On Monday 08 December 2008 21:12, you wrote:> http://www.alsa-project.org/db/?f=cc5746b91bd1b83beb0d05b4b361fbd311061792>> mån 2008-12-08 klockan 20:42 +0100 skrev Nigel Henry:> > On Monday 08 December 2008 19:19, Mikael Larsson wrote:> > > Hello,> > > I have an 'ASUS A7U' laptop with a 'Realtek ALC660-VD' integrated> > > soundcard. A few nights ago I upgraded my system from 'fedora 8' to> > > 'fedora 10' and to make a long story short my system dosen't have> > > working audio any more.> > >> > > The soundcard gets detected and sound seams to by playing but there is> > > nothing coming out of either the headphones jack or from the built-in> > > speakers. (Just as if the built-in amplifier was shout off or> > > something...).> > > Adjusting the levels of different sound-sources in alsamixer seam to> > > work if I look at pulse-audio or jackd vu-meters, but still no sound> > > seam to manage getting out. (Not even static.)> > >> > > I remember having the same problem with 'fedora 8', until I realized> > > that my sound hardware only seamed to work with fedora kernels shipped> > > with 'alsa-driver-1.0.15' and by adding 'options snd-hda-intel> > > model=auto position_fix=1' to modprobe.conf> > > So I tried to compile the old 1.0.15 version off the alsa-driver on> > > 'fedora 10' but that seamed impossible (maybe just a fedora issue?) so> > > I guess I'm sort off stuck here.> > >> > > My question is dos anyone knew a way to compile the> > > 'alsa-driver-1.0.15' on 'fedora 10' with > > > 'kernel-2.6.27.5-117.fc10.x86_64' or any other way off making the> > > 'alsa-driver-1.0.18a' originally shipped with fedora work with my> > > sound-hardware?> > > Should I file a bug-report somewhere?> > >> > > Made some printouts off my system:> > > $ /sbin/lspci -v | grep Audio -A1> > > 00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia> > > Subsystem: ASUSTeK Computer Inc. Device 1339> > > --> > > 01:05.2 Audio device: ATI Technologies Inc Radeon X1200 Series Audio> > > Controller> > > Subsystem: ATI Technologies Inc Radeon X1200 Series Audio Controller> > > Flags: bus master, fast devsel, latency 64, IRQ 19> > >> > >> > > $ grep ^Codec /proc/asound/card?/codec*> > > /proc/asound/card0/codec#0:Codec: Realtek ALC660-VD> > > /proc/asound/card0/codec#1:Codec: Generic 1543 Si3054> > > /proc/asound/card1/codec#0:Codec: ATI ATI RS690/780 HDMI> > >> > >> > > $aplay -l> > > **** List of PLAYBACK Hardware Devices ****> > > card 0: SB [HDA ATI SB], device 0: ALC660-VD Analog [ALC660-VD Analog]> > > Subdevices: 1/1> > > Subdevice #0: subdevice #0> > > card 0: SB [HDA ATI SB], device 1: ALC660-VD Digital [ALC660-VD> > > Digital] Subdevices: 1/1> > > Subdevice #0: subdevice #0> > > card 0: SB [HDA ATI SB], device 6: Si3054 Modem [Si3054 Modem]> > > Subdevices: 1/1> > > Subdevice #0: subdevice #0> > > card 1: HDMI [HDA ATI HDMI], device 3: ATI HDMI [ATI HDMI]> > > Subdevices: 1/1> > > Subdevice #0: subdevice #0> >> > Hi Mikael.> >> > It may be worth disabling Pulseaudio temporarily as below.> >> > yum remove alsa-plugins-pulseaudio> >> > Your output from grepping the codecs shows 2 cards, which should be> > confirmed by running, cat /proc/asound/cards , and I know that pulseaudio> > has some problems with multiple cards.> >> > BTW, I thought that the F10 install came with alsa driver version 1.0.17,> > not 1.0.18a, which is the latest release of the driver.> >> > Of course you may just need to add the same options to> > /etc/modprobe.conf, as you had for the F8 install.> >> > I don't think you'll have any success in compiling the alsa driver 1.0.15> > against a 2.6.27 kernel.See below for supported kernels for the 1.0.15> > alsa driver.> >> > <quote from SUPPORTED_KERNELS file>> > The alsa-drivers in this package are designed for the following kernels:> >> > - Vanilla 2.6.22 or earlier> > - Vanilla 2.4.31 or earlier> > - Vanilla 2.2.26 or earlier> >> > It's not guaranteed that they work with any newer version than above> > or modified kernels by distributors.> > <end quote>> >> > Perhaps you'd like to go to the link below, and save the script as> > alsa-info.sh in your /home/user directory. Make it executable, then run> > it as. ./alsa-info.sh> > http://hg.alsa-project.org/alsa/raw-file/tip/alsa-info.sh> >> > This script will upload info about your machine, and particularly the> > sounds.> >> > Post back the link to the site where the data has been uploaded to.> >> > Best wishes.> >> > Nigel. Hi Mikael. The first thing I'd check out is the alsamixer settings to see if anything is muted or sliders need pushing up to get some sounds. F8, 9, and 10 have Pulseaudio installed as a soundserver, and if you open a terminal/Konsole, and just type alsamixer as user, you will no doubt only see the Pulseaudio volume control. Open alsamixer as below, and you should see all controls for the soundcard.alsamixer -D hw:0 Check for muted controls (the M key toggles mute/unmute), and push up any sliders like, Master, PCM, Front, CD. These are the usual ones that enable you to get sound output. Also. as you have more than 1 card listed, it may be worth disabling Pulseaudio, as I believe it can have problems when there is more than 1 soundcard. You can do this with the following command after su'ing to root.yum remove alsa-plugins-pulseaudio Please post your reply beneath mine, not at the top, and also make sure you don't only reply to me, but also CC the alsa user list, as there may be others that can help you with your problem. All the best. Nigel. If the reply that came to me didn't also reach the list, the link to the output of alsa-info.sh is below. http://www.alsa-project.org/db/?f=cc5746b91bd1b83beb0d05b4b361fbd311061792 ------------------------------------------------------------------------------SF.Net email is Sponsored by MIX09, March 18-20, 2009 in Las Vegas, Nevada.The future of the web can't happen without you. Join us at MIX09 to helppave the way to the Next Web now. Learn more and register athttp://ad.doubleclick.net/clk;208669438;13503038;i?http://2009.visitmix.com/_______________________________________________Alsa-user mailing listAlsa-user@xxxxxxxxxxxxxxxxxxxxxxxxxx://lists.sourceforge.net/lists/listinfo/alsa-user
