Daniel, With "amixer -c n" where the card number (n) is > 0, I get usage messages . . "aumix -q" gives me: vol 97, 97, P pcm 100, 100 speaker 0, 0 line 0, 0, P mic 100, 100, R cd 0, 0, P igain 100, 100 line1 0, 0, P dig1 0, 0 phin 0, 0, P phout 100, 100, P video 100, 100, P Phil. On Tue, 2008-02-26 at 09:20 +0000, Daniel Sanabria wrote: > Do you have more than one soundcard? have you try -c 1, -c 2 etc ...? > > also I've read we must have the IGAin control all the way up to > 100 ... you can change this with aumix. > > But we still need to control the AC97 level ... hope someone is able > to see this and give us a hand. > > On 25/02/2008, Phil Rhoades <phil@xxxxxxxxxxxxx> wrote: > Daniel, > > I also do not see this control with alsamixer and the only > thing I see > on my similar (non-working) system with "amixer -c 0" is: > > Simple mixer control 'IEC958 Playback AC97-SPSA',0 > Capabilities: volume volume-joined > Playback channels: Mono > Capture channels: Mono > Limits: 0 - 3 > Mono: 3 [100%] > > > Phil. > > > > On Mon, 2008-02-25 at 15:52 +0000, Daniel Sanabria wrote: > > any ideas? ... anyone? > > > > On 17/02/2008, Daniel Sanabria <sanabria.d@xxxxxxxxx> wrote: > > now from > http://alsa.opensrc.org/index.php/Record_from_mic I > > read the following: > > > > Comment from reader: For me, the instructions above > did not > > still cut it. I had to turn a control "AC97" to 100% > (in > > addition to Mic and Capture to 100%). > > > > I'm I supposed to see the AC97 control? where can I > find it? > > > > > > On 17/02/2008, Daniel Sanabria > <sanabria.d@xxxxxxxxx> wrote: > > Yes this is a PC mic (plantronics) and > you're right it > > doesn't have any source of power, it takes > it from the > > PC. However setting V_REFOUT to 3,7 or 2.25 > doesn't > > seem to make a difference. > > > > On 16/02/2008, James Shatto > <Shadow_7@xxxxxxxxxxxxx> > > wrote: > > > Simple mixer control 'V_REFOUT',0 > > > Capabilities: enum > > > Items: 'High-Z' '3.7 V' '2.25 V' > '0 V' > > > Item0: '0 V' > > > > What type of mic are we > talking? Electret > > type mics(the kind that most PC > style mics > > seem to be/use) need a > voltage(called a bias > > voltage, or plug-in power for voice > > recorders). Without the voltage you > need a > > battery box. Set it to 3.7V, if you > > can. 2.25 V should also work. 0V > and High-Z > > would be my last choices. > > > > HTH > > > > > ------------------------------------------------------------------------- > > This SF.net email is sponsored by: > Microsoft > > Defy all challenges. Microsoft(R) > Visual > > Studio 2008. > > > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ > > > _______________________________________________ > > Alsa-user mailing list > > Alsa-user@xxxxxxxxxxxxxxxxxxxxx > > > https://lists.sourceforge.net/lists/listinfo/alsa-user > > > > > > > > > > > ------------------------------------------------------------------------- > > This SF.net email is sponsored by: Microsoft > > Defy all challenges. Microsoft(R) Visual Studio 2008. > > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ > > _______________________________________________ Alsa-user > mailing list Alsa-user@xxxxxxxxxxxxxxxxxxxxx > https://lists.sourceforge.net/lists/listinfo/alsa-user > > -- > > Philip Rhoades > > Pricom Pty Limited (ACN 003 252 275 ABN 91 003 252 275) > GPO Box 3411 > Sydney NSW 2001 > Australia > Fax: +61:(0)2-8221-9599 > E-mail: phil@xxxxxxxxxxxxx > > -- Philip Rhoades Pricom Pty Limited (ACN 003 252 275 ABN 91 003 252 275) GPO Box 3411 Sydney NSW 2001 Australia Fax: +61:(0)2-8221-9599 E-mail: phil@xxxxxxxxxxxxx ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Alsa-user mailing list Alsa-user@xxxxxxxxxxxxxxxxxxxxx https://lists.sourceforge.net/lists/listinfo/alsa-user
