Am 19.07.2017 um 18:11 schrieb Peter Robinson: --- cut --- >> >> Boot up: >> U-Boot 2016.05 (May 30 2016 - 20:03:50 +0000) for ODROID-XU3 >> >> CPU: Exynos5422 @ 800 MHz >> Model: Odroid XU3 based on EXYNOS5422 >> Board: Odroid XU3 based on EXYNOS5422 >> Type: xu4 >> DRAM: 2 GiB >> MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 >> *** Warning - bad CRC, using default environment >> >> In: serial >> Out: serial >> Err: serial >> Net: No ethernet found. >> Hit any key to stop autoboot: 0 >> switch to partitions #0, OK >> mmc0 is current device >> Scanning mmc 0:1... >> Found /extlinux/extlinux.conf >> Retrieving file: /extlinux/extlinux.conf >> 1090 bytes read in 12 ms (87.9 KiB/s) >> Ignoring unknown command: ui >> Ignoring malformed menu command: autoboot >> Ignoring malformed menu command: hidden >> Ignoring unknown command: totaltimeout >> Ignoring unknown command: default=Fedora >> Fedora-Mate-armhfp-24-1.2 Boot Options. >> 1: Fedora (4.11.10-300.fc26.armv7hl) 26 (Twenty Six) >> 2: Fedora (4.6.5-300.fc24.armv7hl) 24 (Twenty Four) >> Enter choice: 1 >> 1: Fedora (4.11.10-300.fc26.armv7hl) 26 (Twenty Six) >> Retrieving file: /initramfs-4.11.10-300.fc26.armv7hl.img >> 17067584 bytes read in 1600 ms (10.2 MiB/s) >> Retrieving file: /vmlinuz-4.11.10-300.fc26.armv7hl >> 6267464 bytes read in 595 ms (10 MiB/s) >> append: ro root=UUID=dfac3a15-7d31-46ed-842f-2f7599871202 >> LANG=en_US.UTF-8 enforcing=1 >> Retrieving file: /dtb-4.11.10-300.fc26.armv7hl/exynos5422-odroidxu4.dtb >> 54941 bytes read in 913 ms (58.6 KiB/s) >> Kernel image @ 0x42000000 [ 0x000000 - 0x5fa248 ] >> ## Flattened Device Tree blob at 43000000 >> Booting using the fdt blob at 0x43000000 >> Loading Ramdisk to 4efb9000, end 4ffffe40 ... OK >> Loading Device Tree to 4efa8000, end 4efb869c ... OK >> >> Starting kernel ... >> >> [ 0.000000] Booting Linux on physical CPU 0x100 >> [ 0.000000] Linux version 4.11.10-300.fc26.armv7hl >> (mockbuild@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx) (gcc version 7.1.1 >> 20170622 (Red Hat 7.1.1-3) (GCC) ) #1 SMP Wed Jul 12 18:27:21 UTC 2017 >> [ 0.000000] CPU: ARMv7 Processor [410fc073] revision 3 (ARMv7), >> cr=10c5387d >> [ 0.000000] CPU: div instructions available: patching division code >> [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing >> instruction cache >> [ 0.000000] OF: fdt: Machine model: Hardkernel Odroid XU4 >> [ 0.000000] Memory policy: Data cache writealloc >> [ 0.000000] efi: Getting EFI parameters from FDT: >> [ 0.000000] efi: UEFI not found. >> [ 0.000000] Reserved memory: created DMA memory pool at 0xbe200000, >> size 8 MiB >> [ 0.000000] OF: reserved mem: initialized node region_mfc_right, >> compatible id shared-dma-pool >> [ 0.000000] Reserved memory: created DMA memory pool at 0xbbe00000, >> size 36 MiB >> [ 0.000000] OF: reserved mem: initialized node region_mfc_left, >> compatible id shared-dma-pool >> [ 0.000000] cma: Reserved 64 MiB at 0xb7c00000 >> [ 0.000000] Samsung CPU ID: 0xe5422001 >> [ 0.000000] Running under secure firmware. >> [ 0.000000] percpu: Embedded 15 pages/cpu @eede0000 s31628 r8192 >> d21620 u61440 >> [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. >> Total pages: 505664 >> [ 0.000000] Kernel command line: ro >> root=UUID=dfac3a15-7d31-46ed-842f-2f7599871202 LANG=en_US.UTF-8 enforcing=1 >> [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) >> [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 >> bytes) >> [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 >> bytes) >> [ 0.000000] Memory: 1912816K/2029568K available (7440K kernel code, >> 1301K rwdata, 3528K rodata, 2048K init, 518K bss, 51216K reserved, >> 65536K cma-reserved, 1177600K highmem) >> [ 0.000000] Virtual kernel memory layout: >> [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) >> [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) >> [ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB) >> [ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB) >> [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) >> [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) >> [ 0.000000] .text : 0xc0208000 - 0xc0a4400c (8433 kB) >> [ 0.000000] .init : 0xc0e00000 - 0xc1000000 (2048 kB) >> [ 0.000000] .data : 0xc1000000 - 0xc11455c4 (1302 kB) >> [ 0.000000] .bss : 0xc11455c4 - 0xc11c71a0 ( 519 kB) >> [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 >> [ 0.000000] Hierarchical RCU implementation. >> [ 0.000000] Build-time adjustment of leaf fanout to 32. >> [ 0.000000] RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=8. >> [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=8 >> [ 0.000000] NR_IRQS:16 nr_irqs:16 16 >> [ 0.000000] GIC: Using split EOI/Deactivate mode >> [ 0.000000] GIC physical location is 0x10481000 >> [ 0.000000] Switching to timer-based delay loop, resolution 41ns >> [ 0.000000] clocksource: mct-frc: mask: 0xffffffff max_cycles: >> 0xffffffff, max_idle_ns: 79635851949 ns >> [ 0.000007] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps >> every 89478484971ns >> [ 0.007600] Console: colour dummy device 80x30 >> [ 0.008724] console [tty0] enabled >> [ 0.008786] Calibrating delay loop (skipped), value calculated using >> timer frequency.. 48.00 BogoMIPS (lpj=24000) >> [ 0.008848] pid_max: default: 32768 minimum: 301 >> [ 0.009341] Security Framework initialized >> [ 0.009379] Yama: becoming mindful. >> [ 0.009426] SELinux: Initializing. >> [ 0.009846] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) >> [ 0.009886] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 >> bytes) >> [ 0.011186] CPU: Testing write buffer coherency: ok >> [ 0.011262] ftrace: allocating 31692 entries in 62 pages >> [ 0.090950] CPU0: update cpu_capacity 448 >> [ 0.091057] CPU0: thread -1, cpu 0, socket 1, mpidr 80000100 >> [ 0.091763] Setting up static identity map for 0x40300000 - 0x40300098 >> [ 0.092521] ARM CCI driver probed >> [ 0.092755] Exynos MCPM support installed >> [ 0.101355] EFI services will not be available. >> [ 0.102072] smp: Bringing up secondary CPUs ... >> [ 0.103165] CPU1: update cpu_capacity 448 >> [ 0.103173] CPU1: thread -1, cpu 1, socket 1, mpidr 80000101 >> [ 0.104342] CPU2: update cpu_capacity 448 >> [ 0.104350] CPU2: thread -1, cpu 2, socket 1, mpidr 80000102 >> [ 0.105491] CPU3: update cpu_capacity 448 >> [ 0.105499] CPU3: thread -1, cpu 3, socket 1, mpidr 80000103 >> [ 0.106670] CPU4: update cpu_capacity 1535 >> [ 0.106679] CPU4: thread -1, cpu 0, socket 0, mpidr 80000000 >> [ 0.107925] CPU5: update cpu_capacity 1535 >> [ 0.107934] CPU5: thread -1, cpu 1, socket 0, mpidr 80000001 >> [ 0.109096] CPU6: update cpu_capacity 1535 >> [ 0.109105] CPU6: thread -1, cpu 2, socket 0, mpidr 80000002 >> [ 0.110256] CPU7: update cpu_capacity 1535 >> [ 0.110265] CPU7: thread -1, cpu 3, socket 0, mpidr 80000003 >> [ 0.110407] smp: Brought up 1 node, 8 CPUs >> [ 0.110714] SMP: Total of 8 processors activated (384.00 BogoMIPS). >> [ 0.110742] CPU: WARNING: CPU(s) started in wrong/inconsistent modes >> (primary CPU mode 0x1a) >> [ 0.110780] CPU: This may indicate a broken bootloader or firmware. >> [ 0.113527] devtmpfs: initialized >> [ 0.136918] VFP support v0.3: implementor 41 architecture 2 part 30 >> variant 7 rev 3 >> [ 0.137515] clocksource: jiffies: mask: 0xffffffff max_cycles: >> 0xffffffff, max_idle_ns: 1911260446275000 ns >> [ 0.137579] futex hash table entries: 2048 (order: 5, 131072 bytes) >> [ 0.142086] pinctrl core: initialized pinctrl subsystem >> [ 0.145664] NET: Registered protocol family 16 >> [ 0.148073] DMA: preallocated 256 KiB pool for atomic coherent >> allocations >> [ 0.153264] cpuidle: using governor menu >> [ 0.154603] No ATAGs? >> [ 0.154924] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 >> watchpoint registers. >> [ 0.154986] hw-breakpoint: maximum watchpoint size is 8 bytes. >> [ 0.156839] Serial: AMBA PL011 UART driver >> [ 0.169503] random: fast init done >> [ 0.193691] EXYNOS5420 PMU initialized >> [ 0.236333] vgaarb: loaded >> [ 0.237391] SCSI subsystem initialized >> [ 0.238130] usbcore: registered new interface driver usbfs >> [ 0.238252] usbcore: registered new interface driver hub >> [ 0.238475] usbcore: registered new device driver usb >> [ 0.240966] NetLabel: Initializing >> [ 0.241038] NetLabel: domain hash size = 128 >> [ 0.241062] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO >> [ 0.241165] NetLabel: unlabeled traffic allowed by default >> [ 0.241725] clocksource: Switched to clocksource mct-frc >> [ 0.344825] VFS: Disk quotas dquot_6.6.0 >> [ 0.344984] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 >> bytes) >> [ 0.363604] NET: Registered protocol family 2 >> [ 0.364879] TCP established hash table entries: 8192 (order: 3, 32768 >> bytes) >> [ 0.365013] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) >> [ 0.365215] TCP: Hash tables configured (established 8192 bind 8192) >> [ 0.365476] UDP hash table entries: 512 (order: 2, 16384 bytes) >> [ 0.365547] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) >> [ 0.366199] NET: Registered protocol family 1 >> [ 0.367057] Unpacking initramfs... >> [ 1.737042] Freeing initrd memory: 16668K >> [ 1.814133] audit: initializing netlink subsys (disabled) >> [ 1.814362] audit: type=2000 audit(1.757:1): state=initialized >> audit_enabled=0 res=1 >> [ 1.814834] Initialise system trusted keyrings >> [ 1.815075] workingset: timestamp_bits=14 max_order=19 bucket_order=5 >> [ 1.823041] zbud: loaded >> [ 2.313027] NET: Registered protocol family 38 >> [ 2.313063] Key type asymmetric registered >> [ 2.313086] Asymmetric key parser 'x509' registered >> [ 2.313175] bounce: pool size: 64 pages >> [ 2.313274] Block layer SCSI generic (bsg) driver version 0.4 loaded >> (major 250) >> [ 2.313511] io scheduler noop registered >> [ 2.313535] io scheduler deadline registered >> [ 2.314019] io scheduler cfq registered (default) >> [ 2.314045] io scheduler mq-deadline registered >> [ 2.314578] atomic64_test: passed >> [ 2.339299] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled >> [ 2.348980] Serial: AMBA driver >> [ 2.349260] 12c00000.serial: ttySAC0 at MMIO 0x12c00000 (irq = 58, >> base_baud = 0) is a S3C6400/10 >> [ 2.349682] 12c10000.serial: ttySAC1 at MMIO 0x12c10000 (irq = 59, >> base_baud = 0) is a S3C6400/10 >> [ 2.350146] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 60, >> base_baud = 0) is a S3C6400/10 >> [ 3.108590] console [ttySAC2] enabled >> [ 3.112668] 12c30000.serial: ttySAC3 at MMIO 0x12c30000 (irq = 61, >> base_baud = 0) is a S3C6400/10 >> [ 3.123208] msm_serial: driver initialized >> [ 3.126206] STMicroelectronics ASC driver initialized >> [ 3.135591] libphy: Fixed MDIO Bus: probed >> [ 3.139067] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver >> [ 3.144828] ehci-pci: EHCI PCI platform driver >> [ 3.149265] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver >> [ 3.155353] ohci-pci: OHCI PCI platform driver >> [ 3.159814] uhci_hcd: USB Universal Host Controller Interface driver >> [ 3.166425] usbcore: registered new interface driver usbserial >> [ 3.171949] usbcore: registered new interface driver usbserial_generic >> [ 3.178447] usbserial: USB Serial support registered for generic >> [ 3.184638] mousedev: PS/2 mouse device common for all mice >> [ 3.197828] device-mapper: uevent: version 1.0.3 >> [ 3.201619] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) >> initialised: dm-devel@xxxxxxxxxx >> [ 3.212470] ledtrig-cpu: registered to indicate activity on CPUs >> [ 3.217424] hidraw: raw HID events driver (C) Jiri Kosina >> [ 3.222640] usbcore: registered new interface driver usbhid >> [ 3.227962] usbhid: USB HID core driver >> [ 3.234593] drop_monitor: Initializing network drop monitor service >> [ 3.239698] ip_tables: (C) 2000-2006 Netfilter Core Team >> [ 3.244987] Initializing XFRM netlink socket >> [ 3.249796] NET: Registered protocol family 10 >> >> No more output on serial console, no display, no ping. > > No serial console on the kernel cmd line: > Kernel command line: ro root=UUID=dfac3a15-7d31-46ed-842f-2f7599871202 > LANG=en_US.UTF-8 enforcing=1 > > I suspect when the kernel serial port driver gets inited is when you > lose it. Can you add a "console=ttySACX,115200 console=tty0" (swap X > for what ever the number is) on the append line in extlinux.conf > > Also what port/connector do you have the monitor attached to? > >> [root@myodroid ~]# lsinitrd /boot/initramfs-4.6.5-300.fc24.armv7hl.img | > > That was just for you to compare you got the appropriate MMC drivers. > _______________________________________________ > arm mailing list -- arm@xxxxxxxxxxxxxxxxxxxxxxx > To unsubscribe send an email to arm-leave@xxxxxxxxxxxxxxxxxxxxxxx > Stop at the same line: U-Boot 2016.05 (May 30 2016 - 20:03:50 +0000) for ODROID-XU3 CPU: Exynos5422 @ 800 MHz Model: Odroid XU3 based on EXYNOS5422 Board: Odroid XU3 based on EXYNOS5422 Type: xu4 DRAM: 2 GiB MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 1 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: No ethernet found. Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc0 is current device Scanning mmc 0:1... Found /extlinux/extlinux.conf Retrieving file: /extlinux/extlinux.conf 896 bytes read in 12 ms (72.3 KiB/s) Ignoring unknown command: ui Ignoring malformed menu command: autoboot Ignoring malformed menu command: hidden Ignoring unknown command: totaltimeout Ignoring unknown command: default=Fedora Fedora-Mate-armhfp-24-1.2 Boot Options. 1: Fedora (4.11.10-300.fc26.armv7hl) 26 (Twenty Six) 2: Fedora (4.6.5-300.fc24.armv7hl) 24 (Twenty Four) Enter choice: 1: Fedora (4.11.10-300.fc26.armv7hl) 26 (Twenty Six) Retrieving file: /initramfs-4.11.10-300.fc26.armv7hl.img 54912569 bytes read in 5169 ms (10.1 MiB/s) Retrieving file: /vmlinuz-4.11.10-300.fc26.armv7hl 6267464 bytes read in 592 ms (10.1 MiB/s) append: ro root=UUID=dfac3a15-7d31-46ed-842f-2f7599871202 LANG=en_US.UTF-8 enforcing=1 console=ttySAC2,115200 console=tty0 Retrieving file: /dtb-4.11.10-300.fc26.armv7hl/exynos5422-odroidxu4.dtb 54941 bytes read in 895 ms (59.6 KiB/s) Kernel image @ 0x42000000 [ 0x000000 - 0x5fa248 ] ## Flattened Device Tree blob at 43000000 Booting using the fdt blob at 0x43000000 Loading Ramdisk to 4cba1000, end 4ffff639 ... OK Loading Device Tree to 4cb90000, end 4cba069c ... OK Starting kernel ... ...... [ 6.013567] NET: Registered protocol family 10 Fan is running, no more output Port/connector: ID 067b:2303 Prolific Technology, Inc. PL2303 Serial Port All installations on all my ARM boards I#ve done with adapter with out any problems. Andreas _______________________________________________ arm mailing list -- arm@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe send an email to arm-leave@xxxxxxxxxxxxxxxxxxxxxxx
