On Mon, Dec 2, 2013 at 10:16 AM, Geert Jansen <geertj@xxxxxxxxx> wrote: > Hi, > > I tried to get F20 booting from the internal eMMC. I did as described below, > but it didn't work. The result is a bricked BBB (I assume I'll be able to > restore it with the 'BBB-EMMC-flasher' image but I haven't tried yet): > > - I installed Fedora to an SD card, and booted from it. > - From within Fedora, I created a VFAT uboot filesystem and an ext4 root > filesystem on the eMMC. > - I copied the contents of /boot/uboot and / to the eMMC. I copied with > 'tar' and made sure permissions, labels, etc are OK. > - Changed the filesystem UUIDs in /etc/fstab on the eMMC. > > When I boot from the eMMC, the only output on the serial console is > "CCCCCCCC". This means you either deleted the MLO/u-boot.img on the boot media, or copied the boot files and renamed.. The omap boot rom, can be pretty picky, I always rm MLO, then copy the new version, then delete u-boot.img and then copy that.. > I can't boot from the SD card anymore either. I gives a bunch of > output, and then hangs on "Starting kernel ...". The latter problem could be > something I messed up myself though, not sure it is related. Could be serial issues, or the wrong u-boot address's.. > > Any ideas what I did wrong? Is there a recommended way to get F20 on the > eMMC? Regards, -- Robert Nelson http://www.rcn-ee.com/ _______________________________________________ arm mailing list arm@xxxxxxxxxxxxxxxxxxxxxxx https://admin.fedoraproject.org/mailman/listinfo/arm
