Hi, on my MSI U100 with: Debian 5.0.3 kernel 2.6.34.1 (ALSA Driver Version 1.0.22.1) BIOS 10G (the lastone) module snd-hda-intel load default codec model alc1200 but I tried model=3stack,targa-dig,targa-2ch-dig without good results. I have very poor quality in front-mic (internal-lcd) recording. When I record with audacity (or with other programs and after edit records) I observ following facts: test 1 Mixer front-mic=100% front-mic-boost=100% capture=100% record result wave form with DC component at -1 (audacity level) so quality is very bad, voice is cuted on negative half of the wave. test 2 Mixer front-mic=100% front-mic-boost=100% capture=75% record result wave form with DC component at -0.75 (audacity level) so quality is quite good until voice level is low. Record level decreased by capture at 75% test 3 Mixer front-mic=100% front-mic-boost=100% capture=0% record result wave form with DC component at 0 (no DC component) with little noise, no voice because capture at 0% Thank you! P.S. I don't speak english ------------------------------------------------------------------------------ This SF.net email is sponsored by Sprint What will you do first with EVO, the first 4G phone? Visit sprint.com/first -- http://p.sf.net/sfu/sprint-com-first _______________________________________________ Alsa-user mailing list Alsa-user@xxxxxxxxxxxxxxxxxxxxx https://lists.sourceforge.net/lists/listinfo/alsa-user
