On Fri, Nov 29, 2013 at 4:27 AM, Peter Robinson <pbrobinson@xxxxxxxxx> wrote: > On Fri, Nov 29, 2013 at 10:19 AM, Richard W.M. Jones <rjones@xxxxxxxxxx> wrote: >> On Thu, Nov 28, 2013 at 10:09:03PM +0100, Jos Vos wrote: >>> I did not have anything connected except RJ45 (I read somewhere USB >>> doesn't work with Fedora, so USB does work for a serial console?), >> >> USB serial connectors certainly do work in Fedora. > > I believe he's referring to using the OTG port on the board as a > serial adapter. In the 3.11.x release that will be GA that > functionality doesn't work. I have all the kernel stuff enabled in > 3.12 but I need to finish hacking up some systemd stuff so that I can > make it work OOTB with the adapter. > > Just to clarify for everyone else here at the moment you need a USB to > TTY serial adapter to plug into the 6 pin header on the BBBlack > motherboard. The USB OTG port doesn't currently work. > > As for the LEDs similarly the reason they don't work is that the > support isn't currently in the Device Tree file. We have all the > required drivers there and I'm looking to make sure this is in place > for the 3.12 kernel as well. The "boot" LED's are utilized in Angstrom/Ubuntu/Debian via u-boot, purely for end user debugging.. https://github.com/RobertCNelson/Bootloader-Builder/blob/master/patches/v2013.10/0001-am335x_evm-uEnv.txt-bootz-n-fixes.patch#L121 not upstream.. Regards, -- Robert Nelson http://www.rcn-ee.com/ _______________________________________________ arm mailing list arm@xxxxxxxxxxxxxxxxxxxxxxx https://admin.fedoraproject.org/mailman/listinfo/arm
