Hello, I recently acquired this interface and compiled the latest stable versions (1.0.16) of alsa-driver, alsa-firmware, alsa-lib and alsa-utils. For the moment, I can achieve playback through this interface. However, I have two little problems: 1) I am not able to change the sampling rate at which the interface operates, under Linux 2) (the most important one) While playing back, I can hear some periodic series of clicks. They last about 1-2 seconds and are not very loud, but not silent enough to be ignored ;) This happens at both the sampling rates that the driver currently supports: - at 44.1kHz, the serie of clicks occurs once at about 25-30 seconds - at 48kHz, this interval changes to about 35 seconds. This problem seems to be somehow related also to the material played back, because I generated a 'silence' wav file and the clicks do not occur when playing back this one, but are always appearing in normal (audible) material. Well, I would like to know if there is any way to avoid this issue (or at least, what is the cause?). What I do know is that I'm not the only one experiencing this type of problem, but it is very unclear to me if anybody actually managed to get a *totally* clean playback, without these periodic clicks. Thanks, Adi ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Alsa-user mailing list Alsa-user@xxxxxxxxxxxxxxxxxxxxx https://lists.sourceforge.net/lists/listinfo/alsa-user
