On 12/5/18 5:41 PM, Stewart Samuels wrote:
Did you change the root blkid in the extlinux.conf and /etc/fstab
files to be consistent with your your ssd? I am booting and using F29
Mate on my Odroid-Xu4 with no issues. However, that said, I created
my own boot script as well to download and install Fedora images,
rather than use the fedora_arm_installer. But one of the thing my
script does is change the blkids for all partitions.
In this test, there are NO partitions on the uSD card. Only partitions
on the sata drive. This is how it works on the Cubieboards and some
other Allwinner based SOC. There is no need in this case to change the
UUIDs. The uboot knows nothing of UUIDs.
And the HC1 has not video connection so only a headless image is applicable.
Stewart
On 12/5/18 2:15 PM, Peter Robinson wrote:
U-Boot 2018.09 (Sep 11 2018 - 09:51:41 +0000) for ODROID-XU3/XU4/HC1
CPU: Exynos5422 @ 800 MHz
Model: Odroid XU3 based on EXYNOS5422
Board: Odroid XU3 based on EXYNOS5422
Type: hc1
DRAM: 2 GiB
MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 2
Loading Environment from MMC... Card did not respond to voltage
select!
*** Warning - No block device, using default environment
In: serial
Out: serial
Err: serial
Net: No ethernet found.
Hit any key to stop autoboot: 0
MMC Device 1 not found
no mmc device at slot 1
Card did not respond to voltage select!
switch to partitions #0, OK
mmc2 is current device
** Invalid partition 1 **
starting USB...
USB0: USB EHCI 1.00
USB1: Register 2000140 NbrPorts 2
Starting the controller
USB XHCI 1.00
USB2: Register 2000140 NbrPorts 2
Starting the controller
USB XHCI 1.00
scanning bus 0 for devices... 1 USB Device(s) found
scanning bus 1 for devices... cannot reset port 1!?
2 USB Device(s) found
scanning bus 2 for devices... 2 USB Device(s) found
scanning usb for storage devices... 1 Storage Device(s)
found
scanning usb for ethernet devices... 1 Ethernet
Device(s) found
Waiting for Ethernet connection... done.
BOOTP broadcast 1
BOOTP broadcast 2
DHCP client bound to address 192.168.192.15 (5004 ms)
*** ERROR: `serverip' not set
==================================
Setup was a 4GB uSD that only had the hardkernel bootloader and
uboot.
No partitions.
Well that bit seems to be working from the details above.
sata drive (SSD) had the image (all partitions) installed. Including
changes to extlinux.conf
It finds the USB storage in the output above.
Why do you need to change the extlinux.conf? It should just work no
matter what the storage. What changes did you make?
Per
https://blog.christophersmart.com/2018/04/28/fedora-on-odroid-hc1-mini-nas-armv7/
"First things first, we need to enable the serial console, turn off
cpuidle else it won’t boot, and fix a bug where USB doesn’t load in the
right order. We do this by mounting the boot partition on the SD card
and modifying the extlinux bootloader configuration."
sed -i "s|append|& cpuidle.off=1 \
console=tty1 console=ttySAC2,115200n8 \
rd.driver.pre=ledtrig-heartbeat,xhci-plat-hcd no_bL_switcher|" \
/run/media/rgm/__boot/extlinux/extlinux.conf
But I don't see above where it is even getting to the boot partition on
the sata drive. But you understand this much better than I, so all
help
appreciated!
So if you interrupt the boot process can you use the U-Boot ls command
to see if it can see the contents of the first partition on the disk?
_______________________________________________
arm mailing list -- arm@xxxxxxxxxxxxxxxxxxxxxxx
To unsubscribe send an email to arm-leave@xxxxxxxxxxxxxxxxxxxxxxx
Fedora Code of Conduct: https://getfedora.org/code-of-conduct.html
List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
List Archives:
https://lists.fedoraproject.org/archives/list/arm@xxxxxxxxxxxxxxxxxxxxxxx
_______________________________________________
arm mailing list -- arm@xxxxxxxxxxxxxxxxxxxxxxx
To unsubscribe send an email to arm-leave@xxxxxxxxxxxxxxxxxxxxxxx
Fedora Code of Conduct: https://getfedora.org/code-of-conduct.html
List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
List Archives:
https://lists.fedoraproject.org/archives/list/arm@xxxxxxxxxxxxxxxxxxxxxxx
_______________________________________________
arm mailing list -- arm@xxxxxxxxxxxxxxxxxxxxxxx
To unsubscribe send an email to arm-leave@xxxxxxxxxxxxxxxxxxxxxxx
Fedora Code of Conduct: https://getfedora.org/code-of-conduct.html
List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
List Archives: https://lists.fedoraproject.org/archives/list/arm@xxxxxxxxxxxxxxxxxxxxxxx
