You need to load the soundfont, of course, and then connect input tosampler using qjackctl. There is no need to run jack all the time, itworks without it too. 2008/10/18 Carl Bauer <carl.a.bauer@xxxxxxxxx>:> I am trying to get my Audigy 2 ZS card to recognize signals from my Korg> SP-200 keyboard. I am using the midi input jack on the audigy's live drive> front panel thingy. I am using an up-to-date Fedora Core 9.>> The problems I have encountered and things I have already tried are> described best in this post:> http://forums.fedoraforum.org/showthread.php?t=198240>> I've seen this problem elsewhere:> http://ubuntuforums.org/showthread.php?t=476633>> Is midi in on this card supported by emu10k1?>> Thanks,> Carl>> Here is my sound system according to aadebug:>> ALSA Audio Debug v0.1.0 - Sat Oct 18 11:49:32 MDT 2008> http://alsa.opensrc.org/aadebug> http://www.gnu.org/licenses/gpl.txt>> Kernel ----------------------------------------------------> Linux localhost.localdomain 2.6.26.5-45.fc9.i686 #1 SMP Sat Sep 20 03:45:00> EDT 2008 i686 i686 i386 GNU/Linux>> Loaded Modules --------------------------------------------> snd_seq_midi 9728 0> snd_emu10k1_synth 9600 0> snd_emux_synth 31488 1 snd_emu10k1_synth> snd_seq_virmidi 8832 1 snd_emux_synth> snd_seq_midi_emul 8960 1 snd_emux_synth> snd_emu10k1 127620 4 snd_emu10k1_synth> snd_rawmidi 21248 3 snd_seq_midi,snd_seq_virmidi,snd_emu10k1> snd_ac97_codec 93604 1 snd_emu10k1> snd_hda_intel 321692 2> snd_seq_dummy 6532 0> snd_seq_oss 29212 0> snd_seq_midi_event 9600 3 snd_seq_midi,snd_seq_virmidi,snd_seq_oss> snd_seq 44736 9> snd_seq_midi,snd_emux_synth,snd_seq_virmidi,snd_seq_midi_emul,snd_seq_dummy,snd_seq_oss,snd_seq_midi_event> snd_pcm_oss 36480 0> snd_mixer_oss 16384 1 snd_pcm_oss> snd_pcm 60676 4> snd_emu10k1,snd_ac97_codec,snd_hda_intel,snd_pcm_oss> snd_seq_device 9740 8> snd_seq_midi,snd_emu10k1_synth,snd_emux_synth,snd_emu10k1,snd_rawmidi,snd_seq_dummy,snd_seq_oss,snd_seq> snd_timer 20744 3 snd_emu10k1,snd_seq,snd_pcm> snd_util_mem 7296 2 snd_emux_synth,snd_emu10k1> snd_page_alloc 11016 3 snd_emu10k1,snd_hda_intel,snd_pcm> snd_hwdep 10244 3 snd_emux_synth,snd_emu10k1,snd_hda_intel> snd 46136 24> snd_emux_synth,snd_seq_virmidi,snd_emu10k1,snd_rawmidi,snd_ac97_codec,snd_hda_intel,snd_seq_oss,snd_seq,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_device,snd_timer,snd_hwdep>> Modprobe Conf --------------------------------------------->> Proc Asound -----------------------------------------------> Advanced Linux Sound Architecture Driver Version 1.0.16.> 0 [Intel ]: HDA-Intel - HDA Intel> HDA Intel at 0xf8200000 irq 22> 1 [HDMI ]: HDA-Intel - HDA ATI HDMI> HDA ATI HDMI at 0xf5010000 irq 17> 2 [Audigy2 ]: Audigy2 - Audigy 2 ZS [SB0350]> Audigy 2 ZS [SB0350] (rev.4, serial:0x20021102) at> 0xd000, irq 18> 2: : timer> 3: : sequencer> 4: [ 0- 2]: digital audio capture> 5: [ 0- 1]: digital audio playback> 6: [ 0- 1]: digital audio capture> 7: [ 0- 0]: digital audio playback> 8: [ 0- 0]: digital audio capture> 9: [ 0- 2]: hardware dependent> 10: [ 0] : control> 11: [ 1- 3]: digital audio playback> 12: [ 1- 0]: hardware dependent> 13: [ 1] : control> 14: [ 2- 0]: hardware dependent> 15: [ 2- 1]: raw midi> 16: [ 2- 0]: raw midi> 17: [ 2- 4]: digital audio playback> 18: [ 2- 4]: digital audio capture> 19: [ 2- 3]: digital audio playback> 20: [ 2- 2]: digital audio playback> 21: [ 2- 2]: digital audio capture> 22: [ 2- 1]: digital audio capture> 23: [ 2- 0]: digital audio playback> 24: [ 2- 0]: digital audio capture> 25: [ 2] : control> 26: [ 2- 2]: hardware dependent> 27: [ 2- 2]: raw midi> 28: [ 2- 3]: raw midi> 00-02: HDA Codec 2> 01-00: HDA Codec 0> 02-00: EMU10K1 (FX8010)> 02-02: Emux WaveTable> 00-02: ALC882 Analog : ALC882 Analog : capture 2> 00-01: ALC882 Digital : ALC882 Digital : playback 1 : capture 1> 00-00: ALC882 Analog : ALC882 Analog : playback 1 : capture 1> 01-03: ATI HDMI : ATI HDMI : playback 1> 02-04: p16v : p16v : playback 1 : capture 1> 02-03: emu10k1 : Multichannel Playback : playback 1> 02-02: emu10k1 efx : Multichannel Capture/PT Playback : playback 8 : capture> 1> 02-01: emu10k1 mic : Mic Capture : capture 1> 02-00: emu10k1 : ADC Capture/Standard PCM Playback : playback 32 : capture 1> Client info> cur clients : 5> peak clients : 6> max clients : 192>> Client 0 : "System" [Kernel]> Port 0 : "Timer" (Rwe-)> Port 1 : "Announce" (R-e-)> Connecting To: 15:0> Client 14 : "Midi Through" [Kernel]> Port 0 : "Midi Through Port-0" (RWe-)> Client 15 : "OSS sequencer" [Kernel]> Port 0 : "Receiver" (-we-)> Connected From: 0:1> Client 24 : "Audigy 2 ZS [SB0350]" [Kernel]> Port 0 : "Audigy MPU-401 (UART)" (RWeX)> Port 32 : "Audigy MPU-401 #2" (RWeX)> Client 25 : "Emu10k1 WaveTable" [Kernel]> Port 0 : "Emu10k1 Port 0" (-We-)> Port 1 : "Emu10k1 Port 1" (-We-)> Port 2 : "Emu10k1 Port 2" (-We-)> Port 3 : "Emu10k1 Port 3" (-We-)>> Dev Snd ---------------------------------------------------> controlC0 hwC1D0 midiC2D1 pcmC0D0p pcmC1D3p pcmC2D2c pcmC2D4p> controlC1 hwC2D0 midiC2D2 pcmC0D1c pcmC2D0c pcmC2D2p seq> controlC2 hwC2D2 midiC2D3 pcmC0D1p pcmC2D0p pcmC2D3p timer> hwC0D2 midiC2D0 pcmC0D0c pcmC0D2c pcmC2D1c pcmC2D4c>> CPU -------------------------------------------------------> model name : Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz> cpu MHz : 2000.000> model name : Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz> cpu MHz : 2000.000>> RAM -------------------------------------------------------> MemTotal: 2073896 kB> SwapTotal: 2031608 kB>> Hardware --------------------------------------------------> 00:00.0 Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM> Controller (rev 02)> 05:02.0 Multimedia audio controller: Creative Labs SB Audigy (rev 04)>>>> -------------------------------------------------------------------------> This SF.Net email is sponsored by the Moblin Your Move Developer's challenge> Build the coolest Linux based applications with Moblin SDK & win great> prizes> Grand prize is a trip for two to an Open Source event anywhere in the world> http://moblin-contest.org/redirect.php?banner_id=100&url=/> _______________________________________________> Alsa-user mailing list> Alsa-user@xxxxxxxxxxxxxxxxxxxxx> https://lists.sourceforge.net/lists/listinfo/alsa-user>> -- Vedran Miletić-------------------------------------------------------------------------This SF.Net email is sponsored by the Moblin Your Move Developer's challengeBuild the coolest Linux based applications with Moblin SDK & win great prizesGrand prize is a trip for two to an Open Source event anywhere in the worldhttp://moblin-contest.org/redirect.php?banner_id=100&url=/_______________________________________________Alsa-user mailing listAlsa-user@xxxxxxxxxxxxxxxxxxxxxxxxxx://lists.sourceforge.net/lists/listinfo/alsa-user
