You can catch data with arecordmidi.
2008/10/19 Carl Bauer <carl.a.bauer@xxxxxxxxx>:> Ok. Maybe I'm not understanding something fundamental here. If so, I would> really appreciate it if someone could explain it to me. I have been told> twice now that I need to load a soundfont into my SB card. Why??? A> soundfont is just a collection of sounds to be played by midi instructions,> and I really don't care about 'sounds' at all at this point (i'm going to> use Zyn or QSynth anyway). Right now, I just want to see if the data being> sent by my keyboard is being received/processed by my soundcard. I know> there are simple ways of checking this, such as,>> amidi -p myport -d or> dd if=/dev/snd/midiC2D{0,1} bs=1>> (i think these should work). I have tried loading soundfonts into my card> with asfxload or whatever that program is called and nothing changed, of> course, because the problem is that my soundcard is not processing the midi> signals in the first place (unless the soundfont loading does some sort of> initialization of the Live Drive, but... then it should have worked, and it> didn't). I have gotten midi in to work with this soundcard on older versions> of fedora core (with older versions of alsa i'm sure).>>> On Sat, Oct 18, 2008 at 3:49 PM, Vedran Miletić <rivanvx@xxxxxxxxx> wrote:>>>> You need to load the soundfont, of course, and then connect input to>> sampler using qjackctl. There is no need to run jack all the time, it>> works without it too.>>>> 2008/10/18 Carl Bauer <carl.a.bauer@xxxxxxxxx>:>> > I am trying to get my Audigy 2 ZS card to recognize signals from my Korg>> > SP-200 keyboard. I am using the midi input jack on the audigy's live>> > drive>> > front panel thingy. I am using an up-to-date Fedora Core 9.>> >>> > The problems I have encountered and things I have already tried are>> > described best in this post:>> > http://forums.fedoraforum.org/showthread.php?t=198240>> >>> > I've seen this problem elsewhere:>> > http://ubuntuforums.org/showthread.php?t=476633>> >>> > Is midi in on this card supported by emu10k1?>> >>> > Thanks,>> > Carl>> >>> > Here is my sound system according to aadebug:>> >>> > ALSA Audio Debug v0.1.0 - Sat Oct 18 11:49:32 MDT 2008>> > http://alsa.opensrc.org/aadebug>> > http://www.gnu.org/licenses/gpl.txt>> >>> > Kernel ---------------------------------------------------->> > Linux localhost.localdomain 2.6.26.5-45.fc9.i686 #1 SMP Sat Sep 20>> > 03:45:00>> > EDT 2008 i686 i686 i386 GNU/Linux>> >>> > Loaded Modules -------------------------------------------->> > snd_seq_midi 9728 0>> > snd_emu10k1_synth 9600 0>> > snd_emux_synth 31488 1 snd_emu10k1_synth>> > snd_seq_virmidi 8832 1 snd_emux_synth>> > snd_seq_midi_emul 8960 1 snd_emux_synth>> > snd_emu10k1 127620 4 snd_emu10k1_synth>> > snd_rawmidi 21248 3 snd_seq_midi,snd_seq_virmidi,snd_emu10k1>> > snd_ac97_codec 93604 1 snd_emu10k1>> > snd_hda_intel 321692 2>> > snd_seq_dummy 6532 0>> > snd_seq_oss 29212 0>> > snd_seq_midi_event 9600 3 snd_seq_midi,snd_seq_virmidi,snd_seq_oss>> > snd_seq 44736 9>> >>> > snd_seq_midi,snd_emux_synth,snd_seq_virmidi,snd_seq_midi_emul,snd_seq_dummy,snd_seq_oss,snd_seq_midi_event>> > snd_pcm_oss 36480 0>> > snd_mixer_oss 16384 1 snd_pcm_oss>> > snd_pcm 60676 4>> > snd_emu10k1,snd_ac97_codec,snd_hda_intel,snd_pcm_oss>> > snd_seq_device 9740 8>> >>> > snd_seq_midi,snd_emu10k1_synth,snd_emux_synth,snd_emu10k1,snd_rawmidi,snd_seq_dummy,snd_seq_oss,snd_seq>> > snd_timer 20744 3 snd_emu10k1,snd_seq,snd_pcm>> > snd_util_mem 7296 2 snd_emux_synth,snd_emu10k1>> > snd_page_alloc 11016 3 snd_emu10k1,snd_hda_intel,snd_pcm>> > snd_hwdep 10244 3 snd_emux_synth,snd_emu10k1,snd_hda_intel>> > snd 46136 24>> >>> > snd_emux_synth,snd_seq_virmidi,snd_emu10k1,snd_rawmidi,snd_ac97_codec,snd_hda_intel,snd_seq_oss,snd_seq,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_device,snd_timer,snd_hwdep>> >>> > Modprobe Conf --------------------------------------------->> >>> > Proc Asound ----------------------------------------------->> > Advanced Linux Sound Architecture Driver Version 1.0.16.>> > 0 [Intel ]: HDA-Intel - HDA Intel>> > HDA Intel at 0xf8200000 irq 22>> > 1 [HDMI ]: HDA-Intel - HDA ATI HDMI>> > HDA ATI HDMI at 0xf5010000 irq 17>> > 2 [Audigy2 ]: Audigy2 - Audigy 2 ZS [SB0350]>> > Audigy 2 ZS [SB0350] (rev.4, serial:0x20021102) at>> > 0xd000, irq 18>> > 2: : timer>> > 3: : sequencer>> > 4: [ 0- 2]: digital audio capture>> > 5: [ 0- 1]: digital audio playback>> > 6: [ 0- 1]: digital audio capture>> > 7: [ 0- 0]: digital audio playback>> > 8: [ 0- 0]: digital audio capture>> > 9: [ 0- 2]: hardware dependent>> > 10: [ 0] : control>> > 11: [ 1- 3]: digital audio playback>> > 12: [ 1- 0]: hardware dependent>> > 13: [ 1] : control>> > 14: [ 2- 0]: hardware dependent>> > 15: [ 2- 1]: raw midi>> > 16: [ 2- 0]: raw midi>> > 17: [ 2- 4]: digital audio playback>> > 18: [ 2- 4]: digital audio capture>> > 19: [ 2- 3]: digital audio playback>> > 20: [ 2- 2]: digital audio playback>> > 21: [ 2- 2]: digital audio capture>> > 22: [ 2- 1]: digital audio capture>> > 23: [ 2- 0]: digital audio playback>> > 24: [ 2- 0]: digital audio capture>> > 25: [ 2] : control>> > 26: [ 2- 2]: hardware dependent>> > 27: [ 2- 2]: raw midi>> > 28: [ 2- 3]: raw midi>> > 00-02: HDA Codec 2>> > 01-00: HDA Codec 0>> > 02-00: EMU10K1 (FX8010)>> > 02-02: Emux WaveTable>> > 00-02: ALC882 Analog : ALC882 Analog : capture 2>> > 00-01: ALC882 Digital : ALC882 Digital : playback 1 : capture 1>> > 00-00: ALC882 Analog : ALC882 Analog : playback 1 : capture 1>> > 01-03: ATI HDMI : ATI HDMI : playback 1>> > 02-04: p16v : p16v : playback 1 : capture 1>> > 02-03: emu10k1 : Multichannel Playback : playback 1>> > 02-02: emu10k1 efx : Multichannel Capture/PT Playback : playback 8 :>> > capture>> > 1>> > 02-01: emu10k1 mic : Mic Capture : capture 1>> > 02-00: emu10k1 : ADC Capture/Standard PCM Playback : playback 32 :>> > capture 1>> > Client info>> > cur clients : 5>> > peak clients : 6>> > max clients : 192>> >>> > Client 0 : "System" [Kernel]>> > Port 0 : "Timer" (Rwe-)>> > Port 1 : "Announce" (R-e-)>> > Connecting To: 15:0>> > Client 14 : "Midi Through" [Kernel]>> > Port 0 : "Midi Through Port-0" (RWe-)>> > Client 15 : "OSS sequencer" [Kernel]>> > Port 0 : "Receiver" (-we-)>> > Connected From: 0:1>> > Client 24 : "Audigy 2 ZS [SB0350]" [Kernel]>> > Port 0 : "Audigy MPU-401 (UART)" (RWeX)>> > Port 32 : "Audigy MPU-401 #2" (RWeX)>> > Client 25 : "Emu10k1 WaveTable" [Kernel]>> > Port 0 : "Emu10k1 Port 0" (-We-)>> > Port 1 : "Emu10k1 Port 1" (-We-)>> > Port 2 : "Emu10k1 Port 2" (-We-)>> > Port 3 : "Emu10k1 Port 3" (-We-)>> >>> > Dev Snd --------------------------------------------------->> > controlC0 hwC1D0 midiC2D1 pcmC0D0p pcmC1D3p pcmC2D2c pcmC2D4p>> > controlC1 hwC2D0 midiC2D2 pcmC0D1c pcmC2D0c pcmC2D2p seq>> > controlC2 hwC2D2 midiC2D3 pcmC0D1p pcmC2D0p pcmC2D3p timer>> > hwC0D2 midiC2D0 pcmC0D0c pcmC0D2c pcmC2D1c pcmC2D4c>> >>> > CPU ------------------------------------------------------->> > model name : Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz>> > cpu MHz : 2000.000>> > model name : Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz>> > cpu MHz : 2000.000>> >>> > RAM ------------------------------------------------------->> > MemTotal: 2073896 kB>> > SwapTotal: 2031608 kB>> >>> > Hardware -------------------------------------------------->> > 00:00.0 Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM>> > Controller (rev 02)>> > 05:02.0 Multimedia audio controller: Creative Labs SB Audigy (rev 04)>> >>> >>> >>> >>> > ------------------------------------------------------------------------->> > This SF.Net email is sponsored by the Moblin Your Move Developer's>> > challenge>> > Build the coolest Linux based applications with Moblin SDK & win great>> > prizes>> > Grand prize is a trip for two to an Open Source event anywhere in the>> > world>> > http://moblin-contest.org/redirect.php?banner_id=100&url=/>> > _______________________________________________>> > Alsa-user mailing list>> > Alsa-user@xxxxxxxxxxxxxxxxxxxxx>> > https://lists.sourceforge.net/lists/listinfo/alsa-user>> >>> >>>>>>>>> -->> Vedran Miletić>>
-- Vedran Miletić-------------------------------------------------------------------------This SF.Net email is sponsored by the Moblin Your Move Developer's challengeBuild the coolest Linux based applications with Moblin SDK & win great prizesGrand prize is a trip for two to an Open Source event anywhere in the worldhttp://moblin-contest.org/redirect.php?banner_id=100&url=/_______________________________________________Alsa-user mailing listAlsa-user@xxxxxxxxxxxxxxxxxxxxxxxxxx://lists.sourceforge.net/lists/listinfo/alsa-user
