---------- Forwarded message ----------
From: Quasi Steady State <meelvoortim@xxxxxxxxx>
Date: Jan 15, 2008 10:35 AM
Subject: Configure sound card for hundreds devices at once
To: alsa-user@xxxxxxxxxxxxxxxxxxxxx.
Hi all,
I have an problem with automatic configuring the volume levels with ALSA.
I made a Linux system with only a kernel, busybox and some library's.
The linux system must be installed on the exact same hardware like hundreds times.
The first time I installed ALSA (static compiled in the kernel) I must enable (un-mute) the volume levels in 'alsamixer'.
Then I stored the levels with 'alsctl store'.
Everytime the system is booting I run the command 'alsactl -F restore'.
Everything goes perfect. But if I change the harddisk (flash-card) from the device to another (same hardware) device I get an error during booting:
Error if 'alsactl -F restore ' is run I get the following errors:
1. alsactl: set_control:970: failed to obtain info for control #3 (No such file or directory)
2. alsactl: set_control:1085: bad control.16.value type
Error 1 occures 11 times.
I run kernel 2.6.23.1.
Does someone have an idea what is going wrong?
thanx in advance.
P.S. If i run alsamixer on the new device and save the settings. Everything is perfect. But if I change the harddisk (flash-card) back to another device I have the same problem.
From: Quasi Steady State <meelvoortim@xxxxxxxxx>
Date: Jan 15, 2008 10:35 AM
Subject: Configure sound card for hundreds devices at once
To: alsa-user@xxxxxxxxxxxxxxxxxxxxx.
Hi all,
I have an problem with automatic configuring the volume levels with ALSA.
I made a Linux system with only a kernel, busybox and some library's.
The linux system must be installed on the exact same hardware like hundreds times.
The first time I installed ALSA (static compiled in the kernel) I must enable (un-mute) the volume levels in 'alsamixer'.
Then I stored the levels with 'alsctl store'.
Everytime the system is booting I run the command 'alsactl -F restore'.
Everything goes perfect. But if I change the harddisk (flash-card) from the device to another (same hardware) device I get an error during booting:
Error if 'alsactl -F restore ' is run I get the following errors:
1. alsactl: set_control:970: failed to obtain info for control #3 (No such file or directory)
2. alsactl: set_control:1085: bad control.16.value type
Error 1 occures 11 times.
I run kernel 2.6.23.1.
Does someone have an idea what is going wrong?
thanx in advance.
P.S. If i run alsamixer on the new device and save the settings. Everything is perfect. But if I change the harddisk (flash-card) back to another device I have the same problem.
------------------------------------------------------------------------- Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace
_______________________________________________ Alsa-user mailing list Alsa-user@xxxxxxxxxxxxxxxxxxxxx https://lists.sourceforge.net/lists/listinfo/alsa-user
