Am Mittwoch, den 13.04.2011, 13:37 +0100 schrieb Tom Cook: > Hi, > > I'm new to this list, or at least it's been many years since I was > last here. > > I'm trying to get an RME Digi96 digital interface card working under > Ubuntu 10.10. This is not the Digi96/8 or later variants, but the > original Digi96. It has PCI ID 10ee 3fc0. Reading the unofficial > ALSA wiki, it seems that the card should present two devices, device 0 > being the 2-channel S/PDIF interface and device 1 being the 8-channel > optical interface, but I only see one: > > $ aplay -l > **** List of PLAYBACK Hardware Devices **** > card 0: Intel [HDA Intel], device 0: ALC662 rev1 Analog [ALC662 rev1 > Analog] > Subdevices: 1/1 > Subdevice #0: subdevice #0 > card 0: Intel [HDA Intel], device 1: ALC662 rev1 Digital [ALC662 rev1 > Digital] > Subdevices: 1/1 > Subdevice #0: subdevice #0 > card 2: Digi96 [RME Digi96], device 0: Digi96 IEC958 [Digi96 IEC958] > Subdevices: 1/1 > Subdevice #0: subdevice #0 > > Note that card 1 doesn't show up here because it is capture-only (a > webcam). Using alsamixer, I can switch the input connector to > 'Optical' but this doesn't help to get a second device out of it. I > can only open device 0 as a 2-in 2-out duplex, not the 8-in 8-out > duplex that should be available. > > I'm trying to connect it to a Behringer ADA8000 via ADAT (yes, the > cables are connected the right way around!) I've tried both setting > the ADA8000 as the clock master at both 44100 and 48000Hz, with the > Digi96 set to AutoSync, and also with the Digi96 set to use its > internal clock with the ADA8000 set to slave to the ADAT input, but > neither seems to make any difference. > > Does anyone have any pointers on how to get this working? > > Thanks, > Tom hi tom, it should be possible to change the input-connection with alsamixer: via the input connection switch, from coaxial to optical. hope it will help Martin ------------------------------------------------------------------------------ Benefiting from Server Virtualization: Beyond Initial Workload Consolidation -- Increasing the use of server virtualization is a top priority.Virtualization can reduce costs, simplify management, and improve application availability and disaster protection. Learn more about boosting the value of server virtualization. http://p.sf.net/sfu/vmware-sfdev2dev _______________________________________________ Alsa-user mailing list Alsa-user@xxxxxxxxxxxxxxxxxxxxx https://lists.sourceforge.net/lists/listinfo/alsa-user
