On 13/02/2008, Stancu Adrian <adrian.stancu.82@xxxxxxxxx> wrote: > Hello, > > I recently acquired this interface and compiled the latest stable > versions (1.0.16) of alsa-driver, alsa-firmware, alsa-lib and > alsa-utils. > > For the moment, I can achieve playback through this interface. > However, I have two little problems: > 1) I am not able to change the sampling rate at which the interface > operates, under Linux > 2) (the most important one) While playing back, I can hear some > periodic series of clicks. They last about 1-2 seconds and are not > very loud, but not silent enough to be ignored ;) This happens at both > the sampling rates that the driver currently supports: > - at 44.1kHz, the serie of clicks occurs once at about 25-30 seconds > - at 48kHz, this interval changes to about 35 seconds. > This problem seems to be somehow related also to the material played > back, because I generated a 'silence' wav file and the clicks do not > occur when playing back this one, but are always appearing in normal > (audible) material. > Well, I would like to know if there is any way to avoid this issue (or > at least, what is the cause?). What I do know is that I'm not the only > one experiencing this type of problem, but it is very unclear to me if > anybody actually managed to get a *totally* clean playback, without > these periodic clicks. > > Thanks, > Adi > Currently, this device is not really supported. It still needs development work done on it in order to use different rates. James ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Alsa-user mailing list Alsa-user@xxxxxxxxxxxxxxxxxxxxx https://lists.sourceforge.net/lists/listinfo/alsa-user
