On Sat, Feb 28, 2015 at 11:12 PM, Sergio Durigan Junior <sergiodj@xxxxxxxxxxxx> wrote: > On Saturday, February 28 2015, Scott M. Jones wrote: > >> I'm booting F21 LXDE successfully on Beagleboard xM rev B. Different >> DTB but the rest should be the same. Comparing mine to yours you may be >> loading the kernel at the wrong address. I'm not really using the boot.scr. >> >> More info here including my uEnv.txt: >> https://lists.fedoraproject.org/pipermail/arm/2015-January/008901.html > > Thanks for the reply, Scott. Actually, your post was one of the first > ones I saw, and apparently I should have paid more attention to it :-). > > Well, I don't think the problem is loading the Linux kernel at the wrong > address, but rather using the wrong dtb file. I was using > omap3-beagle-xm.dtb, but when I replaced that by omap3-beagle-xm-ab.dtb, > at least I got the kernel to boot. I am not really sure the -ab version > fully works with rev C, but that's the best I've gotten now, apparently. the "-ab" just inverts the signal enabling the usb hub. https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/arch/arm/boot/dts/omap3-beagle-xm-ab.dts So running the "-ab" on the "c" just disables the usb hub.. Regards, -- Robert Nelson http://www.rcn-ee.com/ _______________________________________________ arm mailing list arm@xxxxxxxxxxxxxxxxxxxxxxx https://admin.fedoraproject.org/mailman/listinfo/arm
