on 07/01/2008 01:23 AM stan wrote the following: > This is a long shot, but you can try playing around with the model > parameters to see if you can find one that matches your device better. > > Each codec may have a model table for different configurations. > If your machine isn't listed there, the default (usually minimal) > configuration is set up. You can pass "model=<name>" option to > specify a certain model in such a case. There are different > models depending on the codec chip. > > Model name Description > ---------- ----------- > ALC880 > 3stack 3-jack in back and a headphone out > 3stack-digout 3-jack in back, a HP out and a SPDIF out > 5stack 5-jack in back, 2-jack in front > <snip> Stan, what file has this info ? ------------------------------------------------------------------------- Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php _______________________________________________ Alsa-user mailing list Alsa-user@xxxxxxxxxxxxxxxxxxxxx https://lists.sourceforge.net/lists/listinfo/alsa-user
