> I tried to get F20 booting from the internal eMMC. I did as described below, > but it didn't work. The result is a bricked BBB (I assume I'll be able to > restore it with the 'BBB-EMMC-flasher' image but I haven't tried yet): > > - I installed Fedora to an SD card, and booted from it. > - From within Fedora, I created a VFAT uboot filesystem and an ext4 root > filesystem on the eMMC. > - I copied the contents of /boot/uboot and / to the eMMC. I copied with > 'tar' and made sure permissions, labels, etc are OK. > - Changed the filesystem UUIDs in /etc/fstab on the eMMC. > > When I boot from the eMMC, the only output on the serial console is > "CCCCCCCC". I can't boot from the SD card anymore either. I gives a bunch of > output, and then hangs on "Starting kernel ...". The latter problem could be > something I messed up myself though, not sure it is related. > > Any ideas what I did wrong? Is there a recommended way to get F20 on the > eMMC? The latest release of our uboot should fix this problem. I would also have a tendency to copy the image file onto the SD card and then dd/xzcat it directly onto the eMMC. Peter _______________________________________________ arm mailing list arm@xxxxxxxxxxxxxxxxxxxxxxx https://admin.fedoraproject.org/mailman/listinfo/arm
