On Fri, Apr 17, 2009 at 2:27 AM, Clemens Ladisch <cladisch@xxxxxxxxxxxxxx> wrote: > Phil Gorbett wrote: >> I am having difficulty getting the microphone(s) going with this >> monitor, and get the get the following results when I disable pulseaudio >> and run arecord: >> >> "arecord -v -f cd -D plughw:0 file.wav >> Recording WAVE 'file.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, Stereo >> ALSA lib pcm_params.c:2135:(snd1_pcm_hw_refine_slave) Slave PCM not usable >> arecord: set_params:939: Broken configuration for this PCM: no configurations available" > > Please show the output of "lsusb -v" for this device. > > > Best regards, > Clemens I'm not the OP but I have the same monitor and same problem. Here's the lsusb output for the microphone: http://pastebin.com/f4c340014 ------------------------------------------------------------------------------ Stay on top of everything new and different, both inside and around Java (TM) technology - register by April 22, and save $200 on the JavaOne (SM) conference, June 2-5, 2009, San Francisco. 300 plus technical and hands-on sessions. Register today. Use priority code J9JMT32. http://p.sf.net/sfu/p _______________________________________________ Alsa-user mailing list Alsa-user@xxxxxxxxxxxxxxxxxxxxx https://lists.sourceforge.net/lists/listinfo/alsa-user
