lars.bjorndal@xxxxxxxxxxxx (Lars Bjørndal) writes: > Jaroslav Kysela <perex@xxxxxxxx> writes: > >> On Mon, 22 Mar 2010, Lars Bjørndal wrote: >> >>> Jaroslav Kysela <perex@xxxxxxxx> writes: >>> >>>> On Mon, 22 Mar 2010, Lars Bjørndal wrote: >>>> >>>>> kionez <kionez@xxxxxxxxx> writes: >>>>> >>>>>> #include <Jaroslav Kysela.h> // created 24/02/2010 11:33 >>>>>> >>>>>>> It seems that your codec is not properly initialized. Try hda-analyzer >>>>>>> or other tool to set directly HDA codec widgets and try to find which >>>>>>> widget controls the analog beep (assuming you're using beep_mode=0 in >>>>>>> the latest ALSA driver). >>>>>> >>>>>> i play a little with hda-analyzer and the last kernel (2.6.33-gentoo), >>>>>> but i can't get the beep working, if i use a kernel > 2.6.29 every >>>>>> analog beeps disappears (as reported) and i lose the firmware beeps >>>>>> (i.e.: when the power chord is detached). >>>>>> >>>>>> is there's something to know about widgets in HDA codec? i try to see if >>>>>> there's something beep related in every node, but i can't find anything >>>>>> useful. >>>>> >>>>> What changed between 2.6.29 and 2.6.30 that could break console and >>>>> firmware beep? On some other systems, I did need to switch from pcspkr >>>>> module and instead load snd-pcsp. This does not help on the Lenovo X61S >>>>> machine. Is there other modules to try? >>>> >>>> Have you tried beep_mode=0 with recent drivers? Or disable >>>> SND_HDA_INPUT_BEEP with previous kernels. >>> >>> I'm not sure if I do things right: I use kernel >>> 2.6.32.9-70.fc12.i686.PAE. Tried putting the following in >> >> The beep_mode option is not in this kernel. You may compile own kernel >> with CONFIG_SND_HDA_INPUT_BEEP disabled or try to compile latest ALSA >> snapshot: >> >> http://www.alsa-project.org/main/index.php/Driver_Compilation > > I followed the steps, and was able to compile and install the new kernel > modules. I tried beep_mode=0 as well as beep_mode=1, nothing gives me > console beep. Other suggestions? Replying to myself. Actually, I got console beep working. I had to do 'rmmod pcspkr', and I did need to NOT have the line 'options snd-hda-intel beep_mode=0' in the modprobe config file. The firmware beep, e.g. the beep you get when removing or inserting the power cable, doesn't work. The real problem here is that you miss the "low battery" warning beep. Lars ------------------------------------------------------------------------------ Download Intel® Parallel Studio Eval Try the new software tools for yourself. Speed compiling, find bugs proactively, and fine-tune applications for parallel performance. See why Intel Parallel Studio got high marks during beta. http://p.sf.net/sfu/intel-sw-dev _______________________________________________ Alsa-user mailing list Alsa-user@xxxxxxxxxxxxxxxxxxxxx https://lists.sourceforge.net/lists/listinfo/alsa-user
