Re: test results on odroid-hc1 on booting from sata

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Dec 5, 2018 at 7:57 PM Robert Moskowitz <rgm@xxxxxxxxxxxxxxx> wrote:
>
> Does not work.  Sigh.
>
> U-Boot 2018.09 (Sep 11 2018 - 09:51:41 +0000) for ODROID-XU3/XU4/HC1
>
> CPU:   Exynos5422 @ 800 MHz
> Model: Odroid XU3 based on EXYNOS5422
> Board: Odroid XU3 based on EXYNOS5422
> Type:  hc1
> DRAM:  2 GiB
> MMC:   EXYNOS DWMMC: 0, EXYNOS DWMMC: 2
> Loading Environment from MMC... Card did not respond to voltage select!
> *** Warning - No block device, using default environment
>
> In:    serial
> Out:   serial
> Err:   serial
> Net:   No ethernet found.
> Hit any key to stop autoboot:  0
> MMC Device 1 not found
> no mmc device at slot 1
> Card did not respond to voltage select!
> switch to partitions #0, OK
> mmc2 is current device
> ** Invalid partition 1 **
> starting USB...
> USB0:   USB EHCI 1.00
> USB1:   Register 2000140 NbrPorts 2
> Starting the controller
> USB XHCI 1.00
> USB2:   Register 2000140 NbrPorts 2
> Starting the controller
> USB XHCI 1.00
> scanning bus 0 for devices... 1 USB Device(s) found
> scanning bus 1 for devices... cannot reset port 1!?
> 2 USB Device(s) found
> scanning bus 2 for devices... 2 USB Device(s) found
>         scanning usb for storage devices... 1 Storage Device(s) found
>         scanning usb for ethernet devices... 1 Ethernet Device(s) found
> Waiting for Ethernet connection... done.
> BOOTP broadcast 1
> BOOTP broadcast 2
> DHCP client bound to address 192.168.192.15 (5004 ms)
> *** ERROR: `serverip' not set
>
> ==================================
>
> Setup was a 4GB uSD that only had the hardkernel bootloader and uboot.
> No partitions.

Well that bit seems to be working from the details above.

> sata drive (SSD) had the image (all partitions) installed. Including
> changes to extlinux.conf

It finds the USB storage in the output above.

Why do you need to change the extlinux.conf? It should just work no
matter what the storage. What changes did you make?

Peter
_______________________________________________
arm mailing list -- arm@xxxxxxxxxxxxxxxxxxxxxxx
To unsubscribe send an email to arm-leave@xxxxxxxxxxxxxxxxxxxxxxx
Fedora Code of Conduct: https://getfedora.org/code-of-conduct.html
List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
List Archives: https://lists.fedoraproject.org/archives/list/arm@xxxxxxxxxxxxxxxxxxxxxxx




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [Linux ARM (Vger)]     [Linux ARM]     [ARM Kernel]     [Fedora User Discussion]     [Older Fedora Users Discussion]     [Fedora Advisory Board]     [Fedora Security]     [Fedora Maintainers]     [Fedora Devel Java]     [Fedora Legacy]     [Fedora Desktop]     [ATA RAID]     [Fedora Marketing]     [Fedora Mentors]     [Fedora Package Announce]     [Fedora Package Review]     [Fedora Music]     [Fedora Packaging]     [Centos]     [Fedora SELinux]     [Coolkey]     [Yum Users]     [Tux]     [Yosemite News]     [Linux Apps]     [KDE Users]     [Fedora Tools]     [Fedora Art]     [Fedora Docs]     [Asterisk PBX]

Powered by Linux