Can you try root=/dev/mmcblk0p4 in the boot args? > On Mar 2, 2015, at 2:18 AM, Sergio Durigan Junior <sergiodj@xxxxxxxxxxxx> wrote: > >> On Sunday, March 01 2015, Scott M. Jones wrote: >> >> I ran into a problem where the kernel needs to load a vfat module in >> order to read /boot but the module is on /boot, so it goes to >> emergency mode. So you need to create a separate vfat partition for >> MLO and u-boot.img and leave /boot as ext. Make the vfat partition p1 >> and turn on the bootable flag. (Or else recompile the kernel with >> vfat built in, not a module.) > > So, after spending a lot of time struggling with this, I finally managed > to go back to where I was before: i.e., booting, but not able to mount > the rootfs. > > Here's how my SDCard looks now: > > Disk /dev/mmcblk0: 14.9 GiB, 16021192704 bytes, 31291392 sectors > Units: sectors of 1 * 512 = 512 bytes > Sector size (logical/physical): 512 bytes / 512 bytes > I/O size (minimum/optimal): 512 bytes / 512 bytes > Disklabel type: dos > Disk identifier: 0x00000000 > > Device Boot Start End Sectors Size Id Type > /dev/mmcblk0p1 * 63 144584 144522 70.6M c W95 FAT32 (LBA) > /dev/mmcblk0p2 145408 1144831 999424 488M 83 Linux > /dev/mmcblk0p3 1144832 1394687 249856 122M 82 Linux swap / Solaris > /dev/mmcblk0p4 1394688 4128767 2734080 1.3G 83 Linux > > In order to finally get a "working" system, I used Arch[GNU/]Linux's > scripts/u-boot/MLO found at > <http://archlinuxarm.org/platforms/armv7/ti/beagleboard-xm>. I don't > know why, but I couldn't make the Fedora ones work with this setup... > > Anyway, as I said, I'm back to a non-functional system (that, at least, > shows me errors when booting Linux). It is still unable to find my root > file system by LABEL or UUID, and it still shows me *lots* of > errors/warnings when booting Linux. > > My question now is: does Fedora 21 really work on a BeagleBoard-xM rev > C? I'm starting to believe it doesn't (or that my board is somehow > problematic/broken). > > Any more ideas? BTW, the uEnv.txt file that I am using is: > > mmcargs=setenv bootargs console=ttyO2,115200n8 root=LABEL=_/ ro > rootwait cgroup_disable=memory fixrtc earlyprintk > > mmcload=ext2load mmc 0:2 0x80000000 uInitrd-3.17.4-301.fc21.armv7hl; > ext2load mmc 0:2 0x88000000 > dtb-3.17.4-301.fc21.armv7hl/omap3-beagle-xm-ab.dtb; ext2load mmc 0:2 > 0x88080000 vmlinuz-3.17.4-301.fc21.armv7hl > > uenvcmd=run mmcload; run mmcargs; bootz 0x88080000 0x80000000 > 0x88000000 > > And I am not using boot.cmd/boot.scr anymore. > _______________________________________________ arm mailing list arm@xxxxxxxxxxxxxxxxxxxxxxx https://admin.fedoraproject.org/mailman/listinfo/arm
