Just found the alsa-info.sh script. Output available here: http://www.alsa-project.org/db/?f=93df3cba46481fe60af3b6ef73bf068cfa302ef8 ..Matt On Tue, Jul 7, 2009 at 9:37 PM, Matt Snow<drama@xxxxxxxxxx> wrote: > Hey Alsa-Users list, > I have been trying to get help via the distro forums for KnoppMyth(Now > LinHES) but i'm not having much luck there. Forgive me for the forum > copy & paste, but i'm really hoping there is something simple I can do > like recompile the kernel to get this working. Copying the ubuntu > kernel config is going to be my next attempt and comparing kernel > version/patches but figured I would throw the problem here before I > invest more time in this. > Please point out any thing I might be missing. I have not spent any > serious time with linux audio since the Sound blaster 16 was hot. > > I have a Asus Xonar DX sound card that was working perfectly in > KnoppMyth/LinHES R5.5(Knoppix/debian based) after manually compiling > alsa-driver 1.0.18b and 1.0.18 libs/utils/etc. > After upgrading to KnoppMyth/LinHES R6(ArchLinux), the analog out > plays audio perfectly through head phones or powered speakers, but the > 3.5mm stereo-to-RCA cable going to RCA input on the TV doesn't produce > any sound at all. > I do realize that there are going to be significant differences > between Linux distributions, but the guys driving the development of > the distro have kept as much the same as possible without re-inventing > the wheel > > Turning the TV volume up to 70+ doesn't make a difference, alsamixer > settings are all set to 100. Muting the digital, aux, front-port, and > mic-in channels have zero effect on the audio to the tv(no audio), or > headphones(always work). > > I've tested with speaker-test, aplay, mplayer, and mythtv with and > without VDPAU enabled binarys. > > Without changing any configuration or BIOS setting, booting ubuntu 9 > i386 liveCD all audio tests work as expected on TV without any > modifications. very strange! > > I mirrored the alsamixer settings from Ubuntu LiveCD exactly as well > and it still doesn't work! > > I've tried compiling alsa 1.0.20(drivers,lib,utils,oss) per the alsa > instructions here-> > http://www.alsa-project.org/main/index.php/Matrix:Module-oxygen and I > get the same result. > > I have tried many alsamixer combination's with & with-out IEC958, > Line-In, Front Panel muted/un-muted. nothing will get the audio to > output to the TV, but ALWAYS will play to an external PC speaker( > Altec Lansing SoundBar ) or my ipod headphones. > > Here is some (hopefully useful) command output that might allow > someone to help me cause i'm at a loss right now. > > dmesg > [root@SnowTV ~]# dmesg > BIOS EBDA/lowmem at: 0009dc00/0009dc00 > Linux version 2.6.28-LinHES (root@myhost) (gcc version 4.3.2 (GCC) ) > #1 SMP PREEMPT Sat Feb 14 12:09:54 UTC 2009 > KERNEL supported cpus: > Intel GenuineIntel > AMD AuthenticAMD > NSC Geode by NSC > Cyrix CyrixInstead > Centaur CentaurHauls > Transmeta GenuineTMx86 > Transmeta TransmetaCPU > UMC UMC UMC UMC > BIOS-provided physical RAM map: > BIOS-e820: 0000000000000000 - 000000000009dc00 (usable) > BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved) > BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) > BIOS-e820: 0000000000100000 - 000000007ffa0000 (usable) > BIOS-e820: 000000007ffa0000 - 000000007ffae000 (ACPI data) > BIOS-e820: 000000007ffae000 - 000000007fff0000 (ACPI NVS) > BIOS-e820: 000000007fff0000 - 0000000080000000 (reserved) > BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) > BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) > DMI present. > AMI BIOS detected: BIOS may corrupt low RAM, working it around. > last_pfn = 0x7ffa0 max_arch_pfn = 0x100000 > x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 > Scanning 0 areas for low memory corruption > modified physical RAM map: > modified: 0000000000000000 - 0000000000010000 (reserved) > modified: 0000000000010000 - 000000000009dc00 (usable) > modified: 000000000009dc00 - 00000000000a0000 (reserved) > modified: 00000000000e0000 - 0000000000100000 (reserved) > modified: 0000000000100000 - 000000007ffa0000 (usable) > modified: 000000007ffa0000 - 000000007ffae000 (ACPI data) > modified: 000000007ffae000 - 000000007fff0000 (ACPI NVS) > modified: 000000007fff0000 - 0000000080000000 (reserved) > modified: 00000000fee00000 - 00000000fee01000 (reserved) > modified: 00000000ffb00000 - 0000000100000000 (reserved) > kernel direct mapping tables up to 377fe000 @ 10000-16000 > RAMDISK: 7fdf3000 - 7ff8f4b4 > Allocated new RAMDISK: 0055f000 - 006fb4b4 > Move RAMDISK from 000000007fdf3000 - 000000007ff8f4b3 to 0055f000 - 006fb4b3 > ACPI: RSDP 000F9380, 0014 (r0 ACPIAM) > ACPI: RSDT 7FFA0000, 003C (r1 041907 RSDT1450 20070419 MSFT 97) > ACPI: FACP 7FFA0200, 0084 (r2 041907 FACP1450 20070419 MSFT 97) > ACPI: DSDT 7FFA0440, 5B43 (r1 1AAAA 1AAAA000 0 INTL 20051117) > ACPI: FACS 7FFAE000, 0040 > ACPI: APIC 7FFA0390, 006C (r1 041907 APIC1450 20070419 MSFT 97) > ACPI: MCFG 7FFA0400, 003C (r1 041907 OEMMCFG 20070419 MSFT 97) > ACPI: OEMB 7FFAE040, 0061 (r1 041907 OEMB1450 20070419 MSFT 97) > ACPI: ASF! 7FFA5F90, 0099 (r32 LEGEND I865PASF 1 INTL 20051117) > ACPI: GSCI 7FFAE0B0, 2024 (r1 041907 GMCHSCI 20070419 MSFT 97) > ACPI: Local APIC address 0xfee00000 > 1159MB HIGHMEM available. > 887MB LOWMEM available. > mapped low ram: 0 - 377fe000 > low ram: 00000000 - 377fe000 > bootmap 00012000 - 00018f00 > (9 early reservations) ==> bootmem [0000000000 - 00377fe000] > #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] > #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] > #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] > #3 [0000100000 - 000055b520] TEXT DATA BSS ==> [0000100000 - 000055b520] > #4 [000055c000 - 000055f000] INIT_PG_TABLE ==> [000055c000 - 000055f000] > #5 [000009dc00 - 0000100000] BIOS reserved ==> [000009dc00 - 0000100000] > #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000] > #7 [000055f000 - 00006fb4b4] NEW RAMDISK ==> [000055f000 - 00006fb4b4] > #8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000] > found SMP MP-table at [c00ff780] 000ff780 > Zone PFN ranges: > DMA 0x00000010 -> 0x00001000 > Normal 0x00001000 -> 0x000377fe > HighMem 0x000377fe -> 0x0007ffa0 > Movable zone start PFN for each node > early_node_map[2] active PFN ranges > 0: 0x00000010 -> 0x0000009d > 0: 0x00000100 -> 0x0007ffa0 > On node 0 totalpages: 524077 > free_area_init_node: node 0, pgdat c0407780, node_mem_map c1000200 > DMA zone: 32 pages used for memmap > DMA zone: 0 pages reserved > DMA zone: 3949 pages, LIFO batch:0 > Normal zone: 1744 pages used for memmap > Normal zone: 221486 pages, LIFO batch:31 > HighMem zone: 2320 pages used for memmap > HighMem zone: 294546 pages, LIFO batch:31 > Movable zone: 0 pages used for memmap > ACPI: PM-Timer IO Port: 0x808 > ACPI: Local APIC address 0xfee00000 > ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) > ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) > ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) > ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) > ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) > IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) > ACPI: IRQ0 used by override. > ACPI: IRQ2 used by override. > ACPI: IRQ9 used by override. > Enabling APIC mode: Flat. Using 1 I/O APICs > Using ACPI (MADT) for SMP configuration information > SMP: Allowing 4 CPUs, 2 hotplug CPUs > PM: Registered nosave memory: 000000000009d000 - 000000000009e000 > PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 > PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 > PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 > Allocating PCI resources starting at 88000000 (gap: 80000000:7ee00000) > PERCPU: Allocating 36864 bytes of per cpu data > NR_CPUS: 16, nr_cpu_ids: 4, nr_node_ids 1 > Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519981 > Kernel command line: > root=/dev/disk/by-uuid/445d1e75-1437-45df-8382-f63bb81acfaa ro > init=/sbin/runit quiet vga=0x314 splash=silent,theme:linhes > console=tty1 > Enabling fast FPU save and restore... done. > Enabling unmasked SIMD FPU exception support... done. > Initializing CPU#0 > PID hash table entries: 4096 (order: 12, 16384 bytes) > Fast TSC calibration using PIT > Detected 2493.822 MHz processor. > Console: colour dummy device 80x25 > console [tty1] enabled > Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) > Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) > Scanning for low memory corruption every 60 seconds > Memory: 2071964k/2096768k available (2235k kernel code, 23516k > reserved, 1023k data, 324k init, 1187464k highmem) > virtual kernel memory layout: > fixmap : 0xffee8000 - 0xfffff000 (1116 kB) > pkmap : 0xff800000 - 0xffc00000 (4096 kB) > vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) > lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) > .init : 0xc0435000 - 0xc0486000 ( 324 kB) > .data : 0xc032ec9e - 0xc042eb5c (1023 kB) > .text : 0xc0100000 - 0xc032ec9e (2235 kB) > Checking if this processor honours the WP bit even in supervisor mode...Ok. > SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 > Calibrating delay loop (skipped), value calculated using timer > frequency.. 4989.46 BogoMIPS (lpj=8312740) > Security Framework initialized > Mount-cache hash table entries: 512 > CPU: L1 I cache: 32K, L1 D cache: 32K > CPU: L2 cache: 2048K > CPU: Physical Processor ID: 0 > CPU: Processor Core ID: 0 > Intel machine check architecture supported. > Intel machine check reporting enabled on CPU#0. > using mwait in idle threads. > Checking 'hlt' instruction... OK. > ACPI: Core revision 20080926 > ACPI: Checking initramfs for custom DSDT > ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 > CPU0: Intel Pentium(R) Dual-Core CPU E5200 @ 2.50GHz stepping 06 > Booting processor 1 APIC 0x1 ip 0x6000 > Initializing CPU#1 > Calibrating delay using timer specific routine.. 4989.94 BogoMIPS (lpj=8311916) > CPU: L1 I cache: 32K, L1 D cache: 32K > CPU: L2 cache: 2048K > CPU: Physical Processor ID: 0 > CPU: Processor Core ID: 1 > Intel machine check architecture supported. > Intel machine check reporting enabled on CPU#1. > x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 > CPU1: Intel Pentium(R) Dual-Core CPU E5200 @ 2.50GHz stepping 06 > checking TSC synchronization [CPU#0 -> CPU#1]: passed. > Brought up 2 CPUs > Total of 2 processors activated (9978.41 BogoMIPS). > net_namespace: 768 bytes > Booting paravirtualized kernel on bare hardware > NET: Registered protocol family 16 > ACPI: bus type pci registered > PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 > PCI: Not using MMCONFIG. > PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=9 > PCI: Using configuration type 1 for base access > ACPI: EC: Look up EC in DSDT > ACPI: Interpreter enabled > ACPI: (supports S0 S1 S3 S4 S5) > ACPI: Using IOAPIC for interrupt routing > PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 > PCI: MCFG area at e0000000 reserved in ACPI motherboard resources > PCI: Using MMCONFIG for extended config space > ACPI: No dock devices found. > ACPI: PCI Root Bridge [PCI0] (0000:00) > pci 0000:00:01.0: PME# supported from D0 D3hot D3cold > pci 0000:00:01.0: PME# disabled > pci 0000:00:1a.0: reg 20 io port: [0xe000-0xe01f] > pci 0000:00:1a.1: reg 20 io port: [0xdc00-0xdc1f] > pci 0000:00:1a.7: reg 10 32bit mmio: [0xfebffc00-0xfebfffff] > pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold > pci 0000:00:1a.7: PME# disabled > pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold > pci 0000:00:1c.0: PME# disabled > pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold > pci 0000:00:1c.1: PME# disabled > pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold > pci 0000:00:1c.2: PME# disabled > pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold > pci 0000:00:1c.3: PME# disabled > pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold > pci 0000:00:1c.4: PME# disabled > pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold > pci 0000:00:1c.5: PME# disabled > pci 0000:00:1d.0: reg 20 io port: [0xd880-0xd89f] > pci 0000:00:1d.1: reg 20 io port: [0xd800-0xd81f] > pci 0000:00:1d.2: reg 20 io port: [0xd480-0xd49f] > pci 0000:00:1d.3: reg 20 io port: [0xd400-0xd41f] > pci 0000:00:1d.7: reg 10 32bit mmio: [0xfebff800-0xfebffbff] > pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold > pci 0000:00:1d.7: PME# disabled > pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO > pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO > pci 0000:00:1f.2: reg 10 io port: [0xec00-0xec07] > pci 0000:00:1f.2: reg 14 io port: [0xe880-0xe883] > pci 0000:00:1f.2: reg 18 io port: [0xe800-0xe807] > pci 0000:00:1f.2: reg 1c io port: [0xe480-0xe483] > pci 0000:00:1f.2: reg 20 io port: [0xe400-0xe40f] > pci 0000:00:1f.2: reg 24 io port: [0xe080-0xe08f] > pci 0000:00:1f.3: reg 10 64bit mmio: [0xfebff400-0xfebff4ff] > pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f] > pci 0000:00:1f.5: reg 10 io port: [0xd000-0xd007] > pci 0000:00:1f.5: reg 14 io port: [0xcc00-0xcc03] > pci 0000:00:1f.5: reg 18 io port: [0xc880-0xc887] > pci 0000:00:1f.5: reg 1c io port: [0xc800-0xc803] > pci 0000:00:1f.5: reg 20 io port: [0xc480-0xc48f] > pci 0000:00:1f.5: reg 24 io port: [0xc400-0xc40f] > pci 0000:01:00.0: reg 10 32bit mmio: [0xfd000000-0xfdffffff] > pci 0000:01:00.0: reg 14 64bit mmio: [0xc0000000-0xcfffffff] > pci 0000:01:00.0: reg 1c 64bit mmio: [0xfa000000-0xfbffffff] > pci 0000:01:00.0: reg 24 io port: [0x9c00-0x9c7f] > pci 0000:01:00.0: reg 30 32bit mmio: [0xfe9e0000-0xfe9fffff] > pci 0000:00:01.0: bridge io port: [0x9000-0x9fff] > pci 0000:00:01.0: bridge 32bit mmio: [0xf8900000-0xfe9fffff] > pci 0000:00:01.0: bridge 64bit mmio pref: [0xb7f00000-0xd7efffff] > pci 0000:00:1c.3: bridge io port: [0xa000-0xafff] > pci 0000:06:04.0: reg 10 io port: [0xa800-0xa8ff] > pci 0000:06:04.0: supports D1 D2 > pci 0000:05:00.0: bridge io port: [0xa000-0xafff] > pci 0000:08:00.0: reg 10 io port: [0xb800-0xb8ff] > pci 0000:08:00.0: reg 18 64bit mmio: [0xfeaff000-0xfeafffff] > pci 0000:08:00.0: reg 30 32bit mmio: [0xfeac0000-0xfeadffff] > pci 0000:08:00.0: supports D1 D2 > pci 0000:08:00.0: PME# supported from D1 D2 D3hot D3cold > pci 0000:08:00.0: PME# disabled > pci 0000:00:1c.5: bridge io port: [0xb000-0xbfff] > pci 0000:00:1c.5: bridge 32bit mmio: [0xfea00000-0xfeafffff] > pci 0000:09:01.0: reg 10 32bit mmio: [0xd8000000-0xdbffffff] > pci 0000:00:1e.0: transparent bridge > pci 0000:00:1e.0: bridge 64bit mmio pref: [0xd7f00000-0xdfefffff] > bus 00 -> node 0 > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT] > ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15) > ACPI: PCI Interrupt Link [LNKB] (IRQs *5) > ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12 14 15) > ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12 14 *15) > ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 *7 10 11 12 14 15) > ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 *14 15) > ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled. > ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 6 7 10 11 12 14 15) > PCI: Using ACPI for IRQ routing > NetLabel: Initializing > NetLabel: domain hash size = 128 > NetLabel: protocols = UNLABELED CIPSOv4 > NetLabel: unlabeled traffic allowed by default > pnp: PnP ACPI init > ACPI: bus type pnp registered > pnp: PnP ACPI: found 13 devices > ACPI: ACPI bus type pnp unregistered > system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved > system 00:06: ioport range 0xa00-0xa0f has been reserved > system 00:06: ioport range 0xa10-0xa1f has been reserved > system 00:06: ioport range 0xa20-0xa2f has been reserved > system 00:06: ioport range 0xa30-0xa3f has been reserved > system 00:07: ioport range 0x4d0-0x4d1 has been reserved > system 00:07: ioport range 0x800-0x87f has been reserved > system 00:07: ioport range 0x480-0x4bf has been reserved > system 00:07: iomem range 0xfed1c000-0xfed1ffff has been reserved > system 00:07: iomem range 0xfed20000-0xfed8ffff has been reserved > system 00:09: iomem range 0xffc00000-0xffefffff has been reserved > system 00:0a: iomem range 0xfec00000-0xfec00fff has been reserved > system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved > system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved > system 00:0c: iomem range 0x0-0x9ffff could not be reserved > system 00:0c: iomem range 0xc0000-0xcffff could not be reserved > system 00:0c: iomem range 0xe0000-0xfffff could not be reserved > system 00:0c: iomem range 0x100000-0x7fffffff could not be reserved > pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 > pci 0000:00:01.0: IO window: 0x9000-0x9fff > pci 0000:00:01.0: MEM window: 0xf8900000-0xfe9fffff > pci 0000:00:01.0: PREFETCH window: 0x000000b7f00000-0x000000d7efffff > pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 > pci 0000:00:1c.0: IO window: disabled > pci 0000:00:1c.0: MEM window: disabled > pci 0000:00:1c.0: PREFETCH window: disabled > pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03 > pci 0000:00:1c.1: IO window: disabled > pci 0000:00:1c.1: MEM window: disabled > pci 0000:00:1c.1: PREFETCH window: disabled > pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04 > pci 0000:00:1c.2: IO window: disabled > pci 0000:00:1c.2: MEM window: disabled > pci 0000:00:1c.2: PREFETCH window: disabled > pci 0000:05:00.0: PCI bridge, secondary bus 0000:06 > pci 0000:05:00.0: IO window: 0xa000-0xafff > pci 0000:05:00.0: MEM window: disabled > pci 0000:05:00.0: PREFETCH window: disabled > pci 0000:00:1c.3: PCI bridge, secondary bus 0000:05 > pci 0000:00:1c.3: IO window: 0xa000-0xafff > pci 0000:00:1c.3: MEM window: disabled > pci 0000:00:1c.3: PREFETCH window: disabled > pci 0000:00:1c.4: PCI bridge, secondary bus 0000:07 > pci 0000:00:1c.4: IO window: disabled > pci 0000:00:1c.4: MEM window: disabled > pci 0000:00:1c.4: PREFETCH window: disabled > pci 0000:00:1c.5: PCI bridge, secondary bus 0000:08 > pci 0000:00:1c.5: IO window: 0xb000-0xbfff > pci 0000:00:1c.5: MEM window: 0xfea00000-0xfeafffff > pci 0000:00:1c.5: PREFETCH window: disabled > pci 0000:00:1e.0: PCI bridge, secondary bus 0000:09 > pci 0000:00:1e.0: IO window: disabled > pci 0000:00:1e.0: MEM window: disabled > pci 0000:00:1e.0: PREFETCH window: 0x000000d7f00000-0x000000dfefffff > pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > pci 0000:00:01.0: setting latency timer to 64 > pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 > pci 0000:00:1c.0: setting latency timer to 64 > pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 > pci 0000:00:1c.1: setting latency timer to 64 > pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 > pci 0000:00:1c.2: setting latency timer to 64 > pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 > pci 0000:00:1c.3: setting latency timer to 64 > pci 0000:05:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 > pci 0000:05:00.0: setting latency timer to 64 > pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17 > pci 0000:00:1c.4: setting latency timer to 64 > pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16 > pci 0000:00:1c.5: setting latency timer to 64 > pci 0000:00:1e.0: setting latency timer to 64 > bus: 00 index 0 io port: [0x00-0xffff] > bus: 00 index 1 mmio: [0x000000-0xffffffff] > bus: 01 index 0 io port: [0x9000-0x9fff] > bus: 01 index 1 mmio: [0xf8900000-0xfe9fffff] > bus: 01 index 2 mmio: [0xb7f00000-0xd7efffff] > bus: 01 index 3 mmio: [0x0-0x0] > bus: 02 index 0 mmio: [0x0-0x0] > bus: 02 index 1 mmio: [0x0-0x0] > bus: 02 index 2 mmio: [0x0-0x0] > bus: 02 index 3 mmio: [0x0-0x0] > bus: 03 index 0 mmio: [0x0-0x0] > bus: 03 index 1 mmio: [0x0-0x0] > bus: 03 index 2 mmio: [0x0-0x0] > bus: 03 index 3 mmio: [0x0-0x0] > bus: 04 index 0 mmio: [0x0-0x0] > bus: 04 index 1 mmio: [0x0-0x0] > bus: 04 index 2 mmio: [0x0-0x0] > bus: 04 index 3 mmio: [0x0-0x0] > bus: 05 index 0 io port: [0xa000-0xafff] > bus: 05 index 1 mmio: [0x0-0x0] > bus: 05 index 2 mmio: [0x0-0x0] > bus: 05 index 3 mmio: [0x0-0x0] > bus: 06 index 0 io port: [0xa000-0xafff] > bus: 06 index 1 mmio: [0x0-0x0] > bus: 06 index 2 mmio: [0x0-0x0] > bus: 06 index 3 mmio: [0x0-0x0] > bus: 07 index 0 mmio: [0x0-0x0] > bus: 07 index 1 mmio: [0x0-0x0] > bus: 07 index 2 mmio: [0x0-0x0] > bus: 07 index 3 mmio: [0x0-0x0] > bus: 08 index 0 io port: [0xb000-0xbfff] > bus: 08 index 1 mmio: [0xfea00000-0xfeafffff] > bus: 08 index 2 mmio: [0x0-0x0] > bus: 08 index 3 mmio: [0x0-0x0] > bus: 09 index 0 mmio: [0x0-0x0] > bus: 09 index 1 mmio: [0x0-0x0] > bus: 09 index 2 mmio: [0xd7f00000-0xdfefffff] > bus: 09 index 3 io port: [0x00-0xffff] > bus: 09 index 4 mmio: [0x000000-0xffffffff] > NET: Registered protocol family 2 > IP route cache hash table entries: 32768 (order: 5, 131072 bytes) > TCP established hash table entries: 131072 (order: 8, 1048576 bytes) > TCP bind hash table entries: 65536 (order: 7, 524288 bytes) > TCP: Hash tables configured (established 131072 bind 65536) > TCP reno registered > NET: Registered protocol family 1 > Unpacking initramfs... done > Freeing initrd memory: 1649k freed > apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) > apm: disabled - APM is not SMP safe. > highmem bounce pool size: 64 pages > VFS: Disk quotas dquot_6.5.1 > Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) > msgmni has been set to 1732 > alg: No test for stdrng (krng) > Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) > io scheduler noop registered > io scheduler anticipatory registered > io scheduler deadline registered > io scheduler cfq registered (default) > pci 0000:01:00.0: Boot video device > pcieport-driver 0000:00:01.0: setting latency timer to 64 > pcieport-driver 0000:00:01.0: found MSI capability > pcieport-driver 0000:00:01.0: irq 767 for MSI/MSI-X > pci_express 0000:00:01.0:pcie00: allocate port service > pci_express 0000:00:01.0:pcie03: allocate port service > pcieport-driver 0000:00:1c.0: setting latency timer to 64 > pcieport-driver 0000:00:1c.0: found MSI capability > pcieport-driver 0000:00:1c.0: irq 766 for MSI/MSI-X > pci_express 0000:00:1c.0:pcie00: allocate port service > pci_express 0000:00:1c.0:pcie02: allocate port service > pci_express 0000:00:1c.0:pcie03: allocate port service > pcieport-driver 0000:00:1c.1: setting latency timer to 64 > pcieport-driver 0000:00:1c.1: found MSI capability > pcieport-driver 0000:00:1c.1: irq 765 for MSI/MSI-X > pci_express 0000:00:1c.1:pcie00: allocate port service > pci_express 0000:00:1c.1:pcie02: allocate port service > pci_express 0000:00:1c.1:pcie03: allocate port service > pcieport-driver 0000:00:1c.2: setting latency timer to 64 > pcieport-driver 0000:00:1c.2: found MSI capability > pcieport-driver 0000:00:1c.2: irq 764 for MSI/MSI-X > pci_express 0000:00:1c.2:pcie00: allocate port service > pci_express 0000:00:1c.2:pcie02: allocate port service > pci_express 0000:00:1c.2:pcie03: allocate port service > pcieport-driver 0000:00:1c.3: setting latency timer to 64 > pcieport-driver 0000:00:1c.3: found MSI capability > pcieport-driver 0000:00:1c.3: irq 763 for MSI/MSI-X > pci_express 0000:00:1c.3:pcie00: allocate port service > pci_express 0000:00:1c.3:pcie02: allocate port service > pci_express 0000:00:1c.3:pcie03: allocate port service > pcieport-driver 0000:00:1c.4: setting latency timer to 64 > pcieport-driver 0000:00:1c.4: found MSI capability > pcieport-driver 0000:00:1c.4: irq 762 for MSI/MSI-X > pci_express 0000:00:1c.4:pcie00: allocate port service > pci_express 0000:00:1c.4:pcie02: allocate port service > pci_express 0000:00:1c.4:pcie03: allocate port service > pcieport-driver 0000:00:1c.5: setting latency timer to 64 > pcieport-driver 0000:00:1c.5: found MSI capability > pcieport-driver 0000:00:1c.5: irq 761 for MSI/MSI-X > pci_express 0000:00:1c.5:pcie00: allocate port service > pci_express 0000:00:1c.5:pcie02: allocate port service > pci_express 0000:00:1c.5:pcie03: allocate port service > vesafb: framebuffer at 0xfb000000, mapped to 0xf8080000, using 1875k, > total 14336k > vesafb: mode is 800x600x16, linelength=1600, pages=2 > vesafb: protected mode interface info at c000:c740 > vesafb: pmi: set display start = c00cc7a3, set palette = c00cc7fe > vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc > 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da > vesafb: scrolling: redraw > vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 > Console: switching to colour frame buffer device 100x37 > fbcondecor: console 0 using theme 'linhes' > fbcondecor: switched decor state to 'on' on console 0 > fb0: VESA VGA frame buffer device > isapnp: Scanning for PnP cards... > Switched to high resolution mode on CPU 1 > Switched to high resolution mode on CPU 0 > isapnp: No Plug & Play device found > Serial: 8250/16550 driver4 ports, IRQ sharing disabled > input: Macintosh mouse button emulation as /class/input/input0 > PNP: No PS/2 controller found. Probing ports directly. > serio: i8042 KBD port at 0x60,0x64 irq 1 > serio: i8042 AUX port at 0x60,0x64 irq 12 > mice: PS/2 mouse device common for all mice > cpuidle: using governor ladder > cpuidle: using governor menu > TCP cubic registered > NET: Registered protocol family 17 > Using IPI No-Shortcut mode > registered taskstats version 1 > Freeing unused kernel memory: 324k freed > SCSI subsystem initialized > libata version 3.00 loaded. > ata_piix 0000:00:1f.2: version 2.12 > ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 > ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ] > ata_piix 0000:00:1f.2: setting latency timer to 64 > scsi0 : ata_piix > scsi1 : ata_piix > ata1: SATA max UDMA/133 cmd 0xec00 ctl 0xe880 bmdma 0xe400 irq 19 > ata2: SATA max UDMA/133 cmd 0xe800 ctl 0xe480 bmdma 0xe408 irq 19 > ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) > ata1.00: ATA-8: ST31000340AS, SD1A, max UDMA/133 > ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32) > ata1.00: configured for UDMA/133 > ata2: SATA link down (SStatus 0 SControl 300) > scsi 0:0:0:0: Direct-Access ATA ST31000340AS SD1A PQ: 0 ANSI: 5 > ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19 > ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] > ata_piix 0000:00:1f.5: setting latency timer to 64 > scsi2 : ata_piix > scsi3 : ata_piix > ata3: SATA max UDMA/133 cmd 0xd000 ctl 0xcc00 bmdma 0xc480 irq 19 > ata4: SATA max UDMA/133 cmd 0xc880 ctl 0xc800 bmdma 0xc488 irq 19 > ata3: SATA link down (SStatus 0 SControl 300) > ata4: SATA link down (SStatus 0 SControl 300) > Driver 'sd' needs updating - please use bus_type methods > sd 0:0:0:0: [sda] 1953525168 512-byte hardware sectors: (1.00 TB/931 GiB) > sd 0:0:0:0: [sda] Write Protect is off > sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't > support DPO or FUA > sd 0:0:0:0: [sda] 1953525168 512-byte hardware sectors: (1.00 TB/931 GiB) > sd 0:0:0:0: [sda] Write Protect is off > sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 > sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't > support DPO or FUA > sda: sda1 sda2 sda3 > sd 0:0:0:0: [sda] Attached SCSI disk > EXT3-fs: mounted filesystem with ordered data mode. > kjournald starting. Commit interval 5 seconds > rtc_cmos 00:03: RTC can wake from S4 > rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 > rtc0: alarms up to one month, y3k, 114 bytes nvram > Linux video capture interface: v2.00 > cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.6 loaded > cx88/2: cx2388x dvb driver version 0.0.6 loaded > cx88/2: registering cx8802 driver, type: dvb access: shared > lirc_dev: IR Remote Control driver registered, major 61 > bttv: driver version 0.9.17 loaded > bttv: using 8 buffers with 2080k (520 pages) each for capture > ivtv: Start initialization, version 1.4.0 > ivtv0: Initializing card #0 > ivtv0: Autodetected Hauppauge card (cx23416 based) > ivtv 0000:09:01.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 > tveeprom 0-0050: Hauppauge model 32032, rev B110, serial# 6942304 > tveeprom 0-0050: tuner model is Philips FI1236 MK2 (idx 10, type 2) > tveeprom 0-0050: TV standards NTSC(M) (eeprom 0x08) > tveeprom 0-0050: audio processor is MSP4448 (idx 27) > tveeprom 0-0050: decoder processor is SAA7115 (idx 19) > tveeprom 0-0050: has no radio, has IR receiver, has no IR transmitter > ivtv0: Autodetected Hauppauge WinTV PVR-250 > saa7115 0-0021: saa7115 found (1f7115d0e100000) @ 0x42 (ivtv i2c driver #0) > msp3400 0-0040: MSP4448G-A2 found @ 0x80 (ivtv i2c driver #0) > msp3400 0-0040: msp3400 supports radio, mode is autodetect and autoselect > tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0) > tuner-simple 0-0061: creating new instance > tuner-simple 0-0061: type set to 2 (Philips NTSC (FI1236,FM1236 and > compatibles)) > ivtv0: Registered device video0 for encoder MPG (4096 kB) > ivtv0: Registered device video32 for encoder YUV (2048 kB) > ivtv0: Registered device vbi0 for encoder VBI (1024 kB) > ivtv0: Registered device video24 for encoder PCM (320 kB) > ivtv0: Initialized card #0: Hauppauge WinTV PVR-250 > ivtv: End initialization > cx88/0: cx2388x v4l2 driver version 0.0.6 loaded > lirc_i2c: chip 0x10020 found @ 0x18 (Hauppauge IR) > lirc_dev: lirc_register_plugin: sample_rate: 10 > input: Power Button (FF) as /class/input/input1 > ACPI: Power Button (FF) [PWRF] > input: Power Button (CM) as /class/input/input2 > ACPI: Power Button (CM) [PWRB] > processor ACPI_CPU:00: registered as cooling_device0 > processor ACPI_CPU:01: registered as cooling_device1 > thermal LNXTHERM:01: registered as thermal_zone0 > ACPI: Thermal Zone [THRM] (30 C) > usbcore: registered new interface driver usbfs > usbcore: registered new interface driver hub > usbcore: registered new device driver usb > Linux agpgart interface v0.103 > ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver > ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 > ehci_hcd 0000:00:1a.7: setting latency timer to 64 > ehci_hcd 0000:00:1a.7: EHCI Host Controller > ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 > ehci_hcd 0000:00:1a.7: debug port 1 > ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported > ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfebffc00 > ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 > usb usb1: configuration #1 chosen from 1 choice > hub 1-0:1.0: USB hub found > hub 1-0:1.0: 4 ports detected > ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 > ehci_hcd 0000:00:1d.7: setting latency timer to 64 > ehci_hcd 0000:00:1d.7: EHCI Host Controller > ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 > ehci_hcd 0000:00:1d.7: debug port 1 > ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported > ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfebff800 > ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 > usb usb2: configuration #1 chosen from 1 choice > hub 2-0:1.0: USB hub found > hub 2-0:1.0: 8 ports detected > nvidia: module license 'NVIDIA' taints kernel. > uhci_hcd: USB Universal Host Controller Interface driver > uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > uhci_hcd 0000:00:1a.0: setting latency timer to 64 > uhci_hcd 0000:00:1a.0: UHCI Host Controller > uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 > uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e000 > usb usb3: configuration #1 chosen from 1 choice > hub 3-0:1.0: USB hub found > hub 3-0:1.0: 2 ports detected > uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 > uhci_hcd 0000:00:1a.1: setting latency timer to 64 > uhci_hcd 0000:00:1a.1: UHCI Host Controller > uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 > uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000dc00 > usb usb4: configuration #1 chosen from 1 choice > hub 4-0:1.0: USB hub found > hub 4-0:1.0: 2 ports detected > uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 > uhci_hcd 0000:00:1d.0: setting latency timer to 64 > uhci_hcd 0000:00:1d.0: UHCI Host Controller > uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 > uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d880 > usb usb5: configuration #1 chosen from 1 choice > hub 5-0:1.0: USB hub found > hub 5-0:1.0: 2 ports detected > uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 > uhci_hcd 0000:00:1d.1: setting latency timer to 64 > uhci_hcd 0000:00:1d.1: UHCI Host Controller > uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 > uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d800 > usb usb6: configuration #1 chosen from 1 choice > hub 6-0:1.0: USB hub found > hub 6-0:1.0: 2 ports detected > uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 > uhci_hcd 0000:00:1d.2: setting latency timer to 64 > uhci_hcd 0000:00:1d.2: UHCI Host Controller > uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 > uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d480 > usb usb7: configuration #1 chosen from 1 choice > hub 7-0:1.0: USB hub found > hub 7-0:1.0: 2 ports detected > uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 > uhci_hcd 0000:00:1d.3: setting latency timer to 64 > uhci_hcd 0000:00:1d.3: UHCI Host Controller > uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8 > uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d400 > usb usb8: configuration #1 chosen from 1 choice > hub 8-0:1.0: USB hub found > hub 8-0:1.0: 2 ports detected > usb 3-2: new full speed USB device using uhci_hcd and address 2 > r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded > r8169 0000:08:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 > r8169 0000:08:00.0: setting latency timer to 64 > r8169 0000:08:00.0: irq 760 for MSI/MSI-X > eth0: RTL8168b/8111b at 0xf8352000, 00:19:21:38:42:ea, XID 38000000 IRQ 760 > sd 0:0:0:0: Attached scsi generic sg0 type 0 > usb 3-2: configuration #1 chosen from 1 choice > hub 3-2:1.0: USB hub found > hub 3-2:1.0: 2 ports detected > pci_hotplug: PCI Hot Plug PCI Core version: 0.5 > shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 > i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 > iTCO_vendor_support: vendor-support=0 > input: PC Speaker as /class/input/input3 > iTCO_wdt: Intel TCO WatchDog Timer Driver v1.04 > iTCO_wdt: Found a ICH9 TCO device (Version=2, TCOBASE=0x0860) > iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) > nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 > nvidia 0000:01:00.0: setting latency timer to 64 > NVRM: loading NVIDIA UNIX x86 Kernel Module 185.18.14 Wed May 27 > 02:23:13 PDT 2009 > usb 4-2: new full speed USB device using uhci_hcd and address 2 > AV200 0000:06:04.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 > usb 4-2: configuration #1 chosen from 1 choice > usb 8-1: new full speed USB device using uhci_hcd and address 2 > usb 8-1: configuration #1 chosen from 1 choice > usb 3-2.1: new full speed USB device using uhci_hcd and address 3 > Bluetooth: Core ver 2.13 > NET: Registered protocol family 31 > Bluetooth: HCI device and connection manager initialized > Bluetooth: HCI socket layer initialized > Bluetooth: HCI USB driver ver 2.10 > usbcore: registered new interface driver hci_usb > usb 3-2.1: configuration #1 chosen from 1 choice > usbcore: registered new interface driver hiddev > usb 3-2.2: new low speed USB device using uhci_hcd and address 4 > input: BTC Multimedia USB Keyboard as /class/input/input4 > generic-usb 0003:046E:530A.0001: input,hidraw0: USB HID v1.10 Keyboard > [BTC Multimedia USB Keyboard] on usb-0000:00:1a.0-2.1/input0 > usbcore: registered new interface driver usbhid > usbhid: v2.6:USB HID core driver > usb 3-2.2: configuration #1 chosen from 1 choice > input: Microsoft Microsoft Notebook/Mobile Optical Mouse 2.0 as > /class/input/input5 > generic-usb 0003:045E:007D.0002: input,hidraw1: USB HID v1.10 Mouse > [Microsoft Microsoft Notebook/Mobile Optical Mouse 2.0] on > usb-0000:00:1a.0-2.2/input0 > EXT3 FS on sda1, internal journal > kjournald starting. Commit interval 5 seconds > EXT3 FS on sda3, internal journal > EXT3-fs: mounted filesystem with ordered data mode. > Adding 1959920k swap on /dev/sda2. Priority:-1 extents:1 across:1959920k > cx88/2: cx2388x dvb driver version 0.0.6 loaded > cx88/2: registering cx8802 driver, type: dvb access: shared > r8169: eth0: link up > r8169: eth0: link up > RPC: Registered udp transport module. > RPC: Registered tcp transport module. > Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx). > NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory > NFSD: starting 90-second grace period > NET: Registered protocol family 10 > lo: Disabled Privacy Extensions > fuppes[4128]: segfault at 0 ip b7f91d41 sp bfca3810 error 4 in > libfuppes.so.0.0.0[b7f6a000+107000] > ivtv 0000:09:01.0: firmware: requesting v4l-cx2341x-enc.fw > ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes) > ivtv0: Encoder revision: 0x02060039 > fuppes[4716]: segfault at 0 ip b7fddd41 sp bfef1a60 error 4 in > libfuppes.so.0.0.0[b7fb6000+107000] > fuppes[4736]: segfault at 0 ip b7ecfd41 sp bfbe3750 error 4 in > libfuppes.so.0.0.0[b7ea8000+107000] > fuppes[4781]: segfault at 0 ip b7e5dd41 sp bfe711e0 error 4 in > libfuppes.so.0.0.0[b7e36000+107000] > fuppes[4796]: segfault at 0 ip b7f3bd41 sp bf84f3c0 error 4 in > libfuppes.so.0.0.0[b7f14000+107000] > fuppes[4797]: segfault at 0 ip b7f08d41 sp bf81a390 error 4 in > libfuppes.so.0.0.0[b7ee1000+107000] > fuppes[4800]: segfault at 0 ip b7ee6d41 sp bfaf7e70 error 4 in > libfuppes.so.0.0.0[b7ebf000+107000] > eth0: no IPv6 routers present > > > > > aplay -l & -L > [root@SnowTV ~]# aplay -l > **** List of PLAYBACK Hardware Devices **** > card 0: DX [Xonar DX], device 0: Multichannel [Multichannel] > Subdevices: 1/1 > Subdevice #0: subdevice #0 > card 0: DX [Xonar DX], device 1: Digital [Digital] > Subdevices: 1/1 > Subdevice #0: subdevice #0 > [root@SnowTV ~]# aplay -L > default:CARD=DX > Xonar DX, Multichannel > Default Audio Device > front:CARD=DX,DEV=0 > Xonar DX, Multichannel > Front speakers > surround40:CARD=DX,DEV=0 > Xonar DX, Multichannel > 4.0 Surround output to Front and Rear speakers > surround41:CARD=DX,DEV=0 > Xonar DX, Multichannel > 4.1 Surround output to Front, Rear and Subwoofer speakers > surround50:CARD=DX,DEV=0 > Xonar DX, Multichannel > 5.0 Surround output to Front, Center and Rear speakers > surround51:CARD=DX,DEV=0 > Xonar DX, Multichannel > 5.1 Surround output to Front, Center, Rear and Subwoofer speakers > surround71:CARD=DX,DEV=0 > Xonar DX, Multichannel > 7.1 Surround output to Front, Center, Side, Rear and Woofer speakers > iec958:CARD=DX,DEV=0 > Xonar DX, Multichannel > IEC958 (S/PDIF) Digital Audio Output > null > Discard all samples (playback) or generate zero samples (capture) > [root@SnowTV ~]# > > > lsmod > [root@SnowTV ~]# lsmod > Module Size Used by > ipv6 260212 16 > nfsd 221228 6 > lockd 66604 1 nfsd > nfs_acl 4864 1 nfsd > auth_rpcgss 34976 1 nfsd > sunrpc 174560 11 nfsd,lockd,nfs_acl,auth_rpcgss > exportfs 6016 1 nfsd > usbhid 36896 0 > hid 40704 1 usbhid > hci_usb 15384 0 > bluetooth 54372 1 hci_usb > snd_seq_oss 31872 0 > snd_seq_midi_event 8192 1 snd_seq_oss > snd_seq 49968 4 snd_seq_oss,snd_seq_midi_event > snd_pcm_oss 40320 0 > snd_mixer_oss 16512 1 snd_pcm_oss > snd_virtuoso 12676 0 > snd_oxygen_lib 30848 1 snd_virtuoso > snd_pcm 70020 2 snd_pcm_oss,snd_oxygen_lib > snd_timer 21384 2 snd_seq,snd_pcm > snd_page_alloc 10120 1 snd_pcm > snd_mpu401_uart 8704 1 snd_oxygen_lib > snd_rawmidi 21504 1 snd_mpu401_uart > snd_seq_device 8332 3 snd_seq_oss,snd_seq,snd_rawmidi > snd 50852 11 > snd_seq_oss,snd_seq,snd_pcm_oss,snd_mixer_oss,snd_virtuoso,snd_oxygen_lib,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device > soundcore 8160 1 snd > iTCO_wdt 12836 0 > pcspkr 4352 0 > iTCO_vendor_support 4996 1 iTCO_wdt > i2c_i801 10896 0 > psmouse 55828 0 > shpchp 34068 0 > pci_hotplug 28064 1 shpchp > serio_raw 7172 0 > sg 26804 0 > r8169 33924 0 > mii 6528 1 r8169 > uhci_hcd 24592 0 > nvidia 9545444 36 > intel_agp 27836 0 > ehci_hcd 36876 0 > agpgart 31572 2 nvidia,intel_agp > usbcore 136976 5 usbhid,hci_usb,uhci_hcd,ehci_hcd > evdev 11296 4 > thermal 17180 0 > processor 41388 1 thermal > fan 6276 0 > button 7824 0 > battery 12036 0 > ac 6020 0 > cx8800 31236 0 > msp3400 32332 0 > saa7115 18224 0 > tuner 26692 0 > tea5767 8580 1 tuner > tda8290 14468 1 tuner > tda18271 36232 1 tda8290 > tda827x 11652 1 tda8290 > mt20xx 14088 1 tuner > tea5761 6660 1 tuner > ivtv 142788 0 > cx2341x 14340 1 ivtv > bttv 165460 0 > compat_ioctl32 3072 3 cx8800,ivtv,bttv > v4l2_common 13184 7 cx8800,msp3400,saa7115,tuner,ivtv,cx2341x,bttv > lirc_i2c 10756 1 > lirc_dev 13492 1 lirc_i2c > cx88_vp3054_i2c 4352 0 > mt352 8196 0 > cx8802 16900 0 > cx88xx 69800 2 cx8800,cx8802 > videodev 34176 6 cx8800,msp3400,tuner,ivtv,bttv,cx88xx > v4l1_compat 15364 1 videodev > ir_common 40452 2 bttv,cx88xx > i2c_algo_bit 7556 4 ivtv,bttv,cx88_vp3054_i2c,cx88xx > tveeprom 13956 3 ivtv,bttv,cx88xx > btcx_risc 6408 4 cx8800,bttv,cx8802,cx88xx > tuner_xc2028 23600 1 tuner > s5h1409 10500 0 > xc5000 13192 1 tuner > dvb_pll 10632 0 > s5h1411 11396 0 > or51132 9988 0 > cx24116 16904 0 > videobuf_dvb 8324 2 cx8802,cx88xx > videobuf_dma_sg 12932 4 cx8800,bttv,cx8802,cx88xx > videobuf_core 17668 6 > cx8800,bttv,cx8802,cx88xx,videobuf_dvb,videobuf_dma_sg > nxt200x 14980 0 > isl6421 3840 0 > stb6000 5380 0 > tda9887 12164 1 tuner > tuner_simple 16144 1 tuner > tuner_types 16000 1 tuner_simple > zl10353 9352 0 > cx24123 15368 0 > lgdt330x 10244 0 > stv0299 11656 0 > dvb_core 81024 4 or51132,videobuf_dvb,lgdt330x,stv0299 > stv0288 9352 0 > cx22702 7556 0 > i2c_core 22804 38 > i2c_i801,nvidia,msp3400,saa7115,tuner,tea5767,tda8290,tda18271,tda827x,mt20xx,tea5761,ivtv,bttv,v4l2_common,lirc_i2c,cx88_vp3054_i2c,mt352,cx88xx,i2c_algo_bit,tveeprom,tuner_xc2028,s5h1409,xc5000,dvb_pll,s5h1411,or51132,cx24116,nxt200x,isl6421,stb6000,tda9887,tuner_simple,zl10353,cx24123,lgdt330x,stv0299,stv0288,cx22702 > rtc_cmos 12332 0 > rtc_core 17564 1 rtc_cmos > rtc_lib 4480 1 rtc_core > ext3 126984 2 > jbd 46996 1 ext3 > mbcache 8708 1 ext3 > sd_mod 26904 4 > pata_acpi 6016 0 > ata_piix 23300 3 > libata 158240 2 pata_acpi,ata_piix > scsi_mod 102036 3 sg,sd_mod,libata > [root@SnowTV ~]# > > > lspci > [root@SnowTV ~]# lspci > 00:00.0 Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM > Controller (rev 02) > 00:01.0 PCI bridge: Intel Corporation 82G33/G31/P35/P31 Express PCI > Express Root Port (rev 02) > 00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB > UHCI Controller #4 (rev 02) > 00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB > UHCI Controller #5 (rev 02) > 00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 > EHCI Controller #2 (rev 02) > 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express > Port 1 (rev 02) > 00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express > Port 2 (rev 02) > 00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express > Port 3 (rev 02) > 00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express > Port 4 (rev 02) > 00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express > Port 5 (rev 02) > 00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express > Port 6 (rev 02) > 00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB > UHCI Controller #1 (rev 02) > 00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB > UHCI Controller #2 (rev 02) > 00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB > UHCI Controller #3 (rev 02) > 00:1d.3 USB Controller: Intel Corporation 82801I (ICH9 Family) USB > UHCI Controller #6 (rev 02) > 00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 > EHCI Controller #1 (rev 02) > 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92) > 00:1f.0 ISA bridge: Intel Corporation 82801IB (ICH9) LPC Interface > Controller (rev 02) > 00:1f.2 IDE interface: Intel Corporation 82801IB (ICH9) 2 port SATA > IDE Controller (rev 02) > 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 02) > 00:1f.5 IDE interface: Intel Corporation 82801I (ICH9 Family) 2 port > SATA IDE Controller (rev 02) > 01:00.0 VGA compatible controller: nVidia Corporation GeForce 8400 GS (rev a1) > 05:00.0 PCI bridge: PLX Technology, Inc. PEX8112 x1 Lane PCI > Express-to-PCI Bridge (rev aa) > 06:04.0 Multimedia audio controller: C-Media Electronics Inc CMI8788 > [Oxygen HD Audio] > 08:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. > RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01) > 09:01.0 Multimedia video controller: Internext Compression Inc iTVC16 > (CX23416) MPEG-2 Encoder (rev 01) > [root@SnowTV ~]# > > lsusb > [root@SnowTV ~]# lsusb > Bus 008 Device 002: ID 0a12:0001 Cambridge Silicon Radio, Ltd > Bluetooth Dongle (HCI mode) > Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub > Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub > Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub > Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub > Bus 004 Device 002: ID 046d:0870 Logitech, Inc. QuickCam Express > Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub > Bus 003 Device 004: ID 045e:007d Microsoft Corp. Notebook Optical Mouse > Bus 003 Device 003: ID 046e:530a Behavior Tech. Computer Corp. > Bus 003 Device 002: ID 046e:5400 Behavior Tech. Computer Corp. > Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub > Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub > Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub > [root@SnowTV ~]# > ------------------------------------------------------------------------------ Enter the BlackBerry Developer Challenge This is your chance to win up to $100,000 in prizes! For a limited time, vendors submitting new applications to BlackBerry App World(TM) will have the opportunity to enter the BlackBerry Developer Challenge. See full prize details at: http://p.sf.net/sfu/Challenge _______________________________________________ Alsa-user mailing list Alsa-user@xxxxxxxxxxxxxxxxxxxxx https://lists.sourceforge.net/lists/listinfo/alsa-user
