I would have thought the first .dtb you were using was the correct one for you. I'm surprised the LABEL=_/ option doesn't work. Maybe run blkid and double check the UUID? Can you post the partition table? I only see p1 - p3. > On Mar 1, 2015, at 12:12 AM, Sergio Durigan Junior <sergiodj@xxxxxxxxxxxx> wrote: > >> On Saturday, February 28 2015, Scott M. Jones wrote: >> >> I'm booting F21 LXDE successfully on Beagleboard xM rev B. Different >> DTB but the rest should be the same. Comparing mine to yours you may be >> loading the kernel at the wrong address. I'm not really using the boot.scr. >> >> More info here including my uEnv.txt: >> https://lists.fedoraproject.org/pipermail/arm/2015-January/008901.html > > Thanks for the reply, Scott. Actually, your post was one of the first > ones I saw, and apparently I should have paid more attention to it :-). > > Well, I don't think the problem is loading the Linux kernel at the wrong > address, but rather using the wrong dtb file. I was using > omap3-beagle-xm.dtb, but when I replaced that by omap3-beagle-xm-ab.dtb, > at least I got the kernel to boot. I am not really sure the -ab version > fully works with rev C, but that's the best I've gotten now, apparently. > > *However*, that did not really solve everything for me, because now I am > seeing errors during the boot, and I can't get the boot to complete. > Here's the full log: > > <http://fpaste.org/191874/51860941/> > > The real problem is getting the root right here, I think (although I > also don't think the error messages are good too). I check the UUID of > the partition and it's all good; I also tried using the LABEL=_/ value > in the root= parameter, but it didn't work also. > > Ideas here? Thanks, > > -- > Sergio > GPG key ID: 0x65FC5E36 > Please send encrypted e-mail if possible > http://sergiodj.net/ _______________________________________________ arm mailing list arm@xxxxxxxxxxxxxxxxxxxxxxx https://admin.fedoraproject.org/mailman/listinfo/arm
