Hey Alsa-Users list, I have been trying to get help via the distro forums for KnoppMyth(Now LinHES) but i'm not having much luck there. Forgive me for the forum copy & paste, but i'm really hoping there is something simple I can do like recompile the kernel to get this working. Copying the ubuntu kernel config is going to be my next attempt and comparing kernel version/patches but figured I would throw the problem here before I invest more time in this. Please point out any thing I might be missing. I have not spent any serious time with linux audio since the Sound blaster 16 was hot. I have a Asus Xonar DX sound card that was working perfectly in KnoppMyth/LinHES R5.5(Knoppix/debian based) after manually compiling alsa-driver 1.0.18b and 1.0.18 libs/utils/etc. After upgrading to KnoppMyth/LinHES R6(ArchLinux), the analog out plays audio perfectly through head phones or powered speakers, but the 3.5mm stereo-to-RCA cable going to RCA input on the TV doesn't produce any sound at all. I do realize that there are going to be significant differences between Linux distributions, but the guys driving the development of the distro have kept as much the same as possible without re-inventing the wheel Turning the TV volume up to 70+ doesn't make a difference, alsamixer settings are all set to 100. Muting the digital, aux, front-port, and mic-in channels have zero effect on the audio to the tv(no audio), or headphones(always work). I've tested with speaker-test, aplay, mplayer, and mythtv with and without VDPAU enabled binarys. Without changing any configuration or BIOS setting, booting ubuntu 9 i386 liveCD all audio tests work as expected on TV without any modifications. very strange! I mirrored the alsamixer settings from Ubuntu LiveCD exactly as well and it still doesn't work! I've tried compiling alsa 1.0.20(drivers,lib,utils,oss) per the alsa instructions here-> http://www.alsa-project.org/main/index.php/Matrix:Module-oxygen and I get the same result. I have tried many alsamixer combination's with & with-out IEC958, Line-In, Front Panel muted/un-muted. nothing will get the audio to output to the TV, but ALWAYS will play to an external PC speaker( Altec Lansing SoundBar ) or my ipod headphones. Here is some (hopefully useful) command output that might allow someone to help me cause i'm at a loss right now. dmesg [root@SnowTV ~]# dmesg BIOS EBDA/lowmem at: 0009dc00/0009dc00 Linux version 2.6.28-LinHES (root@myhost) (gcc version 4.3.2 (GCC) ) #1 SMP PREEMPT Sat Feb 14 12:09:54 UTC 2009 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD NSC Geode by NSC Cyrix CyrixInstead Centaur CentaurHauls Transmeta GenuineTMx86 Transmeta TransmetaCPU UMC UMC UMC UMC BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009dc00 (usable) BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007ffa0000 (usable) BIOS-e820: 000000007ffa0000 - 000000007ffae000 (ACPI data) BIOS-e820: 000000007ffae000 - 000000007fff0000 (ACPI NVS) BIOS-e820: 000000007fff0000 - 0000000080000000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) DMI present. AMI BIOS detected: BIOS may corrupt low RAM, working it around. last_pfn = 0x7ffa0 max_arch_pfn = 0x100000 x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 Scanning 0 areas for low memory corruption modified physical RAM map: modified: 0000000000000000 - 0000000000010000 (reserved) modified: 0000000000010000 - 000000000009dc00 (usable) modified: 000000000009dc00 - 00000000000a0000 (reserved) modified: 00000000000e0000 - 0000000000100000 (reserved) modified: 0000000000100000 - 000000007ffa0000 (usable) modified: 000000007ffa0000 - 000000007ffae000 (ACPI data) modified: 000000007ffae000 - 000000007fff0000 (ACPI NVS) modified: 000000007fff0000 - 0000000080000000 (reserved) modified: 00000000fee00000 - 00000000fee01000 (reserved) modified: 00000000ffb00000 - 0000000100000000 (reserved) kernel direct mapping tables up to 377fe000 @ 10000-16000 RAMDISK: 7fdf3000 - 7ff8f4b4 Allocated new RAMDISK: 0055f000 - 006fb4b4 Move RAMDISK from 000000007fdf3000 - 000000007ff8f4b3 to 0055f000 - 006fb4b3 ACPI: RSDP 000F9380, 0014 (r0 ACPIAM) ACPI: RSDT 7FFA0000, 003C (r1 041907 RSDT1450 20070419 MSFT 97) ACPI: FACP 7FFA0200, 0084 (r2 041907 FACP1450 20070419 MSFT 97) ACPI: DSDT 7FFA0440, 5B43 (r1 1AAAA 1AAAA000 0 INTL 20051117) ACPI: FACS 7FFAE000, 0040 ACPI: APIC 7FFA0390, 006C (r1 041907 APIC1450 20070419 MSFT 97) ACPI: MCFG 7FFA0400, 003C (r1 041907 OEMMCFG 20070419 MSFT 97) ACPI: OEMB 7FFAE040, 0061 (r1 041907 OEMB1450 20070419 MSFT 97) ACPI: ASF! 7FFA5F90, 0099 (r32 LEGEND I865PASF 1 INTL 20051117) ACPI: GSCI 7FFAE0B0, 2024 (r1 041907 GMCHSCI 20070419 MSFT 97) ACPI: Local APIC address 0xfee00000 1159MB HIGHMEM available. 887MB LOWMEM available. mapped low ram: 0 - 377fe000 low ram: 00000000 - 377fe000 bootmap 00012000 - 00018f00 (9 early reservations) ==> bootmem [0000000000 - 00377fe000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] #3 [0000100000 - 000055b520] TEXT DATA BSS ==> [0000100000 - 000055b520] #4 [000055c000 - 000055f000] INIT_PG_TABLE ==> [000055c000 - 000055f000] #5 [000009dc00 - 0000100000] BIOS reserved ==> [000009dc00 - 0000100000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000] #7 [000055f000 - 00006fb4b4] NEW RAMDISK ==> [000055f000 - 00006fb4b4] #8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000] found SMP MP-table at [c00ff780] 000ff780 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 Normal 0x00001000 -> 0x000377fe HighMem 0x000377fe -> 0x0007ffa0 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000010 -> 0x0000009d 0: 0x00000100 -> 0x0007ffa0 On node 0 totalpages: 524077 free_area_init_node: node 0, pgdat c0407780, node_mem_map c1000200 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3949 pages, LIFO batch:0 Normal zone: 1744 pages used for memmap Normal zone: 221486 pages, LIFO batch:31 HighMem zone: 2320 pages used for memmap HighMem zone: 294546 pages, LIFO batch:31 Movable zone: 0 pages used for memmap ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information SMP: Allowing 4 CPUs, 2 hotplug CPUs PM: Registered nosave memory: 000000000009d000 - 000000000009e000 PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 Allocating PCI resources starting at 88000000 (gap: 80000000:7ee00000) PERCPU: Allocating 36864 bytes of per cpu data NR_CPUS: 16, nr_cpu_ids: 4, nr_node_ids 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519981 Kernel command line: root=/dev/disk/by-uuid/445d1e75-1437-45df-8382-f63bb81acfaa ro init=/sbin/runit quiet vga=0x314 splash=silent,theme:linhes console=tty1 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 16384 bytes) Fast TSC calibration using PIT Detected 2493.822 MHz processor. Console: colour dummy device 80x25 console [tty1] enabled Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Scanning for low memory corruption every 60 seconds Memory: 2071964k/2096768k available (2235k kernel code, 23516k reserved, 1023k data, 324k init, 1187464k highmem) virtual kernel memory layout: fixmap : 0xffee8000 - 0xfffff000 (1116 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) .init : 0xc0435000 - 0xc0486000 ( 324 kB) .data : 0xc032ec9e - 0xc042eb5c (1023 kB) .text : 0xc0100000 - 0xc032ec9e (2235 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 Calibrating delay loop (skipped), value calculated using timer frequency.. 4989.46 BogoMIPS (lpj=8312740) Security Framework initialized Mount-cache hash table entries: 512 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. using mwait in idle threads. Checking 'hlt' instruction... OK. ACPI: Core revision 20080926 ACPI: Checking initramfs for custom DSDT ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel Pentium(R) Dual-Core CPU E5200 @ 2.50GHz stepping 06 Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 4989.94 BogoMIPS (lpj=8311916) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 CPU1: Intel Pentium(R) Dual-Core CPU E5200 @ 2.50GHz stepping 06 checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs Total of 2 processors activated (9978.41 BogoMIPS). net_namespace: 768 bytes Booting paravirtualized kernel on bare hardware NET: Registered protocol family 16 ACPI: bus type pci registered PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 PCI: Not using MMCONFIG. PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=9 PCI: Using configuration type 1 for base access ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 PCI: MCFG area at e0000000 reserved in ACPI motherboard resources PCI: Using MMCONFIG for extended config space ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:01.0: PME# supported from D0 D3hot D3cold pci 0000:00:01.0: PME# disabled pci 0000:00:1a.0: reg 20 io port: [0xe000-0xe01f] pci 0000:00:1a.1: reg 20 io port: [0xdc00-0xdc1f] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfebffc00-0xfebfffff] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold pci 0000:00:1a.7: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold pci 0000:00:1c.1: PME# disabled pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold pci 0000:00:1c.2: PME# disabled pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold pci 0000:00:1c.3: PME# disabled pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold pci 0000:00:1c.4: PME# disabled pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold pci 0000:00:1c.5: PME# disabled pci 0000:00:1d.0: reg 20 io port: [0xd880-0xd89f] pci 0000:00:1d.1: reg 20 io port: [0xd800-0xd81f] pci 0000:00:1d.2: reg 20 io port: [0xd480-0xd49f] pci 0000:00:1d.3: reg 20 io port: [0xd400-0xd41f] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfebff800-0xfebffbff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO pci 0000:00:1f.2: reg 10 io port: [0xec00-0xec07] pci 0000:00:1f.2: reg 14 io port: [0xe880-0xe883] pci 0000:00:1f.2: reg 18 io port: [0xe800-0xe807] pci 0000:00:1f.2: reg 1c io port: [0xe480-0xe483] pci 0000:00:1f.2: reg 20 io port: [0xe400-0xe40f] pci 0000:00:1f.2: reg 24 io port: [0xe080-0xe08f] pci 0000:00:1f.3: reg 10 64bit mmio: [0xfebff400-0xfebff4ff] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f] pci 0000:00:1f.5: reg 10 io port: [0xd000-0xd007] pci 0000:00:1f.5: reg 14 io port: [0xcc00-0xcc03] pci 0000:00:1f.5: reg 18 io port: [0xc880-0xc887] pci 0000:00:1f.5: reg 1c io port: [0xc800-0xc803] pci 0000:00:1f.5: reg 20 io port: [0xc480-0xc48f] pci 0000:00:1f.5: reg 24 io port: [0xc400-0xc40f] pci 0000:01:00.0: reg 10 32bit mmio: [0xfd000000-0xfdffffff] pci 0000:01:00.0: reg 14 64bit mmio: [0xc0000000-0xcfffffff] pci 0000:01:00.0: reg 1c 64bit mmio: [0xfa000000-0xfbffffff] pci 0000:01:00.0: reg 24 io port: [0x9c00-0x9c7f] pci 0000:01:00.0: reg 30 32bit mmio: [0xfe9e0000-0xfe9fffff] pci 0000:00:01.0: bridge io port: [0x9000-0x9fff] pci 0000:00:01.0: bridge 32bit mmio: [0xf8900000-0xfe9fffff] pci 0000:00:01.0: bridge 64bit mmio pref: [0xb7f00000-0xd7efffff] pci 0000:00:1c.3: bridge io port: [0xa000-0xafff] pci 0000:06:04.0: reg 10 io port: [0xa800-0xa8ff] pci 0000:06:04.0: supports D1 D2 pci 0000:05:00.0: bridge io port: [0xa000-0xafff] pci 0000:08:00.0: reg 10 io port: [0xb800-0xb8ff] pci 0000:08:00.0: reg 18 64bit mmio: [0xfeaff000-0xfeafffff] pci 0000:08:00.0: reg 30 32bit mmio: [0xfeac0000-0xfeadffff] pci 0000:08:00.0: supports D1 D2 pci 0000:08:00.0: PME# supported from D1 D2 D3hot D3cold pci 0000:08:00.0: PME# disabled pci 0000:00:1c.5: bridge io port: [0xb000-0xbfff] pci 0000:00:1c.5: bridge 32bit mmio: [0xfea00000-0xfeafffff] pci 0000:09:01.0: reg 10 32bit mmio: [0xd8000000-0xdbffffff] pci 0000:00:1e.0: transparent bridge pci 0000:00:1e.0: bridge 64bit mmio pref: [0xd7f00000-0xdfefffff] bus 00 -> node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs *5) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12 14 *15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 *7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 *14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 6 7 10 11 12 14 15) PCI: Using ACPI for IRQ routing NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 13 devices ACPI: ACPI bus type pnp unregistered system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved system 00:06: ioport range 0xa00-0xa0f has been reserved system 00:06: ioport range 0xa10-0xa1f has been reserved system 00:06: ioport range 0xa20-0xa2f has been reserved system 00:06: ioport range 0xa30-0xa3f has been reserved system 00:07: ioport range 0x4d0-0x4d1 has been reserved system 00:07: ioport range 0x800-0x87f has been reserved system 00:07: ioport range 0x480-0x4bf has been reserved system 00:07: iomem range 0xfed1c000-0xfed1ffff has been reserved system 00:07: iomem range 0xfed20000-0xfed8ffff has been reserved system 00:09: iomem range 0xffc00000-0xffefffff has been reserved system 00:0a: iomem range 0xfec00000-0xfec00fff has been reserved system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved system 00:0c: iomem range 0x0-0x9ffff could not be reserved system 00:0c: iomem range 0xc0000-0xcffff could not be reserved system 00:0c: iomem range 0xe0000-0xfffff could not be reserved system 00:0c: iomem range 0x100000-0x7fffffff could not be reserved pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 pci 0000:00:01.0: IO window: 0x9000-0x9fff pci 0000:00:01.0: MEM window: 0xf8900000-0xfe9fffff pci 0000:00:01.0: PREFETCH window: 0x000000b7f00000-0x000000d7efffff pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 pci 0000:00:1c.0: IO window: disabled pci 0000:00:1c.0: MEM window: disabled pci 0000:00:1c.0: PREFETCH window: disabled pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03 pci 0000:00:1c.1: IO window: disabled pci 0000:00:1c.1: MEM window: disabled pci 0000:00:1c.1: PREFETCH window: disabled pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04 pci 0000:00:1c.2: IO window: disabled pci 0000:00:1c.2: MEM window: disabled pci 0000:00:1c.2: PREFETCH window: disabled pci 0000:05:00.0: PCI bridge, secondary bus 0000:06 pci 0000:05:00.0: IO window: 0xa000-0xafff pci 0000:05:00.0: MEM window: disabled pci 0000:05:00.0: PREFETCH window: disabled pci 0000:00:1c.3: PCI bridge, secondary bus 0000:05 pci 0000:00:1c.3: IO window: 0xa000-0xafff pci 0000:00:1c.3: MEM window: disabled pci 0000:00:1c.3: PREFETCH window: disabled pci 0000:00:1c.4: PCI bridge, secondary bus 0000:07 pci 0000:00:1c.4: IO window: disabled pci 0000:00:1c.4: MEM window: disabled pci 0000:00:1c.4: PREFETCH window: disabled pci 0000:00:1c.5: PCI bridge, secondary bus 0000:08 pci 0000:00:1c.5: IO window: 0xb000-0xbfff pci 0000:00:1c.5: MEM window: 0xfea00000-0xfeafffff pci 0000:00:1c.5: PREFETCH window: disabled pci 0000:00:1e.0: PCI bridge, secondary bus 0000:09 pci 0000:00:1e.0: IO window: disabled pci 0000:00:1e.0: MEM window: disabled pci 0000:00:1e.0: PREFETCH window: 0x000000d7f00000-0x000000dfefffff pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:01.0: setting latency timer to 64 pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.1: setting latency timer to 64 pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:1c.2: setting latency timer to 64 pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 pci 0000:00:1c.3: setting latency timer to 64 pci 0000:05:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 pci 0000:05:00.0: setting latency timer to 64 pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.4: setting latency timer to 64 pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.5: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 bus: 00 index 0 io port: [0x00-0xffff] bus: 00 index 1 mmio: [0x000000-0xffffffff] bus: 01 index 0 io port: [0x9000-0x9fff] bus: 01 index 1 mmio: [0xf8900000-0xfe9fffff] bus: 01 index 2 mmio: [0xb7f00000-0xd7efffff] bus: 01 index 3 mmio: [0x0-0x0] bus: 02 index 0 mmio: [0x0-0x0] bus: 02 index 1 mmio: [0x0-0x0] bus: 02 index 2 mmio: [0x0-0x0] bus: 02 index 3 mmio: [0x0-0x0] bus: 03 index 0 mmio: [0x0-0x0] bus: 03 index 1 mmio: [0x0-0x0] bus: 03 index 2 mmio: [0x0-0x0] bus: 03 index 3 mmio: [0x0-0x0] bus: 04 index 0 mmio: [0x0-0x0] bus: 04 index 1 mmio: [0x0-0x0] bus: 04 index 2 mmio: [0x0-0x0] bus: 04 index 3 mmio: [0x0-0x0] bus: 05 index 0 io port: [0xa000-0xafff] bus: 05 index 1 mmio: [0x0-0x0] bus: 05 index 2 mmio: [0x0-0x0] bus: 05 index 3 mmio: [0x0-0x0] bus: 06 index 0 io port: [0xa000-0xafff] bus: 06 index 1 mmio: [0x0-0x0] bus: 06 index 2 mmio: [0x0-0x0] bus: 06 index 3 mmio: [0x0-0x0] bus: 07 index 0 mmio: [0x0-0x0] bus: 07 index 1 mmio: [0x0-0x0] bus: 07 index 2 mmio: [0x0-0x0] bus: 07 index 3 mmio: [0x0-0x0] bus: 08 index 0 io port: [0xb000-0xbfff] bus: 08 index 1 mmio: [0xfea00000-0xfeafffff] bus: 08 index 2 mmio: [0x0-0x0] bus: 08 index 3 mmio: [0x0-0x0] bus: 09 index 0 mmio: [0x0-0x0] bus: 09 index 1 mmio: [0x0-0x0] bus: 09 index 2 mmio: [0xd7f00000-0xdfefffff] bus: 09 index 3 io port: [0x00-0xffff] bus: 09 index 4 mmio: [0x000000-0xffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 Unpacking initramfs... done Freeing initrd memory: 1649k freed apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) apm: disabled - APM is not SMP safe. highmem bounce pool size: 64 pages VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) msgmni has been set to 1732 alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:01:00.0: Boot video device pcieport-driver 0000:00:01.0: setting latency timer to 64 pcieport-driver 0000:00:01.0: found MSI capability pcieport-driver 0000:00:01.0: irq 767 for MSI/MSI-X pci_express 0000:00:01.0:pcie00: allocate port service pci_express 0000:00:01.0:pcie03: allocate port service pcieport-driver 0000:00:1c.0: setting latency timer to 64 pcieport-driver 0000:00:1c.0: found MSI capability pcieport-driver 0000:00:1c.0: irq 766 for MSI/MSI-X pci_express 0000:00:1c.0:pcie00: allocate port service pci_express 0000:00:1c.0:pcie02: allocate port service pci_express 0000:00:1c.0:pcie03: allocate port service pcieport-driver 0000:00:1c.1: setting latency timer to 64 pcieport-driver 0000:00:1c.1: found MSI capability pcieport-driver 0000:00:1c.1: irq 765 for MSI/MSI-X pci_express 0000:00:1c.1:pcie00: allocate port service pci_express 0000:00:1c.1:pcie02: allocate port service pci_express 0000:00:1c.1:pcie03: allocate port service pcieport-driver 0000:00:1c.2: setting latency timer to 64 pcieport-driver 0000:00:1c.2: found MSI capability pcieport-driver 0000:00:1c.2: irq 764 for MSI/MSI-X pci_express 0000:00:1c.2:pcie00: allocate port service pci_express 0000:00:1c.2:pcie02: allocate port service pci_express 0000:00:1c.2:pcie03: allocate port service pcieport-driver 0000:00:1c.3: setting latency timer to 64 pcieport-driver 0000:00:1c.3: found MSI capability pcieport-driver 0000:00:1c.3: irq 763 for MSI/MSI-X pci_express 0000:00:1c.3:pcie00: allocate port service pci_express 0000:00:1c.3:pcie02: allocate port service pci_express 0000:00:1c.3:pcie03: allocate port service pcieport-driver 0000:00:1c.4: setting latency timer to 64 pcieport-driver 0000:00:1c.4: found MSI capability pcieport-driver 0000:00:1c.4: irq 762 for MSI/MSI-X pci_express 0000:00:1c.4:pcie00: allocate port service pci_express 0000:00:1c.4:pcie02: allocate port service pci_express 0000:00:1c.4:pcie03: allocate port service pcieport-driver 0000:00:1c.5: setting latency timer to 64 pcieport-driver 0000:00:1c.5: found MSI capability pcieport-driver 0000:00:1c.5: irq 761 for MSI/MSI-X pci_express 0000:00:1c.5:pcie00: allocate port service pci_express 0000:00:1c.5:pcie02: allocate port service pci_express 0000:00:1c.5:pcie03: allocate port service vesafb: framebuffer at 0xfb000000, mapped to 0xf8080000, using 1875k, total 14336k vesafb: mode is 800x600x16, linelength=1600, pages=2 vesafb: protected mode interface info at c000:c740 vesafb: pmi: set display start = c00cc7a3, set palette = c00cc7fe vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 Console: switching to colour frame buffer device 100x37 fbcondecor: console 0 using theme 'linhes' fbcondecor: switched decor state to 'on' on console 0 fb0: VESA VGA frame buffer device isapnp: Scanning for PnP cards... Switched to high resolution mode on CPU 1 Switched to high resolution mode on CPU 0 isapnp: No Plug & Play device found Serial: 8250/16550 driver4 ports, IRQ sharing disabled input: Macintosh mouse button emulation as /class/input/input0 PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice cpuidle: using governor ladder cpuidle: using governor menu TCP cubic registered NET: Registered protocol family 17 Using IPI No-Shortcut mode registered taskstats version 1 Freeing unused kernel memory: 324k freed SCSI subsystem initialized libata version 3.00 loaded. ata_piix 0000:00:1f.2: version 2.12 ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ] ata_piix 0000:00:1f.2: setting latency timer to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: SATA max UDMA/133 cmd 0xec00 ctl 0xe880 bmdma 0xe400 irq 19 ata2: SATA max UDMA/133 cmd 0xe800 ctl 0xe480 bmdma 0xe408 irq 19 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATA-8: ST31000340AS, SD1A, max UDMA/133 ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32) ata1.00: configured for UDMA/133 ata2: SATA link down (SStatus 0 SControl 300) scsi 0:0:0:0: Direct-Access ATA ST31000340AS SD1A PQ: 0 ANSI: 5 ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] ata_piix 0000:00:1f.5: setting latency timer to 64 scsi2 : ata_piix scsi3 : ata_piix ata3: SATA max UDMA/133 cmd 0xd000 ctl 0xcc00 bmdma 0xc480 irq 19 ata4: SATA max UDMA/133 cmd 0xc880 ctl 0xc800 bmdma 0xc488 irq 19 ata3: SATA link down (SStatus 0 SControl 300) ata4: SATA link down (SStatus 0 SControl 300) Driver 'sd' needs updating - please use bus_type methods sd 0:0:0:0: [sda] 1953525168 512-byte hardware sectors: (1.00 TB/931 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 1953525168 512-byte hardware sectors: (1.00 TB/931 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sd 0:0:0:0: [sda] Attached SCSI disk EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds rtc_cmos 00:03: RTC can wake from S4 rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, 114 bytes nvram Linux video capture interface: v2.00 cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.6 loaded cx88/2: cx2388x dvb driver version 0.0.6 loaded cx88/2: registering cx8802 driver, type: dvb access: shared lirc_dev: IR Remote Control driver registered, major 61 bttv: driver version 0.9.17 loaded bttv: using 8 buffers with 2080k (520 pages) each for capture ivtv: Start initialization, version 1.4.0 ivtv0: Initializing card #0 ivtv0: Autodetected Hauppauge card (cx23416 based) ivtv 0000:09:01.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 tveeprom 0-0050: Hauppauge model 32032, rev B110, serial# 6942304 tveeprom 0-0050: tuner model is Philips FI1236 MK2 (idx 10, type 2) tveeprom 0-0050: TV standards NTSC(M) (eeprom 0x08) tveeprom 0-0050: audio processor is MSP4448 (idx 27) tveeprom 0-0050: decoder processor is SAA7115 (idx 19) tveeprom 0-0050: has no radio, has IR receiver, has no IR transmitter ivtv0: Autodetected Hauppauge WinTV PVR-250 saa7115 0-0021: saa7115 found (1f7115d0e100000) @ 0x42 (ivtv i2c driver #0) msp3400 0-0040: MSP4448G-A2 found @ 0x80 (ivtv i2c driver #0) msp3400 0-0040: msp3400 supports radio, mode is autodetect and autoselect tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0) tuner-simple 0-0061: creating new instance tuner-simple 0-0061: type set to 2 (Philips NTSC (FI1236,FM1236 and compatibles)) ivtv0: Registered device video0 for encoder MPG (4096 kB) ivtv0: Registered device video32 for encoder YUV (2048 kB) ivtv0: Registered device vbi0 for encoder VBI (1024 kB) ivtv0: Registered device video24 for encoder PCM (320 kB) ivtv0: Initialized card #0: Hauppauge WinTV PVR-250 ivtv: End initialization cx88/0: cx2388x v4l2 driver version 0.0.6 loaded lirc_i2c: chip 0x10020 found @ 0x18 (Hauppauge IR) lirc_dev: lirc_register_plugin: sample_rate: 10 input: Power Button (FF) as /class/input/input1 ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /class/input/input2 ACPI: Power Button (CM) [PWRB] processor ACPI_CPU:00: registered as cooling_device0 processor ACPI_CPU:01: registered as cooling_device1 thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [THRM] (30 C) usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb Linux agpgart interface v0.103 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ehci_hcd 0000:00:1a.7: setting latency timer to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.7: debug port 1 ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfebffc00 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 4 ports detected ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfebff800 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 8 ports detected nvidia: module license 'NVIDIA' taints kernel. uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1a.0: setting latency timer to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e000 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1a.1: setting latency timer to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000dc00 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d880 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d800 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d480 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1d.3: setting latency timer to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8 uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d400 usb usb8: configuration #1 chosen from 1 choice hub 8-0:1.0: USB hub found hub 8-0:1.0: 2 ports detected usb 3-2: new full speed USB device using uhci_hcd and address 2 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded r8169 0000:08:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 r8169 0000:08:00.0: setting latency timer to 64 r8169 0000:08:00.0: irq 760 for MSI/MSI-X eth0: RTL8168b/8111b at 0xf8352000, 00:19:21:38:42:ea, XID 38000000 IRQ 760 sd 0:0:0:0: Attached scsi generic sg0 type 0 usb 3-2: configuration #1 chosen from 1 choice hub 3-2:1.0: USB hub found hub 3-2:1.0: 2 ports detected pci_hotplug: PCI Hot Plug PCI Core version: 0.5 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 iTCO_vendor_support: vendor-support=0 input: PC Speaker as /class/input/input3 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.04 iTCO_wdt: Found a ICH9 TCO device (Version=2, TCOBASE=0x0860) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 nvidia 0000:01:00.0: setting latency timer to 64 NVRM: loading NVIDIA UNIX x86 Kernel Module 185.18.14 Wed May 27 02:23:13 PDT 2009 usb 4-2: new full speed USB device using uhci_hcd and address 2 AV200 0000:06:04.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 usb 4-2: configuration #1 chosen from 1 choice usb 8-1: new full speed USB device using uhci_hcd and address 2 usb 8-1: configuration #1 chosen from 1 choice usb 3-2.1: new full speed USB device using uhci_hcd and address 3 Bluetooth: Core ver 2.13 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: HCI USB driver ver 2.10 usbcore: registered new interface driver hci_usb usb 3-2.1: configuration #1 chosen from 1 choice usbcore: registered new interface driver hiddev usb 3-2.2: new low speed USB device using uhci_hcd and address 4 input: BTC Multimedia USB Keyboard as /class/input/input4 generic-usb 0003:046E:530A.0001: input,hidraw0: USB HID v1.10 Keyboard [BTC Multimedia USB Keyboard] on usb-0000:00:1a.0-2.1/input0 usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver usb 3-2.2: configuration #1 chosen from 1 choice input: Microsoft Microsoft Notebook/Mobile Optical Mouse 2.0 as /class/input/input5 generic-usb 0003:045E:007D.0002: input,hidraw1: USB HID v1.10 Mouse [Microsoft Microsoft Notebook/Mobile Optical Mouse 2.0] on usb-0000:00:1a.0-2.2/input0 EXT3 FS on sda1, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sda3, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 1959920k swap on /dev/sda2. Priority:-1 extents:1 across:1959920k cx88/2: cx2388x dvb driver version 0.0.6 loaded cx88/2: registering cx8802 driver, type: dvb access: shared r8169: eth0: link up r8169: eth0: link up RPC: Registered udp transport module. RPC: Registered tcp transport module. Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx). NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory NFSD: starting 90-second grace period NET: Registered protocol family 10 lo: Disabled Privacy Extensions fuppes[4128]: segfault at 0 ip b7f91d41 sp bfca3810 error 4 in libfuppes.so.0.0.0[b7f6a000+107000] ivtv 0000:09:01.0: firmware: requesting v4l-cx2341x-enc.fw ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes) ivtv0: Encoder revision: 0x02060039 fuppes[4716]: segfault at 0 ip b7fddd41 sp bfef1a60 error 4 in libfuppes.so.0.0.0[b7fb6000+107000] fuppes[4736]: segfault at 0 ip b7ecfd41 sp bfbe3750 error 4 in libfuppes.so.0.0.0[b7ea8000+107000] fuppes[4781]: segfault at 0 ip b7e5dd41 sp bfe711e0 error 4 in libfuppes.so.0.0.0[b7e36000+107000] fuppes[4796]: segfault at 0 ip b7f3bd41 sp bf84f3c0 error 4 in libfuppes.so.0.0.0[b7f14000+107000] fuppes[4797]: segfault at 0 ip b7f08d41 sp bf81a390 error 4 in libfuppes.so.0.0.0[b7ee1000+107000] fuppes[4800]: segfault at 0 ip b7ee6d41 sp bfaf7e70 error 4 in libfuppes.so.0.0.0[b7ebf000+107000] eth0: no IPv6 routers present aplay -l & -L [root@SnowTV ~]# aplay -l **** List of PLAYBACK Hardware Devices **** card 0: DX [Xonar DX], device 0: Multichannel [Multichannel] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: DX [Xonar DX], device 1: Digital [Digital] Subdevices: 1/1 Subdevice #0: subdevice #0 [root@SnowTV ~]# aplay -L default:CARD=DX Xonar DX, Multichannel Default Audio Device front:CARD=DX,DEV=0 Xonar DX, Multichannel Front speakers surround40:CARD=DX,DEV=0 Xonar DX, Multichannel 4.0 Surround output to Front and Rear speakers surround41:CARD=DX,DEV=0 Xonar DX, Multichannel 4.1 Surround output to Front, Rear and Subwoofer speakers surround50:CARD=DX,DEV=0 Xonar DX, Multichannel 5.0 Surround output to Front, Center and Rear speakers surround51:CARD=DX,DEV=0 Xonar DX, Multichannel 5.1 Surround output to Front, Center, Rear and Subwoofer speakers surround71:CARD=DX,DEV=0 Xonar DX, Multichannel 7.1 Surround output to Front, Center, Side, Rear and Woofer speakers iec958:CARD=DX,DEV=0 Xonar DX, Multichannel IEC958 (S/PDIF) Digital Audio Output null Discard all samples (playback) or generate zero samples (capture) [root@SnowTV ~]# lsmod [root@SnowTV ~]# lsmod Module Size Used by ipv6 260212 16 nfsd 221228 6 lockd 66604 1 nfsd nfs_acl 4864 1 nfsd auth_rpcgss 34976 1 nfsd sunrpc 174560 11 nfsd,lockd,nfs_acl,auth_rpcgss exportfs 6016 1 nfsd usbhid 36896 0 hid 40704 1 usbhid hci_usb 15384 0 bluetooth 54372 1 hci_usb snd_seq_oss 31872 0 snd_seq_midi_event 8192 1 snd_seq_oss snd_seq 49968 4 snd_seq_oss,snd_seq_midi_event snd_pcm_oss 40320 0 snd_mixer_oss 16512 1 snd_pcm_oss snd_virtuoso 12676 0 snd_oxygen_lib 30848 1 snd_virtuoso snd_pcm 70020 2 snd_pcm_oss,snd_oxygen_lib snd_timer 21384 2 snd_seq,snd_pcm snd_page_alloc 10120 1 snd_pcm snd_mpu401_uart 8704 1 snd_oxygen_lib snd_rawmidi 21504 1 snd_mpu401_uart snd_seq_device 8332 3 snd_seq_oss,snd_seq,snd_rawmidi snd 50852 11 snd_seq_oss,snd_seq,snd_pcm_oss,snd_mixer_oss,snd_virtuoso,snd_oxygen_lib,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device soundcore 8160 1 snd iTCO_wdt 12836 0 pcspkr 4352 0 iTCO_vendor_support 4996 1 iTCO_wdt i2c_i801 10896 0 psmouse 55828 0 shpchp 34068 0 pci_hotplug 28064 1 shpchp serio_raw 7172 0 sg 26804 0 r8169 33924 0 mii 6528 1 r8169 uhci_hcd 24592 0 nvidia 9545444 36 intel_agp 27836 0 ehci_hcd 36876 0 agpgart 31572 2 nvidia,intel_agp usbcore 136976 5 usbhid,hci_usb,uhci_hcd,ehci_hcd evdev 11296 4 thermal 17180 0 processor 41388 1 thermal fan 6276 0 button 7824 0 battery 12036 0 ac 6020 0 cx8800 31236 0 msp3400 32332 0 saa7115 18224 0 tuner 26692 0 tea5767 8580 1 tuner tda8290 14468 1 tuner tda18271 36232 1 tda8290 tda827x 11652 1 tda8290 mt20xx 14088 1 tuner tea5761 6660 1 tuner ivtv 142788 0 cx2341x 14340 1 ivtv bttv 165460 0 compat_ioctl32 3072 3 cx8800,ivtv,bttv v4l2_common 13184 7 cx8800,msp3400,saa7115,tuner,ivtv,cx2341x,bttv lirc_i2c 10756 1 lirc_dev 13492 1 lirc_i2c cx88_vp3054_i2c 4352 0 mt352 8196 0 cx8802 16900 0 cx88xx 69800 2 cx8800,cx8802 videodev 34176 6 cx8800,msp3400,tuner,ivtv,bttv,cx88xx v4l1_compat 15364 1 videodev ir_common 40452 2 bttv,cx88xx i2c_algo_bit 7556 4 ivtv,bttv,cx88_vp3054_i2c,cx88xx tveeprom 13956 3 ivtv,bttv,cx88xx btcx_risc 6408 4 cx8800,bttv,cx8802,cx88xx tuner_xc2028 23600 1 tuner s5h1409 10500 0 xc5000 13192 1 tuner dvb_pll 10632 0 s5h1411 11396 0 or51132 9988 0 cx24116 16904 0 videobuf_dvb 8324 2 cx8802,cx88xx videobuf_dma_sg 12932 4 cx8800,bttv,cx8802,cx88xx videobuf_core 17668 6 cx8800,bttv,cx8802,cx88xx,videobuf_dvb,videobuf_dma_sg nxt200x 14980 0 isl6421 3840 0 stb6000 5380 0 tda9887 12164 1 tuner tuner_simple 16144 1 tuner tuner_types 16000 1 tuner_simple zl10353 9352 0 cx24123 15368 0 lgdt330x 10244 0 stv0299 11656 0 dvb_core 81024 4 or51132,videobuf_dvb,lgdt330x,stv0299 stv0288 9352 0 cx22702 7556 0 i2c_core 22804 38 i2c_i801,nvidia,msp3400,saa7115,tuner,tea5767,tda8290,tda18271,tda827x,mt20xx,tea5761,ivtv,bttv,v4l2_common,lirc_i2c,cx88_vp3054_i2c,mt352,cx88xx,i2c_algo_bit,tveeprom,tuner_xc2028,s5h1409,xc5000,dvb_pll,s5h1411,or51132,cx24116,nxt200x,isl6421,stb6000,tda9887,tuner_simple,zl10353,cx24123,lgdt330x,stv0299,stv0288,cx22702 rtc_cmos 12332 0 rtc_core 17564 1 rtc_cmos rtc_lib 4480 1 rtc_core ext3 126984 2 jbd 46996 1 ext3 mbcache 8708 1 ext3 sd_mod 26904 4 pata_acpi 6016 0 ata_piix 23300 3 libata 158240 2 pata_acpi,ata_piix scsi_mod 102036 3 sg,sd_mod,libata [root@SnowTV ~]# lspci [root@SnowTV ~]# lspci 00:00.0 Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller (rev 02) 00:01.0 PCI bridge: Intel Corporation 82G33/G31/P35/P31 Express PCI Express Root Port (rev 02) 00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 02) 00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 02) 00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 02) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 02) 00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 02) 00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 02) 00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 02) 00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 02) 00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 02) 00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 02) 00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 02) 00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 02) 00:1d.3 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 02) 00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92) 00:1f.0 ISA bridge: Intel Corporation 82801IB (ICH9) LPC Interface Controller (rev 02) 00:1f.2 IDE interface: Intel Corporation 82801IB (ICH9) 2 port SATA IDE Controller (rev 02) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 02) 00:1f.5 IDE interface: Intel Corporation 82801I (ICH9 Family) 2 port SATA IDE Controller (rev 02) 01:00.0 VGA compatible controller: nVidia Corporation GeForce 8400 GS (rev a1) 05:00.0 PCI bridge: PLX Technology, Inc. PEX8112 x1 Lane PCI Express-to-PCI Bridge (rev aa) 06:04.0 Multimedia audio controller: C-Media Electronics Inc CMI8788 [Oxygen HD Audio] 08:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01) 09:01.0 Multimedia video controller: Internext Compression Inc iTVC16 (CX23416) MPEG-2 Encoder (rev 01) [root@SnowTV ~]# lsusb [root@SnowTV ~]# lsusb Bus 008 Device 002: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode) Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 002: ID 046d:0870 Logitech, Inc. QuickCam Express Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 004: ID 045e:007d Microsoft Corp. Notebook Optical Mouse Bus 003 Device 003: ID 046e:530a Behavior Tech. Computer Corp. Bus 003 Device 002: ID 046e:5400 Behavior Tech. Computer Corp. Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub [root@SnowTV ~]# ------------------------------------------------------------------------------ Enter the BlackBerry Developer Challenge This is your chance to win up to $100,000 in prizes! For a limited time, vendors submitting new applications to BlackBerry App World(TM) will have the opportunity to enter the BlackBerry Developer Challenge. See full prize details at: http://p.sf.net/sfu/Challenge _______________________________________________ Alsa-user mailing list Alsa-user@xxxxxxxxxxxxxxxxxxxxx https://lists.sourceforge.net/lists/listinfo/alsa-user
