At Tue, 4 Mar 2008 15:03:15 +0000, James Courtier-Dutton wrote: > > > > Now that we have these dB gain levels, we could potentially set all > > > mixer controls to 0dB, i.e. not gain and not attenuation, with only > > > the master output control being set to a lower value so as to avoid > > > ears breaking. > > > > > > I don't know where the master output control is. Do you see it in the > > outputs of 'amixer' or 'amixer contents' I provided in one of my > > previous messages? > > > version 1.0.16 of amixer will have the dB values. > You also have to have version 1.0.16 of alsa-driver and alsa-lib. hdspm driver still doesn't support TLV dB information. In addition, rme9652/hdsp/hdspm drivers use control elements in a non-standard way for indirect accessing, so each mixer value isn't visible in amixer or alsactl. Takashi ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Alsa-user mailing list Alsa-user@xxxxxxxxxxxxxxxxxxxxx https://lists.sourceforge.net/lists/listinfo/alsa-user
