Re: Odrouid XU4 with Fedora

[arm_ml@xxxxxxxxxxx]

Am 2017-07-20 19:12, schrieb Andreas Reschke:
> Am 19.07.2017 um 19:02 schrieb Andreas Reschke:
> > Am 19.07.2017 um 18:11 schrieb Peter Robinson:
> > --- cut ---
> >
> > Stop at the same line:
> >
> > U-Boot 2016.05 (May 30 2016 - 20:03:50 +0000) for ODROID-XU3
> >
> > CPU:   Exynos5422 @ 800 MHz
> > Model: Odroid XU3 based on EXYNOS5422
> > Board: Odroid XU3 based on EXYNOS5422
> > Type:  xu4
> > DRAM:  2 GiB
> > MMC:   EXYNOS DWMMC: 0, EXYNOS DWMMC: 1
> > *** Warning - bad CRC, using default environment
> >
> > In:    serial
> > Out:   serial
> > Err:   serial
> > Net:   No ethernet found.
> > Hit any key to stop autoboot:  0
> > switch to partitions #0, OK
> > mmc0 is current device
> > Scanning mmc 0:1...
> > Found /extlinux/extlinux.conf
> > Retrieving file: /extlinux/extlinux.conf
> > 896 bytes read in 12 ms (72.3 KiB/s)
> > Ignoring unknown command: ui
> > Ignoring malformed menu command:  autoboot
> > Ignoring malformed menu command:  hidden
> > Ignoring unknown command: totaltimeout
> > Ignoring unknown command: default=Fedora
> > Fedora-Mate-armhfp-24-1.2 Boot Options.
> > 1:      Fedora (4.11.10-300.fc26.armv7hl) 26 (Twenty Six)
> > 2:      Fedora (4.6.5-300.fc24.armv7hl) 24 (Twenty Four)
> > Enter choice: 1:        Fedora (4.11.10-300.fc26.armv7hl) 26 (Twenty 
> > Six)
> > Retrieving file: /initramfs-4.11.10-300.fc26.armv7hl.img
> > 54912569 bytes read in 5169 ms (10.1 MiB/s)
> > Retrieving file: /vmlinuz-4.11.10-300.fc26.armv7hl
> > 6267464 bytes read in 592 ms (10.1 MiB/s)
> > append: ro root=UUID=dfac3a15-7d31-46ed-842f-2f7599871202
> > LANG=en_US.UTF-8 enforcing=1 console=ttySAC2,115200 console=tty0
> > Retrieving file: 
> > /dtb-4.11.10-300.fc26.armv7hl/exynos5422-odroidxu4.dtb
> > 54941 bytes read in 895 ms (59.6 KiB/s)
> > Kernel image @ 0x42000000 [ 0x000000 - 0x5fa248 ]
> > ## Flattened Device Tree blob at 43000000
> >    Booting using the fdt blob at 0x43000000
> >    Loading Ramdisk to 4cba1000, end 4ffff639 ... OK
> >    Loading Device Tree to 4cb90000, end 4cba069c ... OK
> >
> > Starting kernel ...
> > ......
> >
> > [    6.013567] NET: Registered protocol family 10
> >
> > Fan is running, no more output


Peter

Any tipps and tricks?

Even with kernel 4.11.11-300.fc26.armv7hl isn't working.

Thanks
Andreas
_______________________________________________
arm mailing list -- arm@xxxxxxxxxxxxxxxxxxxxxxx
To unsubscribe send an email to arm-leave@xxxxxxxxxxxxxxxxxxxxxxx