KDE from the Live-ISO. Bringing up the Network-Manager GUI one sees Allow Auto-negotiation: Unchecked Speed: Automatic Duplex: Half The hardware is 00:03.0 Ethernet controller: Intel Corporation 82540EM Gigabit Ethernet Controller The driver in use is (from lsmod) e1000. The ifcfg-enp0s3 file contains... [egreshko@f27k-v network-scripts]$ cat ifcfg-enp0s3 TYPE=Ethernet PROXY_METHOD=none BROWSER_ONLY=no BOOTPROTO=dhcp DEFROUTE=yes IPV4_FAILURE_FATAL=no IPV6INIT=yes IPV6_AUTOCONF=yes IPV6_DEFROUTE=yes IPV6_FAILURE_FATAL=no IPV6_ADDR_GEN_MODE=stable-privacy NAME=enp0s3 UUID=7f87f7d8-1d0f-316e-9a2c-419042156b19 ONBOOT=yes AUTOCONNECT_PRIORITY=-999 DEVICE=enp0s3 (No, ETHTOOL_OPTS= line) And ethtool reports.... Settings for enp0s3: Supported ports: [ TP ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Supported pause frame use: No Supports auto-negotiation: Yes Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Advertised pause frame use: No Advertised auto-negotiation: Yes Speed: 1000Mb/s Duplex: Full Port: Twisted Pair PHYAD: 0 Transceiver: internal Auto-negotiation: on MDI-X: off (auto) Cannot get wake-on-lan settings: Operation not permitted Current message level: 0x00000007 (7) drv probe link Link detected: yes So, what the GUI has and what reality is are different. Possibly a function of the driver? Oh, well.... I suppose I'll follow the BZ. -- A motto of mine is: When in doubt, try it out
Attachment:
signature.asc
Description: OpenPGP digital signature
_______________________________________________ kde mailing list -- kde@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe send an email to kde-leave@xxxxxxxxxxxxxxxxxxxxxxx
