Aggelos Manousidis wrote: > on 07/01/2008 01:23 AM stan wrote the following: > >> This is a long shot, but you can try playing around with the model >> parameters to see if you can find one that matches your device better. >> >> Each codec may have a model table for different configurations. >> If your machine isn't listed there, the default (usually minimal) >> configuration is set up. You can pass "model=<name>" option to >> specify a certain model in such a case. There are different >> models depending on the codec chip. >> >> Model name Description >> ---------- ----------- >> ALC880 >> 3stack 3-jack in back and a headphone out >> 3stack-digout 3-jack in back, a HP out and a SPDIF out >> 5stack 5-jack in back, 2-jack in front >> >> > <snip> > Stan, what file has this info ? > > It is in the alsa-driver tar archive, under alsa-kernel/Documentation, and in ALSA-Configuration.txt. Probably somewhere on the alsa-project website as well, though I haven't looked for it there. ------------------------------------------------------------------------- Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php _______________________________________________ Alsa-user mailing list Alsa-user@xxxxxxxxxxxxxxxxxxxxx https://lists.sourceforge.net/lists/listinfo/alsa-user
