Am 19.07.2017 um 19:02 schrieb Andreas Reschke: > Am 19.07.2017 um 18:11 schrieb Peter Robinson: > --- cut --- > > Stop at the same line: > > U-Boot 2016.05 (May 30 2016 - 20:03:50 +0000) for ODROID-XU3 > > CPU: Exynos5422 @ 800 MHz > Model: Odroid XU3 based on EXYNOS5422 > Board: Odroid XU3 based on EXYNOS5422 > Type: xu4 > DRAM: 2 GiB > MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 > *** Warning - bad CRC, using default environment > > In: serial > Out: serial > Err: serial > Net: No ethernet found. > Hit any key to stop autoboot: 0 > switch to partitions #0, OK > mmc0 is current device > Scanning mmc 0:1... > Found /extlinux/extlinux.conf > Retrieving file: /extlinux/extlinux.conf > 896 bytes read in 12 ms (72.3 KiB/s) > Ignoring unknown command: ui > Ignoring malformed menu command: autoboot > Ignoring malformed menu command: hidden > Ignoring unknown command: totaltimeout > Ignoring unknown command: default=Fedora > Fedora-Mate-armhfp-24-1.2 Boot Options. > 1: Fedora (4.11.10-300.fc26.armv7hl) 26 (Twenty Six) > 2: Fedora (4.6.5-300.fc24.armv7hl) 24 (Twenty Four) > Enter choice: 1: Fedora (4.11.10-300.fc26.armv7hl) 26 (Twenty Six) > Retrieving file: /initramfs-4.11.10-300.fc26.armv7hl.img > 54912569 bytes read in 5169 ms (10.1 MiB/s) > Retrieving file: /vmlinuz-4.11.10-300.fc26.armv7hl > 6267464 bytes read in 592 ms (10.1 MiB/s) > append: ro root=UUID=dfac3a15-7d31-46ed-842f-2f7599871202 > LANG=en_US.UTF-8 enforcing=1 console=ttySAC2,115200 console=tty0 > Retrieving file: /dtb-4.11.10-300.fc26.armv7hl/exynos5422-odroidxu4.dtb > 54941 bytes read in 895 ms (59.6 KiB/s) > Kernel image @ 0x42000000 [ 0x000000 - 0x5fa248 ] > ## Flattened Device Tree blob at 43000000 > Booting using the fdt blob at 0x43000000 > Loading Ramdisk to 4cba1000, end 4ffff639 ... OK > Loading Device Tree to 4cb90000, end 4cba069c ... OK > > Starting kernel ... > ...... > > [ 6.013567] NET: Registered protocol family 10 > > Fan is running, no more output > > Port/connector: ID 067b:2303 Prolific Technology, Inc. PL2303 Serial Port > > All installations on all my ARM boards I#ve done with adapter with out > any problems. > > Andreas > _______________________________________________ > arm mailing list -- arm@xxxxxxxxxxxxxxxxxxxxxxx > To unsubscribe send an email to arm-leave@xxxxxxxxxxxxxxxxxxxxxxx > Peter Any tipps and tricks? A fresh installation with fedora-arm-image-installer didn't work because of the disc layout. Begin at 3072 is necessary because u-boot install script to install u-boot.bin makes the the boot partition unreadable if you use either the Fedora install script. Thanks Andreas _______________________________________________ arm mailing list -- arm@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe send an email to arm-leave@xxxxxxxxxxxxxxxxxxxxxxx
