hello
I go back on my problem with the interace Komplete audio 6 from Native Instruments.
in short the problem is with the snd-usb-audio driver that I don't have any device capture control and some strange device output.
The release of my card is :
Bus 004 Device 003: ID 17cc:1001 Native Instruments
I see that in the source alsa the same device is : 17cc:1000 (note the one end differs)
I supposed that the functionnality is not complete because of the id product is not the same.
So I edit the source of sound/usb and change the idproduct 1000 to 1001 where I find it then I compile a new kernel wtih a new module snd-usb-audio from the linux-source of the distribution (ubuntu)
No luck , it's not so simple : even if the driver loads, the card doesn't. Probably the one say that something has changing in the card.
The error message is :
[ 3.897212] usb 4-1.2: new high-speed USB device number 3 using ehci-pci
[ 3.990359] usb 4-1.2: New USB device found, idVendor=17cc, idProduct=1001
[ 3.990363] usb 4-1.2: New USB device strings: Mfr=12, Product=7, SerialNumber=13
[ 3.990364] usb 4-1.2: Product: Komplete Audio 6
[ 3.990366] usb 4-1.2: Manufacturer: Native Instruments
[ 3.990367] usb 4-1.2: SerialNumber: 5F9192A1
[ 17.070590] usb 4-1.2: reset high-speed USB device number 3 using ehci-pci
[ 17.162692] snd-usb-audio: probe of 4-1.2:1.0 failed with error -11
[ ...]i
I don't know what to do else.
Any help will be welcome.
thanks,
2015-05-18 18:04 GMT+02:00 jean-noël chardron <rondrach@xxxxxxxxx>:
to say a little more the result of -L aplay is in the file ALSA-KA6.txtand below the description of the inputs and outputs of the KA6 :Input :- 1 and 2 : Line and microphone (XLR or Jack 6.35)- MIDI in- 3 and 4 : Jack 6.35 for devices or instruments without phantom power- output 5 : digital input (RCA S/PDIF)Output :- 1 and 2 (main) Jack 6.35- MIDI Out- 3 and 4 (additional) jack 6.35 - always at 0dB- Output 6 : digital output (RCA S/PDIF)an USB port and a headphone socket2015-05-18 17:27 GMT+02:00 jean-noël chardron <rondrach@xxxxxxxxx>:
Please show the output of "lsusb -v -d 17cc:1000".
Regards,
Clemens
hello,can I squat on this thread because I bought the same card last week?the strange affair for me is that the system doesn't show the same behavior when I turn on the computer with the card or when i plug the card once the computer is running. anyway it shows some trouble with surround 7.1, 5.1, and analog 2.1of course there is no surrond in the card, I believe.just main and secondary entry and output with 2 channels.The output of "lsusb -v -d 17cc:1001" (not 1000) is in the file
------------------------------------------------------------------------------ One dashboard for servers and applications across Physical-Virtual-Cloud Widest out-of-the-box monitoring support with 50+ applications Performance metrics, stats and reports that give you Actionable Insights Deep dive visibility with transaction tracing using APM Insight. http://ad.doubleclick.net/ddm/clk/290420510;117567292;y
_______________________________________________ Alsa-user mailing list Alsa-user@xxxxxxxxxxxxxxxxxxxxx https://lists.sourceforge.net/lists/listinfo/alsa-user
