At Tue, 12 Jun 2007 23:49:23 -0700, Eran Guendelman wrote: > > > So, we need to add a new model. Could you give the output of "lspci > > -nv", too? We need PCI SSID to identify the device. Then I can write > > a patch to try. > > 00:1b.0 Class 0403: 8086:27d8 (rev 01) > Subsystem: 1028:01d7 > Flags: bus master, fast devsel, latency 0, IRQ 233 > Memory at efffc000 (64-bit, non-prefetchable) [size=16K] > Capabilities: [50] Power Management version 2 > Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ > Queue=0/0 Enable- > Capabilities: [70] Express Unknown type IRQ 0 > Capabilities: [100] Virtual Channel > Capabilities: [130] Unknown (5) OK, looks fine. Did you try my patch? > >> - Does the snd_hda_intel driver currently (or will it eventually) > >> support dynamic switching so I can switch from the Mic In to Line In or > >> to Rear Speakers Out, etc, just like in the Windows driver? > > > > Hm? It should have already the switches, "Line In As Output" and "Mic > > As Output"... > > I did see those when I tried the 3stack mode, but in my current fix > (modifying "ref" with my pin configs) I don't get such options in the > mixer. Any idea what I would need to do to get it to add these switches > to the mixer? This is the output from "amixer controls" > > numid=8,iface=MIXER,name='Master Playback Switch' > numid=7,iface=MIXER,name='Master Playback Volume' > numid=13,iface=MIXER,name='PCM Playback Volume' > numid=6,iface=MIXER,name='Front Playback Switch' > numid=5,iface=MIXER,name='Front Playback Volume' > numid=3,iface=MIXER,name='Capture Switch' > numid=2,iface=MIXER,name='Capture Volume' > numid=9,iface=MIXER,name='IEC958 Playback Con Mask' > numid=10,iface=MIXER,name='IEC958 Playback Pro Mask' > numid=11,iface=MIXER,name='IEC958 Playback Default' > numid=12,iface=MIXER,name='IEC958 Playback Switch' > numid=14,iface=MIXER,name='Digital Capture Volume' > numid=1,iface=MIXER,name='Input Source' > numid=4,iface=MIXER,name='Mux Capture Volume' Could you show the kernel message regarding pin detections (appearing only when debug options is set)? The mic/line-in output switches appear only when - line_outs are less than 3 (usually 1) - line and mic (not fmic or fline) inputs are found Takashi ------------------------------------------------------------------------- This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ _______________________________________________ Alsa-user mailing list Alsa-user@xxxxxxxxxxxxxxxxxxxxx https://lists.sourceforge.net/lists/listinfo/alsa-user
