On Saturday, February 28 2015, Scott M. Jones wrote: > I'm booting F21 LXDE successfully on Beagleboard xM rev B. Different > DTB but the rest should be the same. Comparing mine to yours you may be > loading the kernel at the wrong address. I'm not really using the boot.scr. > > More info here including my uEnv.txt: > https://lists.fedoraproject.org/pipermail/arm/2015-January/008901.html Thanks for the reply, Scott. Actually, your post was one of the first ones I saw, and apparently I should have paid more attention to it :-). Well, I don't think the problem is loading the Linux kernel at the wrong address, but rather using the wrong dtb file. I was using omap3-beagle-xm.dtb, but when I replaced that by omap3-beagle-xm-ab.dtb, at least I got the kernel to boot. I am not really sure the -ab version fully works with rev C, but that's the best I've gotten now, apparently. *However*, that did not really solve everything for me, because now I am seeing errors during the boot, and I can't get the boot to complete. Here's the full log: <http://fpaste.org/191874/51860941/> The real problem is getting the root right here, I think (although I also don't think the error messages are good too). I check the UUID of the partition and it's all good; I also tried using the LABEL=_/ value in the root= parameter, but it didn't work also. Ideas here? Thanks, -- Sergio GPG key ID: 0x65FC5E36 Please send encrypted e-mail if possible http://sergiodj.net/ _______________________________________________ arm mailing list arm@xxxxxxxxxxxxxxxxxxxxxxx https://admin.fedoraproject.org/mailman/listinfo/arm
